Behringer Xenyx 1622usb Mixer (1)

[@creative12361]

nice one bro i have uesd the 3.5mm jack to phono and the sounds coming from the mixer is now eq thanks for helping me to set up the mixer.bless

[@creative12361]

hi there i just got this mixer and im glad you are showing how to use it i am useing this mixer with my laptop im coming out of my laptop with a creative sound blaster card.i am coming out of the phono out put with phono to jack left and right could you tell me where i can put the jack left and right in the mixer thanks simon.

[@crestlineaudio]

hi! great videos. I am trying to set up my AT-4040 to record voiceovers, going into channel 1, then the signal goes into my adobe audition. first of all, my monitors only take XLR, so they are on the main mix output. so I have to turn those off while recording vocals. because I have the mic channel at 0db and solo and main pushed in, I have the main mix at 0db as well. and I can record, but my voiceover buddy says my vocals sound "thin". how should I set up my mic channel (line in,low cut, gain, compression, eq)? thanks. I'm really dumb with this stuff. Oh and should I have my mic going into a processor/compressor before it goes into the mixer? thanks again Elias

[@hadleymanmusic]

I just got an x2222 its more features than ive graduated to yet.

[@MrGuitarRadio]

This video isn't that long, so I guess you may have somewhat rushed through it. The mono channels don't have "low mid" EQ. It's High, Mid and Low and the Mid filter frequency sweep control. You can change the frequency of the Mid filter to cut a certain frequency that may be "annoying" for example in the total mix while the rest already sounds just right. The 4 stereo channels do have Low, Lo Mid, High Mid and High EQ. I didn't do much recording with this mixer yet, so I guess that you have done that a lot more (video was posted 1 1/2 year ago). When I got this mixer first, there was a learning curve for me too. Overall, I like this mixer.

[@EliasGadgets]

Yes the vid was cut as it would have been too long. I've max out using the mixer and know well it's negative and positive, it's an okay mixer for handling ones set but not a fully function recording mixer with an a very good built in interface, it's still a good mixer.

[@MrGuitarRadio]

Elias Khan I still have this mixer but I agree that there are better audio interfaces for computer recording and editing (DAW). I use a Presonus Audio Box 44VSL for the actual transfer to and from the computer. I use the mixer mainly for live audio at home, but the main out of the mixer can also be connected to the AB44VSL for recording.

[@gaboquintana3628]

that´s no lo mid botton is a frecuency selector , the pre botton means that the fader will not change the level send to the aux,

[@janxenjanxen]

niceeeeeeeee

[@janxenjanxen]

nice toy ;-)

[@creative12361]

hi there thanks for telling me i have put the phono left and right in the (2-tr/usb)input and sound is coming out of the main mix left and right with no eq working can the sound be eq so it sounds better on my pa system thanks

[@CarlosRodriguez-nv5hc]

Hi Sir,Thanks for the video.I have a question.Can i to conect 2 Microphones(Mic 1 and Mic 2) and to talk in both at the same time,but sound of mic 1 listen in speaker 1 and sound mic 2 listen in speaker 2????....Thanks a lot

[@EliasGadgets]

Yes you can connect more than 2 mic at the same time and talk in all of them the same time and output to you channel choice of which ever speakers, i.e main out or subs etc.

[@CarlosRodriguez-nv5hc]

jeje can you say me,how can i do?please.I would appreciate.

[@eddiebizness]

Question: Can this mixer be used with non-powered speakers for live sound?

[@rickwhitehead2359]

Ed Brainard yes but you will need a power amp to run them

[@distortimus7631]

Can someone help me? What firmware do I need to connect this mixer to my computer?

[@glennlubomirskynovitch3254]

Hi do i need monitors to make the mixer work? Even for recording?

[@creatingawareness1947]

Glenn Lubomirskynovitch you can insert headphones to listen to sounds.

[@johnburris3395]

You know just one time just once. I wish I could find something on KZbin useful. I'm a musician I need to know how that thing reports I want to hear musical instruments ran through that board. But everybody that buys these mixers all they do is fuck a microphone or a phone into it and they think they're doing something I don't get it why do you bother paying money out for a mixer to do that you can buy yourself a little wine mixer and do the same thing. I just pisses me off