Benchmade Griptilian Vs. Spyderco Paramilitary 2 Featuring the Hogue EX03: At KnifeCenter

[@knifecenter]

Congratulations to Kingston73, who we've reached out to as our big winner. Enjoy your new Paramilitary 2

[@powpow1973]

KnifeCenter thank you knife center! I sent Aaron an email today.

[@sagepini9844]

Love the Paramilitary 2! I'd take it over the Benchmade any day.

[@appalachiangunman9589]

I’ve had a couple of Benchmades. I’ve never owned a Spyderco but I just ordered a PM2 and I think I’ll like it better than any Benchmade I’ve handled.

[@ksimpson2804]

@@appalachiangunman9589 so it’s been 5 months. How is it? Do you like it more than your benchmades? I’m on the fence rn and can’t decide between the griptilian, freek, or PM2

[@appalachiangunman9589]

@@ksimpson2804 I think I like it better than the Benchmades. The thumb hole on the Spyderco isn’t the prettiest thing but it is once you start using it, I also love the compression lock. Another thing I like better is the thin tip. My particular Benchmade that I have has kind of a blunt tip and it’s not the best for piercing tasks. The PM2 with its thin taper and full-flat grind give it a tip that’s great for piercing.

[@Deltathegoldenretriever]

I feel the exact opposite! But both are great knives

[@somebizarredude]

I have owned both and prefer the PM2. Better quality control, nice broad full flat grind, great ergonomics, no springs in the locking mechanism that can fail, nice grippy g10, recessed full length steel liners on all models and a press fit lanyard tube that indexes the liners perfectly for a consistently smooth pivot and centered blade. the S110V PM2 I have at 28° inclusive Is a really wicked slicer and is my main EDC.

[@kee7678]

Para 2. Strong, Sharp, LIGHT, Accurate and fine tuned. The options on the clip placement is great too.

[@richardadduci1436]

These are two of the best knives at their price-point on the market. I own both of them (and many others) but consider the utility from several angles. For overall utility, the Paramiltary 2 can't be beat. it is a very tough knife. I consider it a workhorse for the blade strenth and edge retention. However, it is a little too bulky for my comfort as a pocket too. The Benchmade Griptillian, on the other hand, is a much better EDC, in my opinion. It feels more comfortable in the hand, opens quickly with a flick, and can handle reasonably descent levels of every day chores. Both locks work very well. I like the Spyderco spine lock and feel that it is a bit superior to the Griptillian for really tough tasks that put a lot of stress on the lock mechanism. The Griptillian affords very quick deployment and it hasn't failed me yet. However, I'm not sure I would rely on it for high stress pressures in work situations. I love both knives, but my choicein which knife I would choose on a given day is more based on what I will be doing with it at the time.

[@josercarlucci]

Dear friends of KnifeCenter, Congratulations on your challenge! So, in my opinion, both are excellent, undoubtedly are the dream of consumption of all. The Griptilian axis lock is special for ambidextrous, but even so, the paramilitary 2 is unbeatable... my favorite! Unfortunately, here in Brazil, they arrive with prohibitive prices. Thank you for allowing me to participate, a big hug to everyone!

[@williamdarden2093]

I bought the Paramilitary 2 for my son last year for Christmas. My usual EDC is a Benchmade but would love to have the Spyderco.

[@Chewie8_2]

Para2 every day. I love the construction and good feel when in your hand.

[@dennisweigel6872]

I have more than 1 Griptilian and carry different one depending on the activity. I love the Axis lock and different colors, like orange when I’m hiking, or blue or black at other times. Though others have talked about quality problems, I have not experienced it, the quality is excellent. The 154cm blade material used in base models is a big upgrade from knives I have carried in the past that wouldn’t hold an edge for a day. The 20cv looks like a great upgrade. I have no Spyderco knives but from the many positive comments, I will be checking them out.

[@vcarvellas]

After collecting for about 6 years I finally added a PM2 to my collection. I own 7 or 8 each of Spyderco and Benchmade, and appreciate the advantages of both locking styles. To tell the truth, I hesitated buying a PM2 because it seemed like it might might be a little big to EDC. Moreover, it didn’t seem as compelling as something like Spyderco’s Vallotton (also a bit chunky for EDC) or as collectible as a Damascus Delica with jigged bone scales, for example. I have to say, however, that I couldn’t put it down. It felt so perfectly sized and mechanically solid, I carried it every day for a couple weeks, and I usually carry a different EDC every day. The Griptilian is certainly fast deploying and arguably more comfortable to hold with it’s more rounded cross-section, but the PM2 feels more like a piece of engineering. That said, I own a Hogue EX01 and it gives the big guys serious competition!

[@chupalow8105]

Griptilian- the options, looks, the in hand feel & you gotta love that axis lock!

[@diplomats51]

I have a Paramilitary 2. Just got it and I am super happy with it. It is probably my fifth Spyderco.

[@danielkim2635]

I would buy the Spyderco Paramilitary 2 because: 1. Full flat grind cutting edge. 2. More ergonomic. 3. Compression lock system. 4. More options in steel and handle configurations.

[@Tmankiller72]

Daniel Kim Exactly what I said !

[@jeffreylilja1755]

I think the Benchmade Griptilian is thier number one seller for a reasoni. However in my opinion, the Paramilitary 2 seems to be a step up in quality and comfort for me . I choose , Paramilitary 2 as winner

[@user-cd2nf8wm9w]

Where's your sharpening choil....

[@MPerry-ox9qb]

Ergonomic goes to the Griptilian. If you do some really hard cutting it doesn't take long for the PM2 scales to bite into your hands. However, the PM2 is much better in the pocket.

[@jeremyterwisscha6534]

@@MPerry-ox9qb it depends on your hands. Personally the pm2 grip is so much better to my hands then the bm551

[@BladeNinja77]

Paramilitary 2! Love the compression lock! Great working knife! Best edc ever!!!

[@kelloggcd]

I choose the Paramilitary 2 because of how it fits in my hand, but I'm a huge Benchmark fan. Both knives are top-notch. Made in the USA!

[@nativeknifeenthusiast6524]

I would go with the PM2, I have owned both in the past and I enjoyed the PM2 more. It's just a better knife all around :^)

[@londiniumarmoury7037]

@Rich Scales Except when your Omega springs break and benchmade refuse to repair it because you live in the UK, then they void your warranty because you had to open it up and modify it yourself with non official springs, forced to counterfeit.

[@vonniegowing4566]

PARA 2 , love the ergonomics in my hand (the choil, thinness, light weight) perfect EDC

[@sealevelbear]

For me it would be the Spyderco without hesitation. I prefer the compression lock, the flat handle scales, the opening mechanism, the handle scale material, and the full flat grind of the Paramilitary 2. Knifecenter is the best, great contest, thanks!

[@joedickensheet4628]

Spyderco PM 2 because I have not yet owned the other 2. Although I will get the Griptilian soon! Knifecenter Rocks!! Awesome service!! Thank you!

[@inlikeflynt56]

Own both but the PM2 for the win. Simplicity and the compression lock are what does it for me.

[@WC-JKD-BJJ]

I own both of these knives and they are two of my favorites for EDC. I like the Paramilitary 2 better for outdoor use because I find the blade shape to be more versatile in a variety of different grips and the compression lock to be less prone to breakage than the Griptilian's axis lock (because of the the omega springs). However, I think the Griptilian is better for carry around the office because of its deep-pocket clip (on the G-10/20CV model) and more subdued appearance (i.e., it looks a bit less "tactical" than the Paramilitary). If I could only have just one, I'd probably go with the Paramilitary because it is a better slicer, but it's a very close call. Both are excellent knives.

[@BC-ev4hl]

Spyderco Paramilitary 2 C81GPDBL2 would be the one for me. I've always liked the feel of Spyderco's knives in my hand whether the Delica or Endura or my Police folder. Plus this particular model is a purplish blue. LOVE IT! And Knife Center? Thanks so much for the chance of winning!

[@joet.3091]

I own both. They are both fantastic edc knives. I like the benchmade for work and the spyderco for other times. Both are extremely well made and very sharp.

[@Semitotal]

Gotta go with the Spyderco for this one! I'm a sucker for their handle design.

[@ericdmason]

I own the P2 in S35VN and I love it. The G10 handle scales are super grippy, very ergonomic, and lighter weight than I expected. I’m a big fan of the blade steel as well and it’s slicing ability is fantastic. Love the compression lock, also.

[@gek1105]

I own the Para 3 and Grip, but the Hogue looks right up my alley with the button lock. Have always liked the button lock.

[@danstraus9657]

Hard to decide-I have bought both & use them for different purposes. They are both outstanding in their own ways

[@alrahbi77]

Para 2 is my favorite ever , the size of the blade is exactly what you need in EDC knife and it looks cool too.

[@neilbaker7679]

I would probably buy the Griptilian. I have always found my Benchmade knives to be reliable, sharp, and well made, with great customer service. The Lifesharp service is also excellent. I like the different blade profiles offered in the Griptilian line, and also the variety of colour options for the handles. I also like the axis lock, and I am very familiar with it, as I carry a Benchmade Barrage as my EDC.

[@BeardedHiker]

I’d probably choose the Griptilian. I’ve had the PM2 before and loved it, but my favorite all time knife is the Griptilian. I owned one in the past but lost it during a camping trip. Just never got around to getting another one.

[@elwoodgonzales5719]

I carried a Para 2 for over a year, but my Griptilian with G-10 handles and CPM-20CV blade has been my EDC now since 2016. The fit and finish is impeccable, with a perfectly centered blade and zero play. It holds a shaving-sharp edge and requires little maintenance. The Spyderco is great knife, but my Benchmade is just perfect for me!

[@mkoontz007]

I'd go for the pm2. Been wanting one for a while. Great company, great quality, and I like the operation of the lock much better.

[@kagato82]

I do love my Griptilian and would buy another in a heartbeat. I have never owned a Para, so I would probably have to go with that one. Thanks KnifeCenter!

[@yzagarin]

I own paramilitary one, bought 4 years ago. Believe it's the same size as para 2. Use it a lot, very good in retaining edge, comfortable G10 handle, safe back lock, very sturdy.

[@thescalz]

I have wanted a Spyderco knife for a long time. I like the look and feel of them, especially the big circle hole on the blade. They have a good reputation. That is the knife I would buy.

[@mynameshickisha3648]

I really love that spyderco paramilitary 2 it’s a gorgeous knife love it!

[@victormason8816]

I would buy the Griptilian. I love the Axis lock and the ergonomics fit my hand perfectly. Made in Oregon, too!

[@oleah454]

I own three Griptilians (154cm, custom d2, and G10 20CV) and 5 PM2 (S30V, S110v, XHP, Elmax, S35VN). For edc it really depends on your task. The tip strength is less on the PM2 but it is a superb slicer. The Griptilian is a great knife for more all around cutting tasks because of the heavy duty blade profile. My daily cutting tasks are usually slicing so I usually carry the PM2 and prefer it for edc. Both are great knives that will last anyone a lifetime if not abused.

[@travisaurus_rex]

EX-03. I had the EX-01 before and it was stellar. It was probably the most comfortable to use knife that I've ever owned.

[@MegaYangman]

Own both ..the griptilian in m390 and the para2 in s30v. Love them both!

[@benjaminmann5464]

My favorite is the Benchmade Griptilian (because of the looks) but both look to be very durable and reliable.

[@stephenmaloney776]

I like the Griptilian, since I already own 2 Spyderco's. I really like the Hogue, too!!

[@william_alba]

All three look great. I have a Benchmade and Spyderco, so I'd go with the Hogue to try something new.

[@joesprinkle2740]

I have both knifes in an upgraded version, they are both such great knives. I would have to pick the griptilian (my personal choice would be the upgraded model) because of the deep carry pocket clip and a very very slight edge of the axis lock operating system. This is one very hard choice, that there is no loser here, only two true winners that all knife owners should have each knife.

[@steveseiple871]

I have owned and used the same mini grip for over 13 years. Took it around the world with me, including Iraq. It’s still going strong. It’s got its bumps and bruises, but that just adds character to the knife. That being said I’m interested in the pm2. I love the design of it from top to bottom. So I would go with the pm2 upgraded version.

[@Sideshow320]

I think they're both great edc knives but I'm going to have to say the Benchmade Griptilian just in case I win. I already have 2 Spyderco Paramilitary 2s (both bought from you guys) and I love them both. Btw, you guys run a great business, very professional, very fair prices, and great customer service. Thanks for everything! Until next order!

[@AlfredoRGuillen]

I will go for the Paramilitary 2 every day of the week. Compression locks are safer, are ambidextrous, can be unlocked with gloves on and they don't accumulate gunk as the Benchmade axis lock does (they are way much easier to disassemble for cleanup purposes). Spyderco tolerances and quality control are superior to those in Benchmade models and prices are considerably lower. Blade in the Griptillian wobbles (horizontal blade play), grind is not particularly well achieved (inconsistent in both sides) and scales feel cheap. Hogue is out of this league as they produce beautiful kinves (heavy though) but still with quality control issues (blade centering, blade play, etc.). Paramilitary 2 or Para 3 are way much better option than Griptillian and Mini Griptillian.

[@patricksmatrick6193]

Funny, my Spydercos have just as much dirt built up as my Benchmades, so that's not relavent. I don't have a single Benchmade with an issue, grind, centering, lock up, and, I have sent far more broken Spydercos back for repair then Becnhmades. So after your done with your fanboy rant, put both brand's blade steels head to head and you'll notice that Benchmade comes out leagues ahead of Spyderco in terms of sharpenabiilty and edge retention. It's all in the heattreat and sadly Spyderco isn't there, even Buck has them beat.

[@AlfredoRGuillen]

Patrick Koch I don’t dislike Benchmades. I actually own quite a few. Still I think Spyderco has achieved very good quality standards (take a look at the integral Nirvana or the beloved Slysh Bowie). You will then change your mind.

[@patricksmatrick6193]

@@AlfredoRGuillen that is true, Spyderco does some amazing titanium.

[@AndrewC-12]

Never will carry any of the pm lines. Paper thin tip and "spydie hole" is ridiculous

[@robertkjos6306]

Both are great knives, i have both but the Benchmade Griptilian is simply the best i love it, love to own 2 of them.

[@billtreamer6420]

Houge please. I already have the 551 as my EDC. Great comparison video.

[@charlesdudek7713]

I like what Hogue is doing with quality, workmanship and value. I especially like the Deka.

[@mitchpelletier4500]

Both are great EDC options. I would get a standard PM2 over the standard Grip. The Grip with upgraded steel and handle material wins out for me in the end. The axis lock is much smoother and easier to use for me. I also think the Griptillians feel better in my hand. Both are great knives and I could make arguments for either one being superior, in the end it is just personal preference.

[@aray9628]

I would try the Griptilian because i own the PM2 which is a great knife. But ive never used a Griptilian i wpuld love to check it out I've heard so many great things about it. Awesome video and cool GAW thanks for the opportunity! Good luck everybody!

[@woodringarts2354]

Benchmade Grip with thumbstuds! Reliable, awesome grinds, relatively light. Only drawback is the handle thickness, but it’s manageable. I was never a fan of the pm2 handle, too long and the choil seems silly with such a big handle.

[@jenboslice]

I've been wanting a mini grip for a while now, I like all the options it has so you really get a chance to customize it to your liking. That being said, that houge micro flipper looks to be a pretty sweet little flipper and I really like aluminum handle scales. Also, the paramilitaries and griptilIans are pretty common and lots of people have them, so I think I'd buy the houge for the materials, fit and finish and just to have something really cool that you don't see very often. Thanks giving us all a chance to win one of these sweet knives and good luck to everyone.

[@B4Pand2mooses]

I would absolutely purchase the Spyderco Paramilitary 2. Ever since I purchased the Spyderco dragonfly 2 I have fallen in love with the Spyderco brand. The Paramilitary 2 has been on my list of dream knives for a while now due to the unmatched build quality and ergonomics. The paramilitary 2 could be a "holy grail" knife at the same time being an unbelievable workhorse. It is truly a work of art and craftsmanship.

[@Ruger44Redhawk]

I'm more of a Benchmade guy, but I do know that Spyderco makes a stellar product. It's hard to say one is better than the other when they are both well built tools. It really comes down to cosmetics because I don't want a hole in my blade and I do like the strength of the Axis lock. I've dealt with Benchmade customer service before and they are on it. I am currently dealing with them and waiting for an upgraded blade change on my full size 551 Griptilian. They actually said they would replace the 154CM straight edge drop point for an S30V straight edge drop point even though that isn't an option. I do like that 4" Hogue EX01 with aluminum scales. Nice review.

[@jsdunsmore]

IMO the Para2 just can't be beat. Hands down my favorite EDC blade.

[@ztectorist2118]

I own both, and I love both. I have several different variations of each, and appreciate them all for what they each bring to the table. That being said, if I were to buy a new knife and those were my only choices, I would probably buy a new Griptilian. Especially if one were offered with an exotic steel. All of the 'Grips' I own are older and I feel like newer version would help round out the family.

[@victornekrasov1510]

Definitely Para2. Feels like a more solid knife, and I like the overall feel of the knife and the variety of steels available in their sprint runs (if you can catch one)

[@nickstewart97]

I would buy the Griptilian. I absolutely love the Axis lock, and the overall feel of Benchmades. I have a few friends who own one, and I have always appreciated the quality that goes into each of their knife builds.

[@jdsteele7155]

My choice would be Paramilitary 2 because of the ergos of the handle. I've held both the Griptilian and Paramilitary 2 and the P2 fits like a glove. Thanks for the opportunity to own one.

[@edbundga9821]

I own a Spyderco because of the thumb opening design. This is a well built knife.

[@allyssasweanger6845]

One thing that makes the Hogue EX03 the right knife for me is the glass filled polymer, single piece handle construction. This design provides several advantages. Such as strength and no screws, which ensures no issues with screws working loose. Another thing that stands out for sure is the blade edge. Although, similar to the other two knives mentioned in the video, the EX03 offers the one-handed closing feature and is designed to keep your fingers from having to cross the closing path of the blade. A disadvantage is the right-hand bias. Another disadvantage is the fact that the blade lock feature only applies when the blade is opened, not when closed. To some this doesn't matter, but to me, it detracts from the utility standpoint. A cosmetic detractor, to me, is the seam along the spine of the handle. I think if a little more time during the manufacturing process, it could be better cleaned up to the point where it would disappear, otherwise the attention to detail in the build of the EX03 is outstanding. So, it comes down to the handle construction. Otherwise, the other two knives are better in many ways.

[@leestephenson4952]

Although I recognize Spyderco as a dynamic knife maker with a line of superb cutlery, I would buy an higher end mini- griptilian. I have a griptilian in 154CM with a drop point blade & black scales. I love that knife & the mini has been calling my name since they came out. Thanks.

[@alexisfarelo]

I must say I love my paramilitary 2! I'm on my second one and I have the Benchmade Griptilian as well but for me what sets them apart are ergonomics on the para 2, it is just ridiculous, it Contours to your hand or maybe it's just my hands, so amazing I give it the slight Edge. Also the sharp ass flat edge and clip options.... Cool video

[@Andy52358]

I believe I would go with the Benchmade Axis Lock. I inherited an automatic Benchmade and love the feel and sharpness of the blade!!

[@themasterswordlink]

I'd get the Spyderco. Every one that I have purchased has been exceptional fit and finish and perfect centering and I love the Spydie hole for versatility in openning

[@future_phonk]

I would buy the Paramilitary 2. The full flat grind, the option to choke up on the finger choil, the compression lock, and the overall ergonomics would be my reasons. One of the most comfortable feeling knife I’ve felt.

[@sethgilm]

PM 2 is a great knife. I own both and love both. Hard to choose but PM 2 might have the edge for me just for the basic materials used in the base model.

[@RyanBlackstock]

I would choose the Hogue EX03 for the button lock, making it easy to close one handed. They are all great knives.

[@wonadick]

the para2 is one of the best edc I've carried, I use to carry a benchmade styker until I got the para2 and it has taken everything I've put it through with no failure and love the compression lock. just the opinion of a left hander.

[@andrewulin6748]

All three knives look great. I have owned both a Spyderco and Benchmade. I carry daily a Benchmade Osborne 950, which I love. Between the safety of closing to the overall feel and quality, I would have to say the Benchmade Griptilian would be my choice.

[@vicentemendoza1668]

I own the Benchmade griptilian got it 3 days ago and I freaking love it it’s light weight compared to Tenacious and Ken Onion blur

[@JohnC29]

I have both PM2 and the Griptillian in 20CV sheepsfoot and standard. I carry the Griptillians most often.

[@mikelikesknives428]

The PM2 is my choice. The ergonomics are perfect for me. I love their sprint runs. Try to get them all. Thanks guys.

[@johneckstein6912]

I do have a mini grip in blue, a paramilitary 1 in D2 with green G10, a paramilitary 2 in S30V and camo handles, and a Para 3 with an aftermarket Lynch deep carry clip. All very good and understandable EDC choices. I carry the Para 3 more than any of the others, and feel that it has the best combination of ergonomics, materials, and all around usefulness. I would certainly consider another one in one of the upgraded steels. FWIW, some of my other Spydercos get more pocket time than any of the others (delica, caly 3, urban) but of the ones above, the mini grip gets carried more that either of the larger Paramilitaries.

[@scotthabermann5545]

I would buy the spyderco blue/purple paramilitary 2. I love the full flat grind and the compression lock.

[@wizardforlife9663]

If I bought one, it would be the 556-1 mini Griptillian with the satin blade. I have smaller hand and the mini Griptillian would fit like a glove. Even though it a smaller knife, they didn’t go easy and added G10 scales and CPM-20CV. To me, this knife checks all the boxes on the must haves and wants list. This is why I will eventually own one of these.

[@TdSharp]

I would get the pm2. I've already got a mini grip amd love it. I've never tried a compression lock. I'd love to try one

[@nichomas979]

Paramilitary 2 is what I will buy. Quality of the knives is amazing and so is the steel used for them. Also they are made in Golden, CO and since I live in CO I should own one.

[@thomd7886]

I would buy the EX-03. Love the locking features

[@donottech]

Benchmade grip is my favourite and will definitely edc it day and night!

[@johnhenry3022]

If I had to choose, I'd go with Griptilian. I have a PM2 in S35v, and I love it, but I carried my Griptilian more. It just fit my hand better, and I love the axis lock. Unfortunately, I had to take a flight on short notice a few months back, and forgot to leave it at home. Now someone from the TSA has got it. I felt like I had taken a kick to the stomach when I had to toss it in the bin. I hope they're treating it well!

[@ActionHero29]

and you just know someone just kept the damn thing for themselves...

[@cantbuyrespect]

they auction them off.

[@packinaglock]

Same happened to me with a mini Griptilian. 😥

[@fingercutz]

Hi Dave, I like the pm 2 more then the benchmade. I hope to carry it as my camping folding knife.

[@JaxBaron]

I would buy the paramilitary 2. I like the blade design and the compression lock. Awesome detailed comparison video!

[@callumguy4]

Pm2 I have one already and is a work horse. Can never have too many Spyderco’s

[@Seppiedog66]

Spyderco Paramilitary 2, I have a Griptilian, and mini grip. Plus I have been wanting the Paramilitary 2 with the Compression lock. Good luck all

[@krose8303]

I would choose the Griptilian, because the locking mechanism is ambidextrous, safer, and really solid. Also, having gone to the Benchmade factory in Oregon, I really love Benchmade as a company, they really take care of there employees and it's just awesome.

[@raulbanegas1982]

I got both ! The para 2 with S110 V and the knife work exclusive griptilian m390 steel , micarta handle , I like both the same.....

[@mkeithr]

I'd got for the Para 2 though I'm a fan of the Benchmade and carry a Hunt fixed blade every day. I just like the way the Spyderco knives feel in my hand and have owned at least one since my first Worker back around '90.

[@jwehrer2]

I have both which are both excellent knives for the price. I swap them back and forth for my EDC. They are both built well. Both came to me sharp and centered. I think the Grip is a little less threatening of a knife to pull out in front of someone. The Para 2 looks a little more murdery. I love them both and have multiple versions of each, grip, mini grip, pm2, and pm3.

[@JTown506]

Well I just got my first PM2, and don't own a Griptillian, I do have other axis lock Benchmades for comparison sake. I prefer a smaller knife for EDC (Bugout/Para3), but for work I have taken a liking to the PM2 size and ease of use with gloves on.

[@seanmick1073]

I would go for the paramilitary 2. I own the para 3 and the paramilitary 2 and use them as my EDC depending on whether I’m in Sac County (3” blade limit) or not. I have the blurple variety of each. Love the ergonomics and finger choir, the G10 grip, and the CPM S110V sharp blade. Also love the spyderco round hole for quick deployment and the locking mechanism. I’ve owned other Spyderco knives and Paramilitary 2 / Para 3 are my favorite.

[@wedo4444]

I EDC a PM2 now. Looking at picking up a Griptilian. That 20CV G10 version is looking pretty sweet.

[@jerryarmijo4860]

Spyderco! Been carrying an Enduro since early '90's and irreplaceable. Tried many different knives and always go back to Spyderco.

[@topblade7195]

My first choice would be the Spyderco paramilitary for several reasons: first, because I already own a Hogue ex03 and love it; then there is the slimmer profile of the para and I prefer the flat blade grind. Also, I like lanyard holes and make use of them with tip up clip position.

[@samlee458]

I love them both but I prefer to buy the benchmade in the 20cv steel. One of my favorite steel.

[@stevelink3]

Excellent comparison as always, DCA! As a user of the Spyderco Persistence, I also tend to like the Hogue EX-03 in this video. I like the ergos and the safety lock as well. Thank you!

[@carloshernandez4950]

I have a Para and I love it! If I'd win I figure two is better but since i have one I think I would buy the Hogue, something about it just speaks to me.

[@aarons7814]

I would go with the Spyderco para military 2 or 3. I have had 2 Spydercos for over 27 years now and they cut just like they did the day out of the box. I also have a benchmade bugout that has axis lock and thumb stud that is on most of the griptilians. The Spyderco hole is much better for one handed opening than the benchmade thumb stud. Also since the axis lock has a visible spring I am always worried about it failing if it gets too dirty. The finger choil on the paras is also a draw for more control.