How to Fix a Newer Maytag Washing Machine that Won't Drain or Spin

Рет қаралды 77,386

Күн бұрын

Do you own a Maytag washing machine that won't drain the water out, and simply will no longer run? In this video, I show you how to investigate a few different things on how to solve this.
DIAGNOSTIC MODE TO FIND ERROR CODES: • Maytag Washing Machine...
DP1 Pump (works on some units): bens-appliances.com/products/...
W1087660 Drain Pump (Same as on this machine): bens-appliances.com/products/...
You can buy appliance parts w/ a great warranty at: bit.ly/3pVxWyX
Like or Hate the Hat? Buy the Hat! bit.ly/3dtHHjE (The hat is NOT an endorsement of any candidate, party, or ideology. I am just a big fan of parody)
Tools I use in all videos can be found at my Amazon Idea Page: www.amazon.com/shop/bensappli...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/BensappliancesYT?lo...
CashApp: $BenjaminSchlichter
Affiliate Disclosure Form: bit.ly/3oXeu3B
** Links to external websites and parts may result in me receiving a commission on sales.

Пікірлер: 66

@angiebby1122 Күн бұрын

I used your video for my Maytag washer. The washer was not draining, so my husband and I looked at everything and took the drains and motor apart as you said, and there was a piece of metal about 2 inches long about a 1/2 centimeter wide in it. The pump worked fine. We put everything back together, and my washer works! Thank you! I felt great afterward cause I fixed something on my own.

@troydday 3 ай бұрын

Well although this was not exactly my issue it did help me determine the issue. So thanks for that. My washer is maybe 1.5 years old. Once I watched this video I determined my washer was indeed not draining. Flipped it over to check the pump and hoses after draining manually. Low and behold the wires going to the pump actually broke off at the point they came out of the harness. Probably from the ridiculous amount this thing shakes when running. Rewired and we are good to go! Thanks a ton

@keithchrysler3732 5 ай бұрын

A shop vac is really handy for draining the entire system with little to no mess. Don't waste time with a bunch of testing (my opinion) and replace pump. Great and very helpful video! Thanks.

@cavergirl123 5 ай бұрын

You are a gem! Me and hubby were wracking our brains on where the heck this filter was, couldn't find it in the manual (Maytag top load washer with deep fill MVW6200KW)

@FGLeon01 Ай бұрын

What was the issue with that model? Because mine doesn’t spin after it’s full with water. Any tips?

@hfxpro 7 ай бұрын

Ben, I have the Whirlpool version of this Maytag washer. Let me share my experience so other people may learn some items to check and when to cut losses. My water pump burnt out right at about the 3 year mark. Before buying a new water pump, I confirmed I was reading 120volts on the power leads, and the ohm reading was a bit low and thus figured it was the pump. Put the new pump in and it didn't start. Took an amp reading and got no amp draw. Figuring it might be a bad pump, I rigged up a 120 volt AC test lead to the pump and found it turned immediately. I then hooked up a 10 watt incandescent light bulb to the power leads and found it did not light when the drain pump was turned on in the diagnostic mode. This lead me to the board being bad. I should have cut my losses there and bought a new one, but decided to replace the board as it had been an expensive washer when new and had served me well so far. Replaced the board, ran through the diagnostic cycle and calibration cycle. Then ran an afresh cycle just to check for complete operation. I then loaded it up with clothes and it started working just fine until it was doing the spin for the end of the wash cycle. The washer went into medium speed spin, activated the drain pump off and on, and then about the time it should have kicked into the higher spin speeds, the timer stopped and failed to move forward. It does a similar stuck for the rinse and spin. I tried diagnosing more, but after checking the water indicator line for clean and a good seal, and all connections being tight, I can only conclude the board I got (which is a remanufactured as new by information on the box) is bad. I am now out $400+ dollars and so far Whirlpool has not been much help. Therefore, I recommend everyone that if you have this model, or the whirlpool equivalent, and the water pump doesn't burn out open, make sure you test both the pump and the power coming from the board for correct operation before spending anymore money. Otherwise, you will end up like me, $400 dollars poorer at the laundromat while trying to get some help from Whirlpool. I should note, the washer was used to wash about 1.25 load of clothes per week for the first two years, and about 3 loads for the last year. My experience with this washer breaking and then basically not being reparable has really shaken my faith in buying another Maytag / Whirlpool product.

@ashleymiller7439 6 ай бұрын

I had to buy a board for this machine, ordered it through the link off maytag's website and they sent me a fried board with scorch marks on two of the connectors, for $500! This company doesn't give af. I got them to send me another board and now I'm up and running though I can't set the spin cycle higher than medium or the machine just spins slow and hangs.

@mamadukes2219 5 ай бұрын

I completely second this!! Do NOT waste your money on this piece of crap. 2 and a half years old replaced actuator, clutch, and now transmission is gone all within a couple months!! Buying a used washer this time at least I won't feel so bad about it if it breaks in a year or 2.

@krissymc7085 5 ай бұрын

@@mamadukes2219 ours didn't spin...called repairman...he put a new acuator...6 months later...doing the same dang thing again!!! He said they updated it when he replaced it but I refuse to keep fixing it all the time..gonna buy different brand. They are not made like they used to be...Maytag used to be good...not anymore.

@mikevanhook6683 9 ай бұрын

Nice job you help me fix my Maytag as far as other suspension rod for a bad in it and I learned that from your video thanks a ton

@frankstone3994 Ай бұрын

Thank you! You just saved me 800 + dollars!!!

@JemHS 5 ай бұрын

Thanks for making this VERY INFORMATIVE video. My wash basket won't lower itself. It sounds like it's full of water. 😢 Hopefully I can put this new knowledge to use.

@chutesandladders1980 4 ай бұрын

Absolutely hands down the worst washing machine I have ever owned.

@HughWoo 2 ай бұрын

It is an absolute piece of shit

@MF-gx9yd 2 ай бұрын

Literally I’m here trying to figure out why this stupid thing has no error code, won’t drain, and won’t unlock. 💀

@chadryals4745 Ай бұрын

Apparently you never owned a Samsung that were know to fly apart

@hendrakurniachanel8902 9 ай бұрын

Good job guys

@eastcoastwatch672 9 ай бұрын

Thanks Ben for all the information you’ve provided on KZbin. I’m 70 and still learning and that’s why I enjoy watching your channel. I faced the challenge of my banging model # WP350ANP/XAA01, 2012 Samsung “VRT Steam” front loading washer buy replacing all four shock absorbers, spider bracket, seal, and bearings but now it bangs at just the start of the spin cycle. I’ve watched yours and others videos searching for the combination of button presses to do a calibration and tried all that I found but still failed to achieve a calibration. I’m wondering if you could help me with that information, it would be greatly appreciated. Kent 😊

@Tom-Travels 9 ай бұрын

Very nice. I appreciate your videos. Please keep it up! Please let me know when you get Patreon set up!

@user-ew5gx5hm5h 9 ай бұрын

My GE washer that I bought in 1997 died in August. It was not unexpected and in preparation for this day I researched various replacement washers. Thanks to your incredible videos I decided that a refurbished machine was the best option. I had planned to buy from a local company. But the handyman who is doing work on my home got a washer from a lady who replaced it with a new one. The lady said the washer still worked. It is the Roper RTW4440XQ. The washer was cleaned and has been fine so far. The only info I could find about the machine was its listing on Lowe's website. It was made in 2011 and has been discontinued. Maybe it was not popular? What has been your experience with this Roper model? I can't find any videos about it.

@atbecmda 9 ай бұрын

Thanks for informative video 🍀

@bensappliancesandjunk 9 ай бұрын

So nice of you

@mnw5177 7 ай бұрын

good evening sorry for bothering you on Sunday but I have a Maytag centennial washer that makes a big jerk at the end of the spin cycle could you please tell me what that could be.

@shawnmartin2358 4 ай бұрын

I have a top loading Maytag. Did the diagnostic test and rinse lit up and stayed lit. Any suggestions??

@suphearunmam9629 2 күн бұрын

Maytag is junked after 4 years machine is down related drain pump, after I have been working on the pump restart machine light 💡 back on I did bleeding air out of valve still the issue. I’m going back manually machine less stressed from many sensors switched.

@silbiamoreno5453 8 ай бұрын

I had a whirlpool commercial quality that lasted 20 years. I am disappointed with the latest Maytag purchase. Its only a year in and not draining, F9E1 error

@CoreyKovacs-sti 23 күн бұрын

My wife replaced the pump and still getting f9e1 error message

@kameronhandy1717 9 ай бұрын

How is it that you know how to read wiring diagrams. Could you make a video on that?

@happyandblessed9753 9 ай бұрын

My new Maytag is bouncing all over the place. How to put suspension rods on a newer model and recalibrate it?

@silbiamoreno5453 7 ай бұрын

Thanks. The issue with our model was the wirre not sending power to the pump. The wire iverheated and broke but not at the connection area. Odd that it was about 12in from control board down.

@hfxpro 7 ай бұрын

That seems to be a common occurrence from videos I have seen. The wire is a light gauge aluminum and seems to have a problem with breakage.

@BrunoFerreira-sf6gr 9 ай бұрын

🙋‍♂️Hello my Friend ben...hello brasil...👏👍😁🇧🇷...thanks video...

@bensappliancesandjunk 9 ай бұрын

Hello 👋

@bukursglass6990 9 ай бұрын

When you sell your older direct drives do they fetch a similar price as your newer used machines?

@bensappliancesandjunk 9 ай бұрын

Depends on model but generally yes. We price them near the same. IMHO a Kenmore Elite Direct Drive is the crown jewel of the DD collection, and its priced as such if we can get them working the way we want.

@bukursglass6990 9 ай бұрын

@@bensappliancesandjunk I have a kenmore direct drive in working on currently, is there models you would recommend me staying away from? I picked up my first batch of washers and dryers the other day

@bensappliancesandjunk 9 ай бұрын

@@bukursglass6990 all the DDs are great. The only iffy ones are the newer ones that have the Automatic Temperature Control switches (ATCs) as they are costly to replace. But not otherwise difficult to work on or fix. Just a newer wrinkle on repairs that most built before 2008-ish didn't have.

@bukursglass6990 9 ай бұрын

@@bensappliancesandjunk your amazing man!! I actually broke the lint filter on this kenmore, it sits at the bottom of the drum, I’m sure you know what I’m talking about, I’ve been taking a part each appliance and deep cleaning them in hopes it will add value for my customers, I was so worried cause I couldn’t find a replacement lint trap online , but I found lint trap plugs, have you ever heard of them or ran into this problem?

@Nathan-vb2xp 9 ай бұрын

Just replaced a TWO year old one of these. Main circuit board went out and was replaced and replacement went out immediately. Technician said now have to install another board and electronic lock that appeared to trip board. Technician was nice guy but third time to house in six weeks to throw parts at a machine that has too many defects. Gave up. Bought GE Commwrcial grade that might be junk too hopefully not but at least has 5 years parts and labor warranty

@ashleymiller7439 6 ай бұрын

Was it the lid lock? Mine shorted out and blew up the control board. The lid lock thing has a relay in it and it's powered off AC mains voltage! Absolutely insane, and when it shorts it blows up components on the main board. I don't know what repair guys are paying but a consumer getting these parts from maytag pays 200 for the lid lock module and 500 for the control board. The first control board they sent me was fried and had scorch marks on one of the pcb header sockets.

@flyonbyya 9 ай бұрын

Hey Ben, I recently bought a perfectly functioning Maytag washer produced in Sept 1985 as a spare. I’ll be storing it in my garage here in freezing Michigan. Q. Need to winterize it? Q. If so…what do I do? I’m fairly handy…so I should be able to follow your directions? Thx Doug

@bensappliancesandjunk 9 ай бұрын

Just make sure all the water is drained. I'd be more worried of mice honestly

@flyonbyya 9 ай бұрын

Ok, Just wondering if the pump will break if it has water in it and freezes

@shadowopsairman1583 9 ай бұрын

@@flyonbyyayes

@nanse8548 9 ай бұрын

Ben, What do you think about the combo washer dryer unit?

@bensappliancesandjunk 9 ай бұрын

The one I did the review on?

@shadowopsairman1583 9 ай бұрын

Anything outside of the top load Timer Switch Whirlpool based washer or the Belt Driven Whirlpool based washer, are nothing but trash. Dont bother with laundry centers or front loaders.

@devonmarshall6797 4 ай бұрын

Hey Ben. I have this washer. Woke up one day and washer wouldn't do anything. I replaced main control board and it powered up and seemed to be working until the spin cycle started. It will not spin fast and it won't quit spinning staying on 25 minutes on machine. I can stop the wash and turn in to drain and spin and it will complete the fast spin cycle. Any advice?

@devonmarshall6797 4 ай бұрын

Also I have no error codes.

@devonmarshall6797 4 ай бұрын

It just keeps spinning for hours on slow.

@adrianfajardo9598 8 ай бұрын

Does anyone know what that star looking plastic that’s on top on the drain called he showed it at 3:34

@richardmackow1755 5 ай бұрын

RAM, I believe the star shape is a star shaped locator for the drain filter which is a piece of. Remove the drum and clear drain filter.

@burgessbrooks4435 2 ай бұрын

So a whirlpool pump will work for a maytag washer? Washer Model # MVWB765FW0

@shadowopsairman1583 9 ай бұрын

Obstruction, bad wires/pcb, bad pump electromagnet, bad pump impeller bearings, worn out impeller. Bad lid lock.

@swampcabbage3239 9 ай бұрын

@@gregscott4479so go with pump and main board and u/i? Im confused as if the main board is sending voltage to the pump then its just a bad drain pump.

@shadowopsairman1583 9 ай бұрын

@@gregscott4479it's why I use a Timer Switch Direct Drive Whirlpool based unit with the water pump right off the drive motor. The only other washer I would use is the belt driven Whirlpool based unit due to ease of maintenance and reliability (yes WP fixed the pcb on the belt driven unit)

@hfxpro 7 ай бұрын

@@swampcabbage3239 I dropped a reply in here where even if you get voltage there, it can be ghost voltage caused by the water pump taking out board also. They changed the part number on both which tells me they had a really high failure rate. I would try fixing my own board, but in their wisdom, they incased it in some kind of silicone sealant that would make fixing it a very annoying job.

@Kevin-dr6qk 9 ай бұрын

Hey Ben help My Maytag washing machine (MVWB755DW0) was having a problem where the door lock would not work unless you pulled it up just a little. After replacing it now for it to lock properly we sometimes have to keep trying over and over for it to finally lock… used to get code f5 e2 now I only get f5.

@MargaretTovrea 9 ай бұрын

I absolutely HATE the Maytag top loader I purchased new a couple of years ago. I chose Maytag primarily because of the "Made in USA" tag on it. I now realize I should have taken into consideration the satisfaction I've heard from people who own Samsungs.