Loved the way you still put your hand to the back looking for the presser foot lever to lift the foot, Jeff, and then stopped yourself part way because, of course, not on this machine! I'm still getting used to not having a presser foot lever on my 570, it's hard though after 50+ years of sewing. Great machine of course and I'm watching all your relevant videos about it.
@makingitthrough19010 ай бұрын
I must have been living under a rock - i did not know how the hook goes into its housing. I have just been trying to put it in with my fingers which is such a tricky maneouvre. Thank you for including that.
@123gorainy Жыл бұрын
Thank you SO SO much! You really helped me out and saved me a 50-mile round trip to the sewing machine place plus repair costs. Also ordered your cool credit-card cutter, I am NOT using that auto thread cutter again.
@jvortherms32 жыл бұрын
I always love listening to Jeff on all his information on Bernina's. Thanks for being there for all of us.
@rebeccapurvis44818 ай бұрын
As a new Bernina owner, I'm flabbergasted by all the things I need to know. This is so helpful!
@dianesatterfield1290 Жыл бұрын
While you didn't address my personal issue (570 QE FHS insertion problem - user error I'm sure), I learned so many things from these tutorials!! Thank you so much!!
@craftymystic48682 жыл бұрын
Did not know thread nests hurt the cutter, had to have my (Viking) machine cutter replaced last year after a particularly difficult project was producing pretty repeatable nests. Ima fan thanks for sharing your knowledge base, and love, love the sharpening you did on my scissors.
@melaniedavis25262 жыл бұрын
Thank you Jeff! I always learn so much from you!!
@debbyomalley7976 Жыл бұрын
Thanks a lot Jeff! I cleared the Jam. This is the first day I'm sewing on my new 570Q I appreciate all your tips. I'm now subscribed as well.
@sewquilty2 жыл бұрын
LOVE Bernini Jeff! I always learn so much about my machine by watching you. Thank You So Much!
@ericaporteous5075 Жыл бұрын
You’re a lifesaver yet again. I had forgotten your previous advice about retreading the top after a fit of bird nesting. Thank you.
@deidrapowell87622 жыл бұрын
Yep I get that thread nest all too often. Thanks for showing this. I already had cutter repaired once.
@sharonoconnor77692 жыл бұрын
Always learn great machine care and get really useful tips from your videos. Thank you so much!
@lisawickstrom48042 жыл бұрын
Me too thx Jeff!
@tanyawatson37762 жыл бұрын
I love watching you I learn so much from you 💓❤
@sewingmachinemastery2 жыл бұрын
Great video Jeff thank you for showing the problem on cutter system
@judymathison68852 жыл бұрын
I bought a long handled tool that had a razor blade on the end. It’s made for cutting under the fabric. Works great.
@laviniajohnson92102 жыл бұрын
Got to say a big thanks for your video. I had this very problem so followed your advice and amazed myself by sorting it out and saved myself a good few pounds (UK) in the process.
@marytaylor84172 жыл бұрын
Thank you from Creston, Ohio!
@JScha-i1z10 ай бұрын
I have a Bernina B590.Since the beginning I have had trouble specifically with black thread, at the moment it is black Aurofil thread. I constantly have a nest under my fabric after a few inches of stitching. I switched to white thread (Mettler), first on the top, it worked fine, changed bobbin thread to white Mettler. All was okay. Switched back to black thread, Aurofil on top and Mettler in the bobbin. Immediately there was a nest. I then changed tho top to Mettler thread. It is working fine now. I have used Aurofil in green and red with no problems. This makes me think that the bobbin and top thread must be the same manufacturer. However, I know I have used mixed top and bobbin thread before and had no problems with other colors. Generally when changing to black thread, there is always a problem when first stitching. I thread, rethread multiple times and same with the bobbin along with using the cleaning brush. Eventually it will work okay with the black thread. It is infuriating. Can anyone shed some light on this? Thank you very much.
@terrihasstedt58552 жыл бұрын
Thanks Jeff, this is a problem I have, but lucky me I was doing something right
@KathrynGormanLovelady2 жыл бұрын
Brilliant tutorial - thank you!
@caitjohnson6021 Жыл бұрын
Goodness, my Bernina is absolutely ancient compared to these! So much to learn again…..
Have the 790 plus, my thread catcher doesn't have the icons. Know it should. Don't like taking machine in. Thank you for your help.
@berninajeff Жыл бұрын
The newer updates and machines clean the thread catcher easier just push the cutter button once you are in the cleaning menu
@devaette Жыл бұрын
6:41 hi. I’m trying to darn wool socks with a 590, using Madeira Lana in the needle & bobbin & stitch 34. Lots of thread breaks & bobbin nests. Can you advise me how to carry out the sock darning?
@berninajeff Жыл бұрын
Pull the bobbin thread up about 5 inches and hold the top thread when you start use a ball point needle
@annelowry2937 Жыл бұрын
very informative!!!!!!!!!!!
@berninajeff Жыл бұрын
Glad it was helpful!
@lynettemacpherson10612 жыл бұрын
Thank you so much. You are amazing.
@shannakashdan19242 жыл бұрын
Are there any videos on the Bernina serger? I am trying to figure out what is preventing my serger foot from swinging out fully, it is hard to thread the needles with this problem.
@eileenjasper-pottage94252 жыл бұрын
I have a Bernina 435. Do you ever do tutorials on this machine. Thank you Eileen
@Dragonflies082 жыл бұрын
Great video!!!
@valeriewerne7126 ай бұрын
Jeff, When I start sewing I have the tie off set. At the beggining it causes a small birds nest. It is not a clean tie off. What am I doing wrong? I am quilting and on 1303 stitch. Bernina B770 Plus
@valeriewerne7126 ай бұрын
Quilters' mistake, When I held the thread while it was tying off it came out perfect.
@winzig2222 жыл бұрын
Can you do a video on the BSR foot and why it skips stitches?
@berninajeff2 жыл бұрын
The BSR should now skip. There is an upgraded spring that a tech can replace to help that issue. It came out with the 830 so not all techs know about it
@TheSwissy4me2 жыл бұрын
I have a question. On my 770qe, I can’t change the stitch length or width very well. As I rotate the dial it jumps sporadically through the choices. For example. If I want to change to 3.0 length it jumps to 3.5 then .8 or 1.0 or anything AS I am turning the dial to the right to increase the stitch length or width. Both dials are doing this. I recently did an update and it’s been this way ever since. Any suggestions?
@christinelindquistfackrell58352 жыл бұрын
Sounds like your knobs have been damaged - check with your technician
@jwoschultz Жыл бұрын
What do you do when the hand wheel refuses to move? Bernina 480
@tarrotposh20702 жыл бұрын
Hi Jeff. my 2 year old bernina overlocker is losing powe and ceasing .if I turn the wheel it starts back up again ...very slow. any Ideas? please
@berninajeff2 жыл бұрын
That sounds bad needs to see a tech
@tamiroberts93042 жыл бұрын
Quality Sewing and Vac in Tukwila Washington will ship anywhere! Have no idea how they get a way with that but I would never have a new machine shipped to me! Just be aware of the silliness that’s out there! I’m driving 45 miles to pick up my new machine in a couple days.
@berninajeff Жыл бұрын
I agree
@tamiroberts9304 Жыл бұрын
@@berninajeff All warranty’s should be null and voided on machines that are shipped. I just bought my Kaffe in late December and I can in no way imagine a delicate piece of machinery such as this falling out the back end of a FedX truck! !
@dawnarlander91702 жыл бұрын
Can’t take the bobbin out on the 880’s… can you show a demo for us?
@berninajeff2 жыл бұрын
The 8 series does not lend itself to DIY you have to take it in
@carolmorrison51732 жыл бұрын
Please show us how to attach thread guide.
@lindacrawford96382 жыл бұрын
Please show some videos on the 440 QE MACHINE.
@berninajeff2 жыл бұрын
I put it on my list, one of my other favorite models
@dot71462 жыл бұрын
I have an old 440QE. I pulled it out when my 570 was in Spa. The 440 didn’t want to turn on after sitting in the closet for a year. Black screen. After about 15 minutes it came to life. 🙂 It is a great machine.
@marywilson888311 ай бұрын
Where to buy a credit card knife please.lm in Northern Ireland thankyou.
@hesterrobb45142 жыл бұрын
Questiion: Will Bernina ever bring out a clamp hoop for the Bernina 590?
@clairepaul7409 ай бұрын
If it can sew through leather, why does it go into a panic every time it has to sew over a seam???