A lot of comments and messages later.. here it is. Hopefully this video will shed some light onto what is best to start out when you want to stunt your Honda Grom. Let me know your thoughts in the comments below
Пікірлер: 155
@GromGarage5 жыл бұрын
What other types of videos would you like to see?
@2wheeldom115 жыл бұрын
Wheelies!
@aeror1155 жыл бұрын
Grom Garage wheelie/rear brake control for dummies 😂🙌
@finnbradbury94234 жыл бұрын
cheap stunt bike build
@donnydarko17854 жыл бұрын
Is a clutch plate needed? I heard the stock plate is prone to breaking.
@GromGarage4 жыл бұрын
Yes! The stock one is very prone to breaking
@Photogromer4 жыл бұрын
I think I'm ready to try my first wheelie. Thanks Kyle.
@GromGarage4 жыл бұрын
Thanks man... I tried 🤷🏻♂️
@KyOnCOD4 жыл бұрын
@@GromGarage damn you do look like a Kyle... and that's coming from a Kyle
@aeror1155 жыл бұрын
All i need is the left hand brake and the ultimative wheelie skill😄! Thanks for this video bro
@jeremypierce19795 жыл бұрын
Good job bro!! Thanks for the info!! 👏🏻👏🏻😁👊🏻👍🏻
@joereed73263 жыл бұрын
I like the spring swap🍀💪
@cubul324 жыл бұрын
As a beginner I found this valuable - and it makes sense. Subbed! Nice vid.
@GromGarage4 жыл бұрын
Thank you for the awesome response! Appreciate the support!!!
@Rob-of1cv2 жыл бұрын
Just bought 2022 grom, thanks for the advise for the beginner.
@GromGarage2 жыл бұрын
Enjoy it!
@ivlimp13663 жыл бұрын
Love your vids buying a grom soon... Soo will need them. Just subscribed 💙
@GromGarage3 жыл бұрын
Enjoy it!nn
@alastair3555 жыл бұрын
Cool video mate, will definitely help new guys out
@GromGarage5 жыл бұрын
Thanks man!
@motosporttouring4 жыл бұрын
Thank you. Lots of good info.
@GromGarage4 жыл бұрын
Awesome! Glad I could help!
@shadystuntsofficial5 жыл бұрын
Sooo agree on the 12 bar. It’s the gift that keeps on giving. 🤘
@Waajon4 жыл бұрын
Dopest fucking Grom I've ever seen in my entire life.
@GromGarage4 жыл бұрын
Ok. So... my head just exploded from my ego! Thanks man, really appreciate it 😇
@2wheeldom115 жыл бұрын
Good advice, I would recommend also gearing, down one tooth on front sprocket and maybe up 3 in rear is a great combo. Also down the line some engine mods like tbolt cam, finbro ecu and 150cc injector. I need another $1200 and my grom will be all setup lol
@GromGarage5 жыл бұрын
T bolt cam coming soon lol, and yea one tooth down I would recommend
@TerribleStunts5 жыл бұрын
I run -1 +2. even +1 in the rear is ok.
@nightmarestunts3 жыл бұрын
2WheelDom 13 front 37 rear stock chain. Decent up to 50 in town
@andreekyllerstrom87822 жыл бұрын
Great video! just bought a Grom and gonna order stunt parts right now. Question tho! do i not need the crash cage / engin guard? is it enough with subcage + axle sliders?
@baddaystunts2 жыл бұрын
Just a suggestion if you don't want to buy bar end sliders and you want protapers I run pro taper drz 110 they are very wide but your move your grips in a bit and you're not super wide armed. I am 6 foot 1 inch so they're comfy for me but my left hand grip has 1inch of bar on the outside
@WinnerTowing3 жыл бұрын
good video do you have a part number for the clutch springs by chance??
@jiggawuhhjiggawho2 жыл бұрын
So Must-Have: ZabFab (or Get Bent) Subcage, Z&Z Custom Axel Sliders, Bar-end Sliders, ProTaper KLX 110 Handlebar. Sort of Must Have: Rear pickup oil pump OPTIONAL: 3 Hayabusa Clutch Springs. One-finger pull clutch. Stainless steel brake lines EVENTUALLY: Handbrake Thank you!
@victorsmikh62643 жыл бұрын
Can you do a video with links of where to buy all these parts?
@fordmustanggen52 жыл бұрын
2:52 ahhh yessss, don't forget to stroke that shaft kids
@GromGarage2 жыл бұрын
Best way to clean off those grips 😉
@1viiyy2 жыл бұрын
If the z and grom where stock the z is better for wheelies u think?
@ip49523 жыл бұрын
Hey I know this it’s kind of an old video but I was wondering if those Z N Z sliders work on a 2014 grom as well?
@UnknownUnknown-hd9zj4 жыл бұрын
Dam that grom is slammed out
@nickysstuntzest4 жыл бұрын
Whats your sprocket setup?
@nickr29573 жыл бұрын
you forgot 14T front sprocket. I use 13T but I heard that 14T is minimum for the right wearing geometry (something like that)
@javierserrano9593 жыл бұрын
What model is your tail light?
@jonnyb57522 жыл бұрын
I have a 2019 the only think I did is my engine is the springs 80% and that’s it I’m not doing nothing else what’s a good oil pump oem/takagawa/kitaco I don’t no which one to get
@Stevo1301Ай бұрын
Bro what brand exhaust is that?
@tylerbolich28733 жыл бұрын
I wanted to know if you did anything with gearing when you had your Z125 for stunts. I went down one to a 13 tooth front sprocket and was wondering if doing the rear would make a bigger difference?
@GromGarage3 жыл бұрын
Mine was completely stock on the z125. On the grom I’m down one in the front. (The bikes are setup differently)
@TerribleStunts5 жыл бұрын
Z&z Custom Subcage is legit. I run his.
@GromGarage5 жыл бұрын
Haven’t tried that, but I really appreciate the suggestion/comment!
@TerribleStunts5 жыл бұрын
@@GromGarage well next time I'm up in your neck of the woods you can try it.
@cubul324 жыл бұрын
This one? www.zzcustomdesigns.com/store/p68/Grom_Cage_%26_subcage_with_footrest_and_bar.html . Is there a muffler/engine underbelly cage/protector (not the carbon/fiberglass thing) ??
@Yonex3333 жыл бұрын
I've mastered wheelie in bicycle, i don't loop anymore on bicycle, the problem is I'm used to use hand brake and not footbrake, which one you think it's easier? Any advice you can get me to start trying wheelie my grom? Can you tell which sliders are you using? Thanks!
@GromGarage3 жыл бұрын
I go over all the parts on my bike in the second to last video I just posted. Also, using your hands is easier than your feet. The handbrake is definitely easier to learn than footbrake but if you understand the basics you will learn faster
@bluntsi73953 жыл бұрын
Hey Grom Garage what bar ends did you use to fit the pro tapers I’ve been looking
@GromGarage3 жыл бұрын
Womtech or something like that. Tst industries sells them, you might have to drill out your bars a little bit
@StiliyanStoichev5 жыл бұрын
Hey i want to ask you that . I know the grom is air cooled right ? Is there oil cooling system or no ? Is there overheating problems if you stunt it only ?
@GromGarage5 жыл бұрын
It is just air cooled. Some people add an oil cooler with the kitaco side cover, but it's expensive. Just get a temp gauge and let it cool down from time to time
@StiliyanStoichev5 жыл бұрын
Have you ever got problems with the heat ? In my country at summer is like 30° - 45 °C
@GromGarage5 жыл бұрын
You should be completely fine. The only times it ever gets hot it highway riding and when you are sitting stationary for a really long time
@StiliyanStoichev5 жыл бұрын
@@GromGarage i am looking it to use it to only stunt it so it means slow speed at same place. If i put manuel fan infront of the cylinder will this help a bit what do you think ?
@masonerwin29393 жыл бұрын
ol pump
@ryanlake76035 жыл бұрын
What do think about changing the front sprocket? Help a lot and worth the money or no?
@GromGarage5 жыл бұрын
Front Sprocket would definitely help. Worth the money. Just go one down
@kevzrevz4473 жыл бұрын
how is that number plate legal? :P
@driftslutt21665 жыл бұрын
Fuck the pro taper bars dropped my bike first time from shifting into 3rd on accident bent to shit 😂
@GromGarage5 жыл бұрын
Dang... well I haven’t had a problem personally but I still think protapers are better than stock bars
@driftslutt21665 жыл бұрын
Grom Garage hopefully they bend back next fall 😂
@kevingarrett62803 жыл бұрын
You license plate looks like NC. I’m located in NC as well. Where are you located?
@GromGarage3 жыл бұрын
Fayetteville lol
@seaneff285 жыл бұрын
Does the oil pump only works when in wheelie or even when just riding?
@GromGarage5 жыл бұрын
Well the motor and head always needs oil... So yes it does. Just gotta make sure you have enough in there.
@Grainsauce4 жыл бұрын
How much was that bike lift? Probably at least 1k? Where did you get the oil pump?
@GromGarage4 жыл бұрын
Bike lift is from harbor freight, $200 and I added a wheel chock from harbor freight that was about $50. So I’ve got about $250 in it
@cesarcisca50532 жыл бұрын
Awesome vid but would of been nice if you linked everything you just mentioned. JS.
@GromGarage2 жыл бұрын
I have another video showing my full build with links
@lukelevey5602 Жыл бұрын
What model of bike are the clutch springs from?
@GromGarage Жыл бұрын
It is Busa Springs, I have a different video with the exact part number
@jacobmanke69375 жыл бұрын
Do you just screw the bar end sliders into the bar or is there some sort of mounting bracket?
@GromGarage5 жыл бұрын
Expandable insert. Might have to drill out the end of your bars to fit the insert. Not hard at all
@jacobmanke69375 жыл бұрын
@@GromGarage Awesome Thanks!
@motomaverick33103 жыл бұрын
Hey man where did u get the clutch springs from
@GromGarage3 жыл бұрын
From my local dealer - Baker Motorsports in Fayetteville, NC
@Rezvx4 жыл бұрын
can someone shoot me a link to the oil pump for a 2020 grom, budget of 100-150...
So does the sub cage protect the plastics and the engine?
@GromGarage2 жыл бұрын
Not really
@chancewallace22585 жыл бұрын
What about a front crash cage?
@GromGarage5 жыл бұрын
It's not totally needed. If you have a good subcage and solid bars, your side plastics should never hit. Plus it's just extra weight
@corytruman60764 жыл бұрын
No mention of sprocket swap?
@GromGarage4 жыл бұрын
Yea... everyone let me know in the comments. I definitely recommend it. Down one in the front
@brianurquhart27545 жыл бұрын
What axle sliders do you have ?
@GromGarage5 жыл бұрын
They are zz customs sliders, if you are interested in any parts on my bike just check out my channel. I got videos for almost everything
@aka_virtus_pro35483 жыл бұрын
What kind of fender eliminator do you have?
@GromGarage3 жыл бұрын
TST bracket
@Quinnjamin20205 жыл бұрын
what pegs/rear sets are those?
@GromGarage5 жыл бұрын
Zz customs pegs and axle sliders
@myovertime59915 жыл бұрын
Are sprockets not a huge deal?
@maughmoto88745 жыл бұрын
My Overtime you can wheelie with them, it just makes it easier the more you gear down.
@GromGarage5 жыл бұрын
Yea, one down would help a lot but I tried to go over what would really help you get started at first
@BignutsDj5 жыл бұрын
What bar end sliders are those?
@GromGarage5 жыл бұрын
TST industries
@BignutsDj5 жыл бұрын
Thanks @Grom Garage
@mrglitch57183 жыл бұрын
Where do I buy the zab fab wheelie bar?
@GromGarage3 жыл бұрын
I don't believe it is being made anymore. But there are a million other companies that make Grom subcages
@Willcome972 жыл бұрын
just found your video anyway to link all your mods?
@GromGarage2 жыл бұрын
There is another video on my channel that covers all my mods
@protectork98314 жыл бұрын
how to protect inside of the bike. buy z125. it uses same oil filter as my xr400r. grom has no oil filter
@bexxwalter40893 жыл бұрын
What about a bigger sprocket?
@GromGarage3 жыл бұрын
I personally kept my rear sprocket stock size
@xXSnipsBossXx2 ай бұрын
Jokes on u I never looped cuz sm totaled my grom at 1300 miles 😭💀
@dredrrdredrr69813 жыл бұрын
youtube getting to cool wit thes ads
@alldaysleeper78662 жыл бұрын
You should have put the links to the mods so that we could just buy them off the links
@MartinTapperMedia4 жыл бұрын
why did you jerk your bar handle?
@GromGarage4 жыл бұрын
It was meant to be funny .....
@Certifiedeye3653 жыл бұрын
hook us up with some parts links my man
@GromGarage3 жыл бұрын
I know it's a fairly new technology, but there is this machine called Google that you type in what you're looking for and it gives you links to possible websites that sell said products 😉 I already did most the work by making the video and telling you about said products, now it's your turn to do some work 😘
@JavierGonzalez-go6ss4 жыл бұрын
Link to protection please
@GromGarage4 жыл бұрын
Don't think ZabFab is making changes anymore.
@brianurquhart27545 жыл бұрын
Link for oil pump
@GromGarage5 жыл бұрын
You will have the search it on facebook, they have a info page on their facebook on how to order a pump 👌🏻
@brianurquhart27545 жыл бұрын
Thanks I already Figured it out
@andrewhulliberger17502 жыл бұрын
Ole pump
@jokowilliams57514 жыл бұрын
Parts list?
@GromGarage4 жыл бұрын
Check out the newest video posted 🤙
@botweather89st3 жыл бұрын
Hard hard stunting 🙄
@roadjokers64674 жыл бұрын
Were did you get them pegs man
@GromGarage4 жыл бұрын
They are zz customs pegs and axle sliders. There’s a video on my channel talking about it
@dailynonsense58564 жыл бұрын
Where you get you’re axle sliders
@GromGarage4 жыл бұрын
They are zz customs axle sliders
@goat16814 жыл бұрын
I live in germany nearly everythink is illegal in germany 😂
@GromGarage4 жыл бұрын
Definitely don't miss living there 😅. Best 2 years of my life though!
@goat16814 жыл бұрын
@@GromGarage i want to make holiday in the usa but not this year 😂
@charlieellis87773 жыл бұрын
@@goat1681 lol good call bro wait till this COVID shit wears out
@HellYeahBrother894 жыл бұрын
Why did he just randomly start stroking his bike
@GromGarage4 жыл бұрын
I was trying to turn it on
@Rick_Sanchez_C137_4 жыл бұрын
HarleyDEEZ Rides There is a sexual component to the affair between many riders and their rides... if you don’t feel this way about your motorcycle, than you might as well sell it... it is like the chemistry in a real relationship, no desire for your bike is the same as no chemistry with the woman you ride... “Jesus built my hotrod. It’s a love affair, mainly Jesus, and my car.” -Ministry
@protectork98314 жыл бұрын
yea i am not putting in 10k in parts on 2k bike.
@GromGarage4 жыл бұрын
Definitely don't have 10 grand in parts in my bike, but ok.....