[Beginner] Bind & Setup the Mobula 6 2024 ELRS the first time!

[@iFLYXWings6589]

Need to flash your Radio ELRS firmware? Check this！ kzbin.info/www/bejne/a5i4nWlorLCtna8

[@JN-qr4yt]

Thank you for this video, subscribed and thumbs up

[@matt.explore]

Great video, helped me out, thanks.

[@moonraker814]

Thank you!

[@iFLYXWings6589]

You're welcome!

[@shogunemperor]

Niiice! Awesome video!

[@iFLYXWings6589]

Thanks shogun !

[@ВЛАД..ЯНОВ]

👍👍👍👍👍👍

[@chorchecze]

instead of useless horizon, put Airmode on switch - switch up = angle, switch middle (default position) = acro + airmode, switch down, = acro only

[@user-hi5quadxplorer]

I asked this guy to explain why he tells everyone its so easy to bind but yet doesn't tell you the bs your going to go through to flash your binding phrase on your radio. Please make a video of building a binding phrase on the RM Pocket ELRS VERSION

[@iFLYXWings6589]

Look into the description. It is right there. Just want to setup a bind phrase to your radio? Check this! kzbin.info/www/bejne/gJrcZmSNj9mCqLs

[@leeconj2093]

Thanks for the vid really helped. I have one question if you can help. I'm tring to update ELRS on it, do you know which target to select on the ELRS Configurator?

[@iFLYXWings6589]

If you are referring to the mob 6 - 2024 : Generic ESP32 RX

[@leeconj2093]

@@iFLYXWings6589 Yeah, mob6 2024. I figured it out in the end. The target for elrs 3.4.3 is HappyModel AIO 2.4GHz RX+VTX

[@ПавелКрасавчик-т7м]

Hello, I'm new and I also want to get Mobula 6 ELRS Please tell me if you know which remote control the Mobula 6 ELRS will work with (for example, does it work with the RADiOMASTER TX16S Mk2 Max?) What glasses are needed? I don’t understand anything at all, there’s so much incomprehensible information...

[@iFLYXWings6589]

Well, it depends of the TX RX protocols, if you are getting the ELRS version, mostly any radio with ELRS should work

[@brandon9689]

Those Radiomaster pockets seem like sweet Radios for the money. I was going to buy a Mob 6 and try to bind it to my EMAX elrs radio, but I'm not sure if it will even bind. I think a RM pocket would be a good replacement for my cheap EMAX elrs.

[@iFLYXWings6589]

The pocket is indeed pretty good, for the money it is hard to beat the quality.

[@user-hi5quadxplorer]

So if I have a RM Pocket ELRS do I have to download it to my lua script even if I did everything you did and I saw its successful.

[@iFLYXWings6589]

If your RM pocket is already ELRS, no need to downlaod Lua script again

[@MichaelRogersJesusrules]

i updated the firmware as couldnt get the video to connect to the goggles hdz now there is nothing in betaflight video transmitter for mobula6 2024 ECO just a blank page and i wouldnt have a clue what to do .any help would be much appreceated. oh it did have the page like your video @ 5:25 but the VTX table wasnt as populated i only had.. letter F with about 3 numbers and letter and R (1-8). i do have a dump file but wouldnt know what to dump into the new list . :)

[@iFLYXWings6589]

What model do you have ? HDZ or Analog?

[@MichaelRogersJesusrules]

@iFLYXWings6589 hdz ! I'm sorry my tv use to notify me but now it's just on my phone and I only just found like 30 people trying to talk to me about lots of different things ..it's mobula6 eco hdzero 2024 keeps wiping clu but it's worked once untill the batt got low or sory this is long ok I plug it into betaflight most the time now everything works when I unplug it a motor or 2 don't work .I have bluej at 96k ..I'll have to relook but yeah I'll wait for you to respond as I might have quite a few others asking me so I'll get on pc ..umm I have asked there customer support lol. They said bad cli or something re ndownload everything dump it I don't know which files lol OK chat soon maybe much appreciated for the response .xo

[@Levytan1]

Is there a bind button and is yes can i bind it with the radio that comes with the sub250 whoopfly16 combo rtf. It has a binding button on it but no screen?

[@iFLYXWings6589]

Not this one, this one you will need to follow my instruction for binding

[@michaelo9071]

How do I find the bund phase on the transmitter? You didnt go over that part.

[@iFLYXWings6589]

There is not default binding phrase, you will need to set them up yourself, here is a tutorial kzbin.info/www/bejne/gJrcZmSNj9mCqLs

[@billywells]

What can you do if your drone binds but no stick inputs happen?

[@iFLYXWings6589]

Check 1. packet rate - set it to 500 hz 2. Turn on and off model match to try

[@billywells]

Thank you I’ll try that.

[@puc19]

How do you check model match

[@soggydeafguy7571]

To anyone in the future. Check the user manual for the “ports” section in betaflight. I set them up incorrectly the first time and I couldn’t use the controller or the the vtx until I reconfigured the ports

[@josetorres6127]

Can you do the plug in and unplug battery 3 times to make it enter binding mode?

[@iFLYXWings6589]

I haven’t tried it but by theory yes

[@Justinmatute92]

so how do you put the binding phrase on the mobula 6

[@iFLYXWings6589]

Check 1:33 Setup a Binding Phrase. If you are referring to prior edition Mob 6 that has a SPI RX, you will need to set it up in betaflight This is going to be a short guide kzbin.infoAOlf_eMIA0Q

[@nyclassic4ever130]

I've never set up a bind phrase nor do I want to. I thought I would be able to bind via BF like on any SPI rx. I don't see the option. Tried the 3 plug method...nothing. 🤔

[@iFLYXWings6589]

This one has serial based ELRS not SPI, your best bet is still to use the bind phrase if the plug unplug does not work …sorry

[@FPVsniper]

Thanks, but do you know why mobula is not generating wifi when connected ?

[@iFLYXWings6589]

Sometimes this happens, normally I will power on off to retry. If it still doesn’t work you might need to flash it via BF passthrough

[@FirmanShulthony]

Can you give us the website, where you bought this drone?

[@iFLYXWings6589]

The best bet is to buy this off AliExpress as most of the US sites are OOS

[@gkonrad20]

what to do if after 30s the mobula 6 still does not share wifi connection?

[@iFLYXWings6589]

I would say try a few times, power cycle your WiFi by turning it on and off

[@gkonrad20]

@@iFLYXWings6589 is it way to enable hotspot/wifi mode by cli in betaflight?

[@gkonrad20]

@@iFLYXWings6589 is it way to enter hotspot/wifi connection by cli in betaflight?

[@jay999tv]

Do you like the karate preset?

[@iFLYXWings6589]

Never tried it before, but will give it a go

[@SKI_FPV]

Wait is the motor connector soldered?

[@iFLYXWings6589]

Yes this is one of the big thing they changed on the new mob6

[@SKI_FPV]

@@iFLYXWings6589 how fast it is?

[@TJ-ki3gp]

Useless video. Everybody shows how to setup binding phrase on the drone, nobody shows how to set it up on the radio. Same here. you just glanced over the fact "since my radio has a binding phrase in it"

[@iFLYXWings6589]

I am going to give you a chance to read the description of the video and see if you still want to consider this as useless.😂😂😂

[@TJ-ki3gp]

@@iFLYXWings6589 My bad!! I actually used that video and finally gotten it to work :) Big thumbs up! This process has been frustrating so far... Got any videos for Walksnail VTX binding? That's my next challenge, connecting to Goggles L.