Beginners Guide to the G1000 Autopilot with Instrument Approaches

[@kahlilhall4418]

Dude simplified it all for me lol just started ground school thanks

[@trent_dyrsmid]

@@kahlilhall4418 glad to hear that it was helpful. Thanks for watching!

[@antoniog9814]

Please keep these videos coming! Had it not been for that rogue airliner rushing to take off during your approach on short final, you would've maintained center line.

[@trent_dyrsmid]

🤣🤣🤣

[@diasbuilds]

You explain things so well! Thank you for these video series. It's helping me transition from steam gauges to EFIS in my muti-engine IR training.

[@trent_dyrsmid]

Glad to help!

[@safa4786]

Great vid-thankyou. Came from analogue to Garmin 750 displays-this helps a great deal.

[@trent_dyrsmid]

@@safa4786 🙌 Did you see I also have a discord channel? Link is in the description. Hope to see you in the Discord community!

[@Tricker907]

Nice video! Thanks! Really needed something like this for the instrument side of things

[@trent_dyrsmid]

Glad it was helpful!

[@2DNoodles]

was really struggling to understand setting up ils approachs esepacily how to setup and capture glide slopes. this video was a HUGE help.

[@trent_dyrsmid]

@@2DNoodles 🙌 Did you see I also have a discord channel? Link is in the description. Hope to see you in the Discord community!

[@jakew9887]

Great presentation. Thanks

[@trent_dyrsmid]

You’re welcome! Thank you so much for watching and leaving a comment. It all helps my channel to grow and help more guys/gals like us!!

[@peterorre5343]

Excellent video, many thanks for the concise and competent commentary and instruction, very helpful and motivating !! 😊

[@trent_dyrsmid]

Glad it was helpful!

[@jonasc1221]

Obrigado Trent! Very useful.

[@trent_dyrsmid]

Good to hear!

[@therustypilot3452]

great video idea. You will do well with this one over time.

[@trent_dyrsmid]

I hope so!

[@NotthesingerChrisMartin]

Great video!

[@trent_dyrsmid]

Glad you enjoyed it

[@AhmedWasef]

Nice one thank

[@trent_dyrsmid]

You are welcome

[@binghanem25]

great video, thanks a lot !

[@trent_dyrsmid]

You are welcome!

[@ilyaredkin4172]

On 08:00 you're saying you're flying to the station on 127 radial, I think that's more correct to say you're flying on 307 radial inbound.

[@alexkapinga2024]

I've heared someone say "Radial" (for towards the beacon) and "course" (flying outwards from the beacon)

[@ilyaredkin4172]

@@alexkapinga2024 as far as I remember from my IFR training, radial is always a radial, and you can follow the radial either inbound or outbound. "Course" is not applicable to VOR navigation. I might be wrong though, I've never actually navigated with the ground stations, all my flights are GPS now.

[@dismaldunc]

thanks for that it was really useful. especially how the g1000 will transition from heading mode to approach mode when it can, I have been getting into all kinds of bother switching between them.

[@trent_dyrsmid]

Glad it was helpful!

[@hassu122]

You didn't explain where to you get radio frequencies for VOR?

[@trent_dyrsmid]

@@hassu122 from the sectional chart or from ForeFlight.

[@nicholashurl3030]

Great Vid. Please slow down a bit for those of us who haven't done this before. Thx

[@trent_dyrsmid]

You can actually slow down the playback speed on KZbin. Just click on the gear icon in the upper right of the video.

[@nicholashurl3030]

@@trent_dyrsmid yes I know, but it doesn’t do anything for your voice. Makes you sound like Luther Vandross if you go too far! 😜

[@trent_dyrsmid]

🤣🤣🤣

[@Blash1]

How do you get the in game Jeppesen chart?

[@trent_dyrsmid]

I don’t recall. It was either from my Navigraph subscription or it was already included.

[@imatruckdotcom]

Thank you for the video. I am closing in on IR check ride and this helped clear up some of my struggles with the g1000.

[@trent_dyrsmid]

Glad it helped!

[@Pete_Bennett-BWP]

Useful but would be better if you had set up scenarios beforehand rather than literally doing it on the fly, ILS 28R good case in point. Any chance of rerecording this?

[@trent_dyrsmid]

@@Pete_Bennett-BWP No.

[@garysherwood3136]

Great video. What plane were you flying in x-plane?

[@trent_dyrsmid]

I don’t use X-plane. I was using Microsoft flight simulator and flying a 172

[@garysherwood3136]

I have that also. I just built a G1000 and am using x-plane. I’ll check out MSN’s. Thanks for the reply.

[@trent_dyrsmid]

🙌

[@JeremyMyersmusic]

Does the Auto pilot fly the step down fixes or do you have to tell it to drop each fix?

[@trent_dyrsmid]

If you use VNV, the auto pilot will fly the step down fixes. I forgot to include that in this video, and will record it in a separate video soon.

[@dismaldunc]

oh, I was all sad when I realised my msfs didnt have the charts, is that the navigraph add-on?

[@trent_dyrsmid]

No. Those charts are natively part of MSFS.

[@dismaldunc]

@@trent_dyrsmid hmmm, wonder where im going wrong, I have the 40th aniversary steam edition, in all the g1000 planes, the charts button is greyed out.

[@trent_dyrsmid]

IDK, sorry!

[@kstarrmd]

What settings fix the menu that comes up when I click on the buttons? When I engage a knob on the G1000 a white menus pops up basically obscuring the entire area.

[@trent_dyrsmid]

Without seeing exactly what you’re talking about, I’m not sure.

[@thomasmullee3049]

there's an option in the settings "disable tooltips"... maybe that helps

[@trent_dyrsmid]

Sry no it didn’t.

[@thomasmullee3049]

@@trent_dyrsmid in the flight simulator 2020, go to settings, general, accessibility, then disable " show tool tips "

[@trent_dyrsmid]

🙌

[@theodoregrader8270]

rockstar

[@trent_dyrsmid]

Thx

[@albertyowell5455]

You jumped around way too much. Didn’t plan a realistic ground track to demonstrate the system.

[@trent_dyrsmid]

✈️

[@masonbowring9068]

@@trent_dyrsmid “✈️ “ 😭😭😭😭

[@trent_dyrsmid]

✈️✈️

[@TonyDyrsmid]

Thank you, this was very informative for me and I wish I had it in the olden days.

[@trent_dyrsmid]

Yea….the tech is pretty amazing these days!

[@alanmangroo3656]

Great video!

[@trent_dyrsmid]

Glad you enjoyed it. Thank you so much for watching and leaving a comment. It all helps my channel to grow and help more guys/gals like us!!