Bench Top Tool Organizer - Wood Working How To

While stuck in quarantine, I built this scrap wood organizer to keep my most used tools at arms reach. This project changed my workflow, so I am still not sure how much I like it.
This video was inspired by Patrick Sullivan, check out his original video below.
• Instant Access Tool Ce...
All Music By Cheel from the KZbin Audio Library
Tool Links (Amazon Links Are Affiliate Links... This Helps The Channel)
Trim Saw- www.leevalley....
Digital Calipers- www.homedepot....
Incra T-Rule- www.woodcraft....
6" Ruler- www.homedepot....
Paolini Pocket Rule- www.woodpeck.c...
Fine Shapies- amzn.to/2NUxsuF
Ultra Fine Sharpies- amzn.to/39yEXiZ
Pentel P205 Pencil- amzn.to/3cp8L3B
Dixon Ticonderoga- amzn.to/3qYOlCy
Pica Dry Pencil- www.festoolpro...
Center Punch- amzn.to/3cu1jEe
Precision Screwdriver- amzn.to/3crBo08
Snap On Screwdriver- shop.snapon.co...
Klein Flush Cutters- amzn.to/3tb7lPX
Crescent Plier/Flush Cutter Set- amzn.to/36r3l4h
Scissors- amzn.to/3rbhdHV
Marking Knife- amzn.to/3ai8H31
Safety Glasses- amzn.to/36snDdF
Erasers- amzn.to/39ycp9p
Feeler Gauge- amzn.to/3apfp7s
Utility Knife- amzn.to/3ozKTg6
Starrett Combo Square- amzn.to/3r7dZ8d
Woodpeckers Mini Square- www.woodpeck.c...
Magnetic Tray- amzn.to/3akEal6
My Other Most Used Tools (Affiliate Links)
Dewalt Drill Set- amzn.to/2MlAwzl
Total Boat Resin- amzn.to/3r6W3dH
Dust Collector- amzn.to/3j1VGi1
Table Saw Blades- amzn.to/3j2mWg6
Router Lift- amzn.to/2MbNOP1
Miter Saw- amzn.to/3aoX8a4
Electronics Screwdriver Set- amzn.to/3ag5NM2
Dewalt Router Set (You Want The Edge Guide)- amzn.to/2MoGGP4
Wood Glue- amzn.to/3j5ncLs
Quick Setting Wood Glue- amzn.to/3coFENT
Jet Lathe- amzn.to/2NUM64X
Bandsaw- amzn.to/3r9MFGs
Dewalt Planer- amzn.to/3cvIIaS
Essential Channel Lock Set- amzn.to/3oEFjsK

[@ihrescue]

Well planned and implemented. Magnets - now that's the ticket.

[@kevinsorensen367]

This is exactly the type of tool organizer I was looking for! Thanks for the inspiration

[@ckmoore101]

FYI, you want to store sharpies cap side down. Otherwise gravity will slowly move the ink to the wrong end of the pen.

[@terrellbird4789]

I like your idea especially for a super small shop!

[@kevinthomson6324]

Really need to take the time to build one of these. The amount of time I spend looking for tools I just had in my hand is staggering!

[@KennethColeStatenIsland]

We all have different needs. you have given me some good ideas. Your voice is very easy to listen to. Keeps my attention.

[@CombsDesign]

Awesome! Thanks for watching!

[@GraemePayne1967Marine]

A very interesting project, and something I really definitely need to do myself. I also remember watching the video you references, so now I have two to refer to. I NEED to do something, because its been weeks since I actually saw the top of my bench.

[@hndygrl]

Well planned and executed! I'll be making a similar one for the counter top and possibly modifying to do double duty as a workbench accessory! Thank you for sharing!

[@GraemePayne1967Marine]

Very interesting design and making method. I am planning something like this for myself, so I am looking around for ideas - this is one of the good ones. thank you. As a retired electronics tech, I also like your logo.

[@kevinwhiteaz]

The quality of work AND audio/video is top notch and as impressive as full time channels that have been around for years! I’m proud to be one of your first 100 subscribers! Keep pushing out great content.

[@CombsDesign]

Thank you so much, that really means a lot!

[@PolishX]

I like it, I've contemplated either building something like this I can move around. I'm not 100% sure I want to try french cleats so this might work really well

[@jujuwatake]

Nice

[@Redneckcountrycowboy49]

I give you a project and I'm pretend it looks like a great project. I wish I could make children for my apartment workbenches but I don't have the tools to do it the means to do it or The woodworking knowledge to do it. I don't have anybody I could turn to to help me with the project like this or I don't have the blueprints on how to do the project and do it as good as you do it. Great job keep up the great work.

[@edrobinson1613]

Just what I wanted. Thanks...

[@ecaff9515]

Great inspiration. i really enjoyed your video and thought process. Thank you for sharing...

[@CombsDesign]

Thank you so much! I am glad you enjoyed it!

[@tekviper9]

New subscriber :This is on my list to do and yes I saw the same video that inspired you. Thank you for sharing!

[@CombsDesign]

Thanks for subscribing! It has changed my workflow, but having all of my main tools at arms reach has been really nice.

[@ScrewItGarage]

Nice dude, well edited and shot, very impressive, hope your channel catches on soon

[@CombsDesign]

Thank you so much! It means a lot. I love sharing knowledge and builds with people so they can go make awesome stuff.

[@YTubeSDD]

I really like your design and the video. Thanks. The thing about only using CA glue (super glue) is that it only bonds temporarily. It gets brittle and can lose its bond over a couple years. I'd recommend more wood glue or maybe brad nails in addition to the super. glue.

[@rafaelortiz327]

I think it's awesome! very useful 👍.

[@ohwii]

Great build. There should be more video on these organizers. I would suggest handles on the sides so it is easier to carry.

[@CombsDesign]

Great Idea! Thanks for watching!

[@philipselman2564]

Handles are a great idea ⭐⭐⭐⭐⭐

[@paulfrost8952]

You need to reduce the height of the guard on the band saw to gap much smaller gap between it and the work piece being cut , say to about 10mm (I can’t remember the exact height gap, but in needs to be minimal).

[@Mark_L]

Ah, You have the elusive Snapon ratchet driver! One of my best ever tools! Can’t get that model anymore. ☹️

[@CombsDesign]

Oh no way! I thought they were still sold! It is hard to understand how great of a screwdriver it is and justify the cost until you have one.

[@jokotravels8557]

Why was the bandsaw sparking when you were re-sawing? Great build though, it looks great.

[@phillipfonville421]

Nice build. Not sure something like that would work for me though.

[@CombsDesign]

Thanks for checking out the video!

[@NielPrankus]

👍

[@sparky0288]

What brand super glue do you use?

[@CombsDesign]

Nothing specific, typically just whatever is on the shelf at Home Depot, normally the Gorilla brand.

[@GrenMagg]

FFS get a push stick when using table saw.