BCA M16A4 HBAR Meltdown

[@GoldenWebb]

If any manufacturer has a weapon you would like seen reviewed or a tested in a meltdown, tag them in the comments or contact us!

[@جعفرمحمدالباقر]

يا اخي لماذا تذوب القبضه الأماميه اليست مصنوعه من البلاستك الحديدي

[@rangetoolcompany]

Love you stuff. Obviously the plastic handguards don't get too far. There was issues after about the 3 mag. Crazy with a long heavy barrel. Hmmm. Good job!

[@BeardOperator]

So everyone not from the south will know, the “far” extinguisher is a device that puts small fires out at a small to medium distance away. Just letting you know.

[@GoldenWebb]

🤣🤣 Thank you for that translation!

[@C.dieslevonankwek7]

Sire cream is the white crap we don't want on a nachos bell grande

[@timothyellis596]

☠

[@hansblitz7770]

"Right chair" Not a seat, but, right "there"

[@GoldenWebb]

More like Saer creme

[@heathturnbow3922]

Ready to see that PWS upper meltdown!! Thanks for the great content!!!

[@wyattweiman9103]

Here from mid teir snobs 😎 waiting for the PWS!!

[@facerapi2920]

Here from there as well

[@mattbirx4311]

Frens

[@jamesbingus7232]

One of the dawgs

[@dennispierson4083]

Same,,, came running to the Tube to witness this greatness 😂

[@psackett1000]

Nice to see the squad on other platforms

[@notjaisavage740]

Barrell held up really well, good call calling it quits when you did.

[@GoldenWebb]

Yea no joke!

[@siposcsepel]

@@GoldenWebb Do a PWS Meltdown! 😊

[@jakek09]

I like how u keep upping the protective level of your kit.

[@GoldenWebb]

We try to stay as protective as possible. Anytime we get a new idea we use it

[@alphapoor634]

Thats impressive for a 300 bean upper. Too bad it wasnt paired with one of BCAs metal HGs cause Im betting it would have easily ran a few hundred rounds more.

[@4g63mark]

Agreed 100%

[@GoldenWebb]

We will be doing another BCA soon, M4 16 inch but it also has plastic grips

[@shanelumsdon11112]

​@@GoldenWebbsubbed

[@boygonewhoopdataZZ]

​@@GoldenWebbtake the olastic stuff off 😂 i think iv8888also started doing that

[@Whitetail_Armory]

I own several BCA uppers including the m16a4 upper shown in this video. Cool to see them hanging in there with more expensive brands. Thanks for the video!

[@Whitetail_Armory]

Would be cool to see a follow up video on this upper after inspection.

[@GoldenWebb]

It was hanging in barley. It did do okay but a metric ton of failure

[@Whitetail_Armory]

@@GoldenWebb Well it didn't shoot a bullet through the top of the barrel so thats a plus lol

[@GoldenWebb]

@@Whitetail_Armory it sure is!

[@paulh6101]

It was sent from bca. U don't think this upper got a little tlc?

[@Munive556]

You should do a Colt LE6920 meltdown.

[@BradfordRMcKnight]

Why? I don’t understand why people want to see meltdowns with plastic handgaurds.

[@Polarbear-nq9nd]

second that. a 6921 at best for the OG M4 Vibe

[@magaman3048]

THIS

[@rifleshooterchannel208]

@@Polarbear-nq9ndCrane already did this. Video has been on KZbin for over 8 years.

[@Polarbear-nq9nd]

@@rifleshooterchannel208 two times is better than one in that regard

[@Echophone2046]

For a sec. I thought it's BCM upper, but I guess that's something I'd like to see in the future.

[@GoldenWebb]

We’re trying to get one brother!

[@benjaminwells3330]

@@GoldenWebb YES

[@DoSe420]

​@@GoldenWebbwould love to see where it stands since I just built one.

[@IkfNorCalChamp]

I’ve been asking for a BCM meltdown since the beginning

[@merlin704]

My first thought soon as I saw the fire around the Delta Ring, the barrel isn't seated all the way......but I could be wrong. Be nice to see a follow-up on this upper.

[@GoldenWebb]

I need to take it apart to see myself. I didn’t know we had that much fire coming out of the back of the barrel until we started editing the footage

[@browniesfox]

Could also be a small ruptured in the gas tube near it? A dissection of the upper would be cool

[@4g63mark]

Agreed. Ruptured gas tube is highly likely​@@browniesfox

[@TerminalM193]

It was just the plastic handguard melting. That puppy would have kept running just fine if they squirt some oil in the action.

[@merlin704]

@@TerminalM193 It started doing it at the 5th magazine BEFORE the handguard caught on fire......

[@user-ps7ou9so2h]

BCA makes Desent rifles i have one 556 i would use for my back to my BCM ,but started with BCA & there TLC uppers or rifles ,meening take the time to check the head space & some blue lock tight for hand rail i all i ever needed to do with my 4 uppers & change out a few springs

[@Waynebrady22]

Would love if you would work with SOTAR and sent them every upper afterwards for a full tear down. Would be great content for everyone

[@glennpearson3056]

Came here to say the same thing.

[@GoldenWebb]

If they contact me I’d consider something with them.

[@kevinpavlich4136]

This is a great idea!

[@eugenetillery5499]

I have a lot of respect for all of you guys. The biggest take a-way that I get from the testing is not all high-end ARs or autos can make it to 1,000 rounds of automatic fire.

[@animalmother556x45]

....it's almost like....barrel profile matters a lot for lengthy sessions of full auto. Who woulda thought that a heavy barrel could pass more rounds through it than a thinner one?!?!

[@hansblitz7770]

It's a prefect thing to worry about for the 99.9% of people who make the biggest deal about this who don't own a full auto lower and never will.

[@GoldenWebb]

But we see that at the 600 round mark she was literally about to fall apart.

[@animalmother556x45]

@@GoldenWebb But the barrel didn't rupture.

[@hellishcyberdemon7112]

@@hansblitz7770 The only reason they dont is dumb legislation thats removes peoples rights and fudds who wanna protect their 30k+ investments, im sure if we advocate and encourage for people to own full autos, then people might learn

[@user-ps7ou9so2h]

620 seems to be right on par with other melt down videos ,yet REEENO MAY cant get 1 to run more then a few rounds & bashes BCA ,I am looking to get me one of those magazine cooling fans that was widely available & seems i cant find the one made by caldwell so i can get back to shooting faster & but it seems just a great tool to use to keep the barrel cool ,couse we know what kills them heat,great video Be safe

[@GoldenWebb]

I appreciate it brother! Thank you!

[@Miohunter444]

That video Reno made was just stupid, I unsubbed right there. He just has a hair up his ass for BCA. GoldenWebb gives them a fair test.

[@steamsoldier]

Another great meltdown that one was wild, thank you guys! 👍 💪👍

[@GoldenWebb]

Thank you my friend!

[@grumpyoldretiredcop8382]

You know you're about at the end of the trail when you get a cookoff. I've managed it with a Franklin BFSIII trigger; it was a bit of a surprise when it happened. I'd say that for an inexpensive upper, that BCA held together pretty well. It would be interesting to see the post-mortem.

[@GoldenWebb]

It did, we might just do that

[@DougieAllen-e2b]

From eastern Kentucky, not there rn. currently stationed in Louisiana and boy does it bring back memories hearing someone else with that Appalachia Accent, also a gun nut as well!

[@GoldenWebb]

Hahahaha thank you brother! What part? We are in the London/Manchester area

[@peachfuds]

You should get a tripod with an arca rail and get these guns flat so you don't let one fly above the backstop, and you aren't hugging a potentially dangerous firearm against your torso. I know you have body armor, but when things explode, there's no predicting where the pieces will fly. Great video, man!!!

[@GoldenWebb]

These heavier ones were gonna have to get a pod for them, no questions asked. Glad you liked it brother

[@notjaisavage740]

Honestly it would be way safer for you to set them up on a tripod, way less contact with the rifle

[@jimgenksxxl]

Thank you my brother, I really appreciate your services..

[@GoldenWebb]

Glad I could help brother!

[@ChrisKonstantacos]

it done had 600 more life in it!! yous called it to soon.

[@justbandit5572]

i think a visual of the upper after the meltdown would be super interesting

[@GoldenWebb]

We might touch back on this later!

[@NoahBranch503]

20 inch hbar with iron sights and collapsible stock that right there is a awesome setup long range short range thats the way it should be setup plus the sights never run out of power great video

[@Polarbear-nq9nd]

comment for algorhytm because you guys are doing the right work

[@GoldenWebb]

I sure do appreciate it brother!

[@ragnarok5056]

Very cool, we could clearly see the barrel here is getting seriously overgassed at the end due to gas port errosion, wich will then again lead to high pressure cycling rate and will cause malfunctioning, my best guess here is pore metal composition in the barrel, and prolly overgapped in the barrel extention wich shows gas blowby in the barrel nut section when heated up. Awsome vide very educational 🤘🤘🤩🔥

[@GoldenWebb]

Thank you brother! I’m glad you liked it

[@ethan5.56]

Tighten the barrel nut and remove the handguards. Send it!

[@GoldenWebb]

Hahahaha I heard that’s

[@timewave02012]

Carbon fiber handguard would be interesting. They're really nice for weight savings, and not being hot or cold in hot/cold weather.

[@GoldenWebb]

That’s is true!

[@MrAndroidDYemen]

You need to have an explanation for everything that happens. It is a good idea to place a bulletin board indicating the number of bullets that were used. Your channel is good and unique, keep it up

[@km1157]

Love to see what to see the inside the upper looks like.

[@jamal4381]

reading this comment gave me a stroke.

[@WhatAboutTheIndividual]

Good one.

[@GoldenWebb]

🤣🤣🤣 I’ve had a stroke

[@Callsign_Foxtrot]

That baby was spittin' fire i tell ya, FIRE!!

[@GoldenWebb]

Yessir!

[@mk760fan3]

I know you only have the one lower to use but when running a 20+ inch barrel with a rifle length gas system you should be running a H3 or H6 buffer. Those uppers are designed to work with a rifle length and weight buffer. Will it work with an H2 in a carbine length tube? Of course, but with a higher cyclic rate and higher likelihood of bolt bounce showing up. Especially at higher cyclic rates... Slow it down a little and live a little longer.

[@caseysage2454]

What a cook off! Have yall looked at the Hard charger charging handle ? prob little easier to work that action with them thick gloves glad you boys are in one piece!

[@GoldenWebb]

We try to run them stock from factory but I guess I do need to just run one charging handle for these meltdowns

[@potatoman1996]

This was awesome! I wonder if a better BCG like a micro best would of let the upper go farther

[@GoldenWebb]

The BCG was fine. Gas issues is what killed the upper

[@lathhinton5711]

Absolutely love these videos! Keep rockin boys.

[@GoldenWebb]

Thank you brother

[@kodymoss1071]

If you guys get the chance, could you possibly do the DD 14.5 Brownells exclusive with the SOCOM barrel? I want to see how long it will last with a heavier barrel.

[@GoldenWebb]

We will try to one day brother!

[@kanaancross317]

Nice, I wonder if they would last longer if it didn’t use the plastic hand guards

[@jamesmason4364]

I bet if it had a metal handguard then a plastic one that melted, it would've gone at least 1000 rounds. Melted plastic that drips onto super hot stainless gas tube will cause ruptures.

[@Miohunter444]

Probably would have!!

[@GoldenWebb]

Probably would have but it would have been bad dangerous

[@Miohunter444]

@@GoldenWebb Thanks for all these meltdowns!!! Good info your giving us!!

[@GoldenWebb]

@@Miohunter444 I’m glad you like them brother, thank you!

[@bozo572]

I have this upper which made this video extra interesting (to me). I don't run full giggle but I'd say it did pretty well for a budget option (or any option) Thanks for the video and now I'm a new sub.

[@GoldenWebb]

It did do good for a budget upper! Thanks for the sub and support!

[@ozarkphoenix6615]

Finally a new video! Been waiting! Still waiting on a Ballistic Advantage Hanson Upper test! Lol

[@GoldenWebb]

We’re trying to get one!

[@Exl6243]

I'm curious to see if your tests would change if you swapped out the buffer system to an A5 or rifle length buffer system. The fire rate would decrease, which means we could see a potential stress decrease on the barrel and gas tube...

[@dudee145]

I’m glad you addressed the cookoff that went up in the air and the land behind the backstop. That was horrifying to watch without knowing before hand. You may want to mention that at the beginning of videos

[@GoldenWebb]

I probably should have but I didn’t want to give anything away before they watched the video

[@zanegardner6488]

..... horrifying? I mean it's in a safe direction and environment. You'd had to be a complete idiot to point a gun at someone no matter if it's loaded or not. That's why we watch these videos. So we see how they break....

[@desertpinoy5616]

Yeah, so there’s 2 purpose built uppers that’d be perfect for your meltdown and that’s gonna be an upper from small team supply of their AR-RPK or Red Right Hands Recce LMG with their heat mitigation system. Of course though if you want modified built uppers I would say get another HBAR 20” barrel with A2 front sight cuts on them and use Adam’s Arms Piston kit instead of a gas tube. Of course if it’s a gas tube you want I would switch it out with an Inconel gas tube. Of course though the only ar-15 upper variant that could withstand that kind of full auto fire would be Canada’s Colt LMG Rifle that was an open bolt machine gun from the get go that way you wouldn’t have those cook off’s. That’s why for closed bolt Ar-15 variants you’d want a special upper and or go with gas pistons so as to lesson the heat going into the reciever.

[@Beacon7x]

Appreciate these meltdown videos!

[@GoldenWebb]

I appreciate you brother!

[@richardpaige4960]

My first ever upper was a bca. Wishing I would have kept it now

[@GoldenWebb]

Hahaha it done alright!

[@JonnyBabyaka]

“Most guns can be an LMG if you want em to be” Hell yeah.

[@GoldenWebb]

Hahahaha

[@efrenrodriguez741]

Have you guys tried to get a 13.7 solgw upper?? Lol 😂I’m asking for too much already, last time I asked for the ADM 13.9 that you’re waiting for and you’ve already got videos with the other big names I wanted to see 👍🏼

[@GoldenWebb]

SOLGW will be sending us one to melt! Stay tuned!

[@efrenrodriguez741]

@@GoldenWebb Nice! What model upper are the sending???

[@GoldenWebb]

@@efrenrodriguez741 m4-89 13.7”

[@efrenrodriguez741]

@@GoldenWebb Thank you sir!

[@GoldenWebb]

@@efrenrodriguez741 thank you my man!

[@davidgrant3331]

Love these videos! Im waiting on a BCM meltdown or Centurion Arms who deserves some spotlight!

[@mrskippingguyonmush]

Im always envious of how much ammo these dudes go through.

[@GoldenWebb]

Hahaha sorry brother. We do blow through it

[@josepholiver6733]

Could yall do a PAS Ak meltdown I thank that would be cool

[@justinmullins5729]

Would like to see bcm heavy barrel next please

[@GoldenWebb]

We’re working on it

[@900Redshark]

I’d like to see a SpringField Saint Victor !

[@2A-J.MAY94]

Once again this is wild and once again if it wasn’t for. And oh yeah once again!

[@GoldenWebb]

Hahahaha we try to have a good time

[@Jrude22]

If it wasn’t a plastic handguard 100 percent it will go another 2-300 rounds. Good upper for $300

[@GoldenWebb]

Buddy I don’t think the plastic fire would have made that much of a difference

[@KingKatRider]

Lol, yea I remember lighting cigarettes off cherry red M60 barrels back in the day.

[@GoldenWebb]

That’s killer!

[@Mr.Sylky0]

Nice vid fren, god bless the AR platform

[@GoldenWebb]

Thank you brother

[@TMHonfire102]

You should take the hand guards off for the next video like this.

[@GoldenWebb]

We used to and everyone said the videos were to long

[@hansblitz7770]

Acceptable.

[@GoldenWebb]

I agree

[@RouteBGP]

You do realize the only thing that matters about this test is the thermal mass of the barrel from the throat to the FSB right? Pencil barrels will droop and kablooey. HBARS will usually run until the gas tube droops and blows. They both start keyholing somewhere around 400 with the heavier chromed barrels having a bit of an edge on that.

[@GoldenWebb]

But we also see which rifles hold up to the stress of this test as well

[@craines588]

Trying to to sound pushy, but any timeline for the pws? I have several, used them for years suppressed with zero parts breakage or any real issues even with not being cleaned. so I’m curious 😆. Thank you for everyone you guys do!

[@GoldenWebb]

Hey brother! We will do it as soon as PWS sends it to us. They acted like it would be ASAP and it’s took them longer than expected to get it to us. Supposedly they have the order placed, fingers crossed it gets to us before to long

[@LoneCrusader]

Still gonna recommend the old fashioned m4e1 by aero. Personally, atlas hand guard version but that’s me.

[@GoldenWebb]

We might be doing one soon!

[@pandazzy52]

Can we do an ADM upper next. They use a Criterion core barrel. Interested in how that barrels profile will handle. Thanks!

[@theREALdingusMD]

A PIG rifle saddle with tripod from HOG Saddle would be a good investment.

[@GoldenWebb]

Good idea

[@grantstephens5897]

I've gotta be honest. It did better than I thought it would. For the price point, I'd say they're a pretty decent deal. Great video

[@GoldenWebb]

It done a lot better than I was expecting to be honest.

[@Boy_sumi]

Bro, appreciate the meltdowns. Be safe out there.

[@4g63mark]

I couldn't help but notice none of your previous meltdowns were with rifle length gassed barrels like this one. Is this buffer weight optimized for a rifle length gassed barrel? If not the double feeds are no surprise.

[@GoldenWebb]

We have done a 20 inch M16A4 from Aero precision and it done fine. We tuned everything before the video started as well. Barrel gas port eroded very quickly is what caused the failures

[@4g63mark]

@@GoldenWebb Oh ok. So you bought the upper with the parkerized barrel rather than the nitrided barrel.... Yeah those parkerized barrels have no nitriding, no chrome lining, no nothing to protect the bore from accelerated wear and tear.

[@GoldenWebb]

@@4g63mark that’s the one they sent

[@4g63mark]

@@GoldenWebb Yeah when you order an upper from them you can buy an upper with a nitrided barrel, or an upper with a parkerized barrel. I made sure to get both of my uppers from them with a nitrided barrel

[@GoldenWebb]

@4g63mark I understand that. I’m not sure why they sent me this one then

[@glocksp80smd]

Can find the link with the uppe. I wannt more info on it. Like was it chrome lined and all that. Chrome lined barrels are for full auto fire alot of meltdown videos arent chrome lined barrels so want to know if this heavy barrel is

[@Jrh-rp7np]

Man it seems like those polymer M16 or M4 style hand guards,, are a problem they catch fire quickly and they hold all that heat in., unlike an M-Lok hand guard where u get all that air flow around the whole barrel..

[@forkthepork]

That was 625 full auto rounds. You're not likely to see that in the real world...

[@GoldenWebb]

They do get hot and start to catch fire pretty quick, but once again this is Full Auto Fire

[@LordOfThisWorld74]

Hey a new awesome gun channel, awesome stuff! Greetings from KY!

[@GoldenWebb]

Nice! Fellow Kentuckian myself, what part?

[@kksan]

question, what determins the round per minute? This m16 upper seems to shoot a lot faster than the aero m16 upper. They had the same lower right?

[@j8nkies20]

Ayeeeeeee.... Happy year of the Dragon to you and the rest of the crew over there. Wish you guys much health, wealth, and success for this year and beyond. Thanks for the video, mate. Couldn't click on it fast enough.

[@GoldenWebb]

Hahaha thank you brother! I sure do appreciate the kind words!

[@2nd_a_dad4791]

Boogalations 5:56: “Blessed are they, who in the name of science and fun, risk life and limb to find the burn down limits of budget firearms.”

[@GoldenWebb]

That be the truth!

[@jk240sx]

With thise double feeds and failure to ejects, the rounds were going off with your finger off the trigger, so when the bolt was going forward it was striking the primer. Would the fire in the receuver cause the round to fire?

[@GoldenWebb]

I believe we did have a few strike out of battery for sure. Scary to be honest. The heat from the barrel would but the fire itself wouldn’t

[@markhall6715]

Just out of curiosity, what weight buffer are y’all running in that lower???

[@GoldenWebb]

H2

[@Wmbhill]

Thanks for the video

[@GoldenWebb]

Thank you for viewing my friend

[@bdubbs]

The fact this thing cycled after the gas started coming out of the front of the receiver is shocking to me. The ejection pattern at the end was like 1-2 o clock.

[@ozarkphoenix6615]

Lol you're usually smooth with this, this time this upper gave you a little sloppy fun! lolol But, I'm impressed with the upper! I am sure it would've went for longer!

[@GoldenWebb]

Hahaha it about had me whooped. It’s heavy as lead and wasn’t fun trying to clear malfunctions and it on fire

[@ozarkphoenix6615]

@@GoldenWebb lolol 😂🤣

[@GoldenWebb]

@@ozarkphoenix6615 we tried our best to fight it though!

[@redomore3045]

Will love to see the LMT ESTONIAN

[@GoldenWebb]

That would be nice!

[@kevinpavlich4136]

Can you add a Caracal 816 to your testing regimen?

[@brianpetty7852]

What are you saying right before you fire? I have watched almost all of the meltdown videos and cant figure it out lol. Also hoping to see you meltdown a Gen4 POF P415.

[@GoldenWebb]

Here’s to ye dog! Old video of OH Napier. And we’ve got one and fixin to melt it

[@brianpetty7852]

@@GoldenWebb hell yeah. Thanks for the reply. It means a lot. Looking forward to the video.

[@GoldenWebb]

@@brianpetty7852 i appreciate that brother. Thank you for your support

[@kenshin034]

One thing quality heatshielded guards are 👑 especially for SBR can’t even stress magpul guards enough on AKs can’t shoot what ya can’t hold Val Kilmer 🔥👋😂

[@skywalker9110]

Nice test but too dangerous on this type of malfunction. Failure to eject and hot chamber. Wait to another upper meltdown. You have plans in future tests like sand or mud or drop? Very interesting basic bolt carrier or enhanced(like lmt or kac)more reliable in adverse condition. P.S. always stay Safe.

[@GoldenWebb]

Yea it got bad dangerous quickly! We haven’t thought about doing something like that yet but we will consider it!

[@johngg25]

Another good one GWebb !!

[@onxy4549]

You should do the Lwrc IC DI next

[@GoldenWebb]

Still waiting for lwrc to send it to us

[@scubasteve743]

Have you guys done one of the psa fn barreled uppers yet?

[@GoldenWebb]

Not yet

[@perfectsoulmates2023]

Can someone educate me please as to how one gets to own an “automatic” rifle? Just asking because I thought the “law” says only semi auto, so yes, I’m a newbie when it comes to how to get a fully automatic machine gun in the US. Thanks in advance.

[@GoldenWebb]

You have to buy a transferable, which is about 40K, or own a class 3 FFL

[@anthonycombs1623]

Chrome lined barrel will work better on full-auto gun in these tests,aluminum forearm won't catch fire.

[@GoldenWebb]

That’s true!

[@aplaceholderbplaceholder9524]

Take off the handguard next time. Get rid off the fire distraction.

[@professorhunter84]

I know you guys usually do nicer uppers but do you think you could do a PSA upper?

[@GoldenWebb]

We might try to do one! Trying to cover uppers that haven’t been done yet

[@f.e.oeeorch581]

I understand that BLACKOUT DEFENSE is more suited to be a more high end rifle with its intended purpose not being full auto do you think it will even be possible to get on the channel

[@GoldenWebb]

They told me about 6 months ago they’d send us one. I haven’t heard anything back in awhile so it’s currently unknown

[@f.e.oeeorch581]

@@GoldenWebb their lead times are extremely long but dang do they know how to make a upper and trigger

[@boomerisadog3899]

I'd like to see an autopsy video of the uppers after you melt them down

[@jaredcoleman3002]

Can you do the cbc industries 5.56 16 in upper receiver next.

[@GoldenWebb]

Never heard of them, I’ll look into them though

[@Usmc0341]

Wow, honestly i didn’t expect it to go over 350

[@GoldenWebb]

Me either tbh

[@Canes-kh5bq]

Wonder what lwrci heavy barrel will do

[@GoldenWebb]

Untelling, hopefully good!

[@Canes-kh5bq]

@@GoldenWebb awesome love your content brother.

[@unauthorizedentry01]

625 for an HBAR is pretty shit. That barely beats the KAC’s LW barrel.

[@GoldenWebb]

That’s true, this one had the gas port erode way to so n

[@nikedgerated]

Colt 6940P piston with the socom barrel

[@GoldenWebb]

I don’t think they ever made a 6940P with a SOCOM barrel

[@nikedgerated]

@@GoldenWebb the piston had only socom profile barrel with m203 undercut, the 6940 had standard profile

[@andrewpinheiro7202]

I’d like to see how the mk 18 upper from brownells does.

[@CountryChamp1]

The ATF must hate you :) love the vid bro

[@GoldenWebb]

Hahaha thank you brother!

[@ryanyoung4234]

I’d like to see a pws upper

[@Keithrrr]

Went slightly longer than than the Aero Precision A4 upper. BCA is also less expensive