Benelli M4 Midwest Industries extended M-Lok Rail installation and review fits Turknelli M4 clones

[@Venicebeachvids]

Thanks!! I didn't realize the ring was already installed on the guard out of the box. Your video made it VERY easy.

[@owenasmr.m2743]

Thank you for the close up of where the handguard meets the receiver!!

[@UpAnd2TheRight]

This is WAY more helpful than the instructions 👌

[@FloridaMan762]

thank you, I made the video since I had a hard time figuring it out initially and there weren't any videos at the time

[@Alster763]

Thanks Man, This is very helpful it is a really nice look, Midwest does a good job.

[@FloridaMan762]

it does add some weight to the end, the benelli already is a heavy shotgun haha

[@ahdootm]

When you need to dissemble your shotgun, do you need to loosen the 6 mounting screws and the 2 brass set screws or just the 2 brass set screws on the bottom? Thank you.

[@kaotmdct5568]

Thank you for a simple but very clear helpful video

[@TPMart-s3q]

Very easy to do once I watched your video. Thanks!

[@FloridaMan762]

thank you, I could of probably made a better presentation on the video😅

[@MrJoeFoley]

Great vid man! Im gonna get one too.

[@Tullminator]

Thank you!

[@granto798]

Love his voice

[@FloridaMan762]

[@tajjacobi6416]

great video, thanks man!

[@FloridaMan762]

thanks man, I'm new to youtube those words keep me making videos

[@Darealnoriega]

What’s the make and brand of that shell holder for quick access for the bolt?

[@FloridaMan762]

kzbin.info/www/bejne/r3fVdGOMl5WYldU

[@DeltaBravoOpr8r]

Have you seen the RxArms Heatshield? Do you think it would fit with the Midwest Industries rail?😊

[@FloridaMan762]

seems like its meant just to go on the stock configuration so without the midwest rail

[@thecerealking4]

Thanks for the video! Any recommendation how to remove sling attachment from barrel?

[@FloridaMan762]

you'll need snap ring pliers, you can get them from amazon or so for about $10

[@Venicebeachvids]

Yep. I just did a Lowes trip for those. Get a med to lrg pair, small won't spread enough. @@FloridaMan762

[@domingolalaquit6352]

What all you have upgraded with your benelli? Looks good

[@FloridaMan762]

@@domingolalaquit6352 not too much perhaps I’ll make a video on the setup

[@Tullminator]

That would be awesome! I would watch it. I just got this rail based on your video and Colin Noir's. To me it's the best looking and functional option. Thanks!​@FloridaMan762

[@REMYSCH]

Great video

[@Danny-pi7cc]

Where did you get the last round holder?

[@FloridaMan762]

kzbin.info/www/bejne/r3fVdGOMl5WYldU

[@InvidiousIgnoramus]

How well do you find it handles heat?

[@FloridaMan762]

shotguns don't heat up as much compared to a rifle as example, I can go through 100 rounds for example in a trip and not have any problems with heat

[@InvidiousIgnoramus]

@@FloridaMan762 sounds pretty good. I was just curious because I know it's technically interfacing with the barrel and ARGO system, so I thought it might get toasty like an AK.

[@aaronwilson4747]

Does this fit the Panzer M4?

[@FloridaMan762]

i'm not sure, but if its made to the same standard then it might

[@josephr.takeyama3576]

Yes it does, I can confirm since I have installed on mine. No problems!!

[@maddoxramirez3041]

do you know if it fits the m2

[@FloridaMan762]

i can say 100% that the M2 and M3 benelli stocks don't fit on the benelli M4, I know since I accidently bought the M2/M3 stock it didn't fit and I had to return it

[@ozzelot1983]

thx for your video

[@FloridaMan762]

👍

[@ozzelot1983]

@@FloridaMan762 did you had any problems without installing the set screws? I also do not want to install them ;D

[@FloridaMan762]

@@ozzelot1983 seems to add a minimal amount of flex on the handguard, however it doesn't have any problems in my experience

[@ozzelot1983]

​@@FloridaMan762 thanks for your answer. then I will make my order ;D

[@FloridaMan762]

@@ozzelot1983 yeah nice upgrade allows me to fit a light in a better spot and a qd sling mount for my 2 point sling, it does add some weight,

[@mtbike6867]

How do I remove the sling mount?

[@FloridaMan762]

you'll need some snap wrenches to remove the sling mount

[@GR33NPooP]

What brand side saddle?

[@FloridaMan762]

mesa tactical

[@kritio1012]

So in theory this should fit a panzer m4 clone

[@FloridaMan762]

it should from my understanding