Setting fail safe with a spektrum 2.4 radio on a losi 8ight t rtr 👍👍👍⛽️⛽️

[@Ryan-gf3jf]

Nice Vid! I had mine set it worked when i tested it and when the time came it didnt work the baja was a runnaway! LOL

[@evildiesel2425]

Awesome video! Very easy to understand and great information!

[@Dmarr75]

Thanks for the tip

[@awaisbhalli]

What u r showing is how to setup no signal failsafe. What about receiver low battery failsafe ? I just bought this buggy and i am looking for a failsafe that which activates on low receiver battery . Any recommendations!

[@smileyp4535]

Lmao why would the factory put it in there but not have it activated by default? Good thing we got you here for those who need it Willy! 😎👍

[@ikariku]

Great! thanks for the tip!

[@d3et1roi3t]

Just finished break in my on 8ight t rtr and steering servo locked up half way thru first tank of gas. (1st tank after breakin) Was it the endpoint not set correctly? Or just junk servo?

[@Matthewstoychest]

Detroiit 313 I doubt it was an end point issue if you are using the stock radio it came with as it has no end point adjustment. I will say that my throttle servo started feeling very sloppy after about a month of running the truck. I changed out both servos on the truck. The stock servos suck. They are plastic gears with bushings and no bearings. I would advise just to change both the servos.

[@d3et1roi3t]

@@Matthewstoychest What are the best choices for the money? Was looking at the protek 170sbl but not sure i want to spend that much..

[@Matthewstoychest]

Detroiit 313 I use Savox SC-1257TG. They are not that much. They are very fast and strong. I have no complaints about them.

[@d3et1roi3t]

@@Matthewstoychest It says that 1257tg is 138oz @6v. Thats sufficient for steering a 1/8 scale truggy?

[@Matthewstoychest]

Detroiit 313 yes. More is always better but for not spending a lot of money these work well

[@cmbushfl]

Does it come with it the plug and do i plug it in the 3rd channel ? Bc i just ordered the losi buggy .21 and do i put the plug in 3rd channel and does it come with it ? Plz let me know thank u

[@Matthewstoychest]

christina bush yes it does come with the bind plug. You have to put the bind plug in the power/bind port. On both my truggy and buggy the truck was powered Through the 3rd channel. So the bind port was Open and all you had to do was plug in the bind plug.

[@pitbikecookracing3324]

Thanks brother

[@bradleypendleton202]

Nice dude

[@rasheedsingh9730]

Thanks