Thanks! Took some practice but angling the watch while holding the tweezers still is definitely the way to go.
@robocopvn Жыл бұрын
I have the tweezers, but I don't have any Rolex to practice on!
@DavidPhamChannel Жыл бұрын
They are probably good for lots of different brands. What are you using them on?
@robocopvn Жыл бұрын
@@DavidPhamChannel if you get my joke, thank you!
@ericchang95683 жыл бұрын
I wished I had seen this earlier 😭. I use a bergen 6767 and end up scratching my watch when trying to put on a rubber b strap. I think I might have also twisted my springbar because I put in one side first before wiggling in the other side, unlike the 7285 you can apply force evenly on both sides without twisting.
@DavidPhamChannel3 жыл бұрын
These tweezers definitely have changing Rolex bracelets a lot easier.
@user-qh7mv8np2sАй бұрын
I should have watched this before using a cheap spring bar remover that scratched the lugs of my airking. I have just ordered that tweezer you used in this video.
@DavidPhamChannelАй бұрын
Sorry to hear that, these will work perfect for your watch.
@Harry_167103 жыл бұрын
Great "how to" video. Thanks!👍🏼
@DavidPhamChannel3 жыл бұрын
Glad you enjoyed it!
@dereksbooks4 жыл бұрын
Nice tip 👍
@jasonwalsh92114 жыл бұрын
Nice demo,.thank you
@stegeorgy603 жыл бұрын
I have these and can concur that for Omega this is poor as it is difficult to grip the spring bars successfully. Reverted back to Omega tool. Feels like the v cut in this tool is way too small for Omega spring bars. Annoying since I purchased for strap swaps on Omega.
@genericusername955119 күн бұрын
Switch your spring bars to Rolex style bars
@julienholmgren15433 жыл бұрын
Great. I need to buy this tool; I've removed the bracelet on my air king and now I can't put it back with a simple bar tool.
@DavidPhamChannel3 жыл бұрын
The tool will definitely help. Good luck, just go slow.
@Barry-263 жыл бұрын
Thank you
@DavidPhamChannel3 жыл бұрын
You're welcome
@flipmode459 ай бұрын
Great video 👍🏻 appreciated!
@DavidPhamChannel9 ай бұрын
Glad you enjoyed it!
@icychap Жыл бұрын
Thanks for sharing, but unfortunately you didn't show the most difficult part - how to access the spring bar when both sides of the bracelet are attached to the watch. When one side is detached, access is very easy.
@DavidPhamChannel Жыл бұрын
You are right I didn't, apologies. Didn't think it was too different. I just open the clasp and push the skinny part of the clasp over the lugs so its easy to access the spring bars. Its basically the same thing after after that point.
@icychap Жыл бұрын
@@DavidPhamChannel Thanks. Yes, I was able to find another video (Millenary) which demonstrated. Thanks again for the video.
@dezmarinvestmentsllc9964 Жыл бұрын
Agreed 100%
@Timjacks01Ай бұрын
Do they produce one for the omega?
@DavidPhamChannelАй бұрын
Not that i know of, its kind of spring bar specific. If you decide to use rolex springs bars on a Omega it will probably work.
@the.magnus3 жыл бұрын
Do you recommend using a normal springbar tool on the omega compared to this tool that pinches both sides at once?
@DavidPhamChannel3 жыл бұрын
I recommend the Bergeon 6767F for the Omegas.
@u.u.u9969 Жыл бұрын
Do the tips break easy?
@DavidPhamChannel Жыл бұрын
No, Bergeon makes solid stuff, be careful they can scratch your lugs if you are not careful.
@dougharlow60379 ай бұрын
Will the (Bergeon 7825 Spring Bar Tweezer Lug Removal Fitting Tool) remove the 2004 Rolex Datejust Turn-O-Graph 116263 with the two tone Jubilee bracelet?
@DavidPhamChannel9 ай бұрын
I don't know for sure but i don't see why not, as long as the spring bars have collars to grab on to it should work.
@francisingua124 ай бұрын
@davidpham is this for datejust 42
@francisingua124 ай бұрын
@davidpham is this for datejust 41
@DavidPhamChannel4 ай бұрын
Yup DJ41
@davehan2413 жыл бұрын
Thanks for the great tips. Hmm, how did you get the first side of the bracelet off both watches? I was wondering if the shape of the Bergeon 7825 allows you to remove a spring bar when both sides of the bracelet are installed?
@DavidPhamChannel3 жыл бұрын
Yes, correct. With the 7825, you are removing both spring bars at the same time.
@sak1xsak12 жыл бұрын
I detach the clasp from the center off first, then move onto either side of the lugs.
@KiwiMoto722 жыл бұрын
Do you recommend this for adjust the strap on Rolex too?
@DavidPhamChannel2 жыл бұрын
Should work if the straps have indents where you can easily access the spring bar.
@KiwiMoto722 жыл бұрын
@@DavidPhamChannel thx you David! how about Omega? work too? thanks again!
@DavidPhamChannel2 жыл бұрын
@@KiwiMoto72 no probpem. I'd use a spring bar tool with the Omegas
@skicrz Жыл бұрын
Can Rolex spring bars be substituted for Omega's
@DavidPhamChannel Жыл бұрын
Probably, I've never tried myself but they appear to be similar in thickness.
@theLabradorite4 жыл бұрын
This wouldn't work with older rolex watches with lug holes right?
@DavidPhamChannel4 жыл бұрын
Possibly, as long as they have the same spring bar and the opening is the same size or larger it should work.
@davidkaplan55173 жыл бұрын
What tool do you recommend to put a RubberB band on a Rolex steel watch?
@DavidPhamChannel3 жыл бұрын
These tweezers should work but if you are looking for a spring bar tool use the Bergeon 6767F.
@oddpout3 жыл бұрын
Quality of spring bars indicative of the brands x)
@artagain89774 жыл бұрын
What tool would you recommend for the Omega spring bars? I have a typical spring bar tool but it’s still really difficult.
@DavidPhamChannel4 жыл бұрын
I haven't used other versions of the tweezers so I can't comment on those. For me the standard bergeon tool works best.
@marcn8750 Жыл бұрын
Can’t you just change the spring bar to a double collar one for the Omega? After market … 🤔
@DavidPhamChannel Жыл бұрын
You may be able to but I never looked into it. Omega springbars are considered the highest quality and didn't want to use any generic springbar. I'm sure an equivalent Rolex spring bar would work just as well but again never looked at sourcing them.
@marcn8750 Жыл бұрын
@@DavidPhamChannel noted thanks. I don’t think one has to worry so much about the “highest quality” of spring bar. And as you said, a a Rolex double collar spring bar will be fine too. Just saying that this is way too much stress over a spring bar. Appreciate your video. It should be easier to remove an omega bracelet and at a minimum … a double collar.
@osobad1127 Жыл бұрын
How much is this tool?
@DavidPhamChannel Жыл бұрын
If i recall maybe 200
@carzakone3333 жыл бұрын
What about Tudor?
@DavidPhamChannel3 жыл бұрын
I have no idea, never tried it with a Tudor.
@resjon79812 жыл бұрын
It works a treat on Tudors once you have practiced a few times.
@desireless4092 Жыл бұрын
Watch head? It's THE watch.
@DavidPhamChannel Жыл бұрын
haha you're right.
@baba98052 Жыл бұрын
You don’t start from beginning. Watch strap is already disconnected.
@DavidPhamChannel Жыл бұрын
Its easier to demonstrate the tweezers with one side of the bracelet disconnected.
@bas42415 ай бұрын
Nice tool, but ridiculously overpriced! There are other cheaper options.
@DavidPhamChannel5 ай бұрын
Very true!
@charlesmills8854 Жыл бұрын
This would be great if you showed more and talked less AND if it was accurate. My Rolex does not have the same header links and no holes to easily access the spring bar