Best 4th Gen 4runner Mods/Upgrades (And 2 That I Regret)

[@CanadianGearhead]

7 Things to consider before lifting your Toyota 4runner: canadiangearhead.com/lifting-your-toyota-4runner/

[@malakaialvin3725]

instablaster.

[@waynespringer501]

Now that this video is 4 years old, Is there any issue that has came about with having the headers installed during those 4 years?

[@thomasbeltran2050]

Just bought my first 4runner. And 04 limited. Great power with the 4.7 and a smooth ride at 156k.

[@meganstevefrost7326]

Xreas gone is huge improvement 100%!I 3in rear 4.25 front lift levels it out long travel , total chaos uca which made alignment a breeze!33"s and HDsprings if your doing bumpers and rooftop tent.Also icon torsion bar adjustable . Good video and info.

[@CanadianGearhead]

I'd love to do a long travel setup one day

[@Mick_A_Knuckle]

I replaced the lower control arm bolts on my 4th gen with Moog greasable assemblies from RockAuto. Not expensive, all steel parts, and have grease fittings and internal grease channeling to hopefully allow future adjustment as needed. Threw in Whiteline LCA bushings while I was at it.

[@Beezy_Builds]

Your build has always been inspiration for me

[@hmong_keeb_kwm]

Keep it up... is like 90% of 4runner video today is on the 5 gen showing no love to us 4gen v8... The best 4runner is the 4gen v8...

[@Grey86]

Trueeeeee

[@jamesmeredith8049]

Chong Thor BTL no, the 3rd gen v6

[@videotimebaby90]

Yes more 4th gen baby

[@brodyvissers]

3rd gen all the way 3.4L v6

[@evr-mr3cp]

Actually the best is my 85 fuel injected, solid front axle model.

[@Grey86]

The people bashing 4th Gens must be Jeep owners or 2nd gen 4runner owners. Same thing..

[@SergioLopez-tq6wq]

I'm a jeep guy (and owner) but 4Runners are sweet (I kinda hate the 5th gen because they represent corruption and socialism in Venezuela) but it is an awesome vehicle

[@in__abeyance]

Skoolblow 3rd gen owner here and fuck a 4th gen

[@bumwater3597]

mross58 id smoke your shit in anything

[@KidJaeProductions]

@@in__abeyance ew. You're bashing 4th gen.

[@tigergreg8]

mross58 I’m an owner of a 4th Gen and love it. Have the Sport Model. But every owner knows the 3rds are bullet proof if taken care of. The reason many don’t get them is , the 4th is more stable and obviously has more power and maybe a little more mpg, but not by much there. For me, I got this 06 2 years ago with only 62,800 miles on it, almost 81,000 now. That was my selling point.

[@rbzbreezy]

I just started watching your video while taking a dump. Now I’m a subscriber.

[@darkace3799]

Should have mentioned something about coating/protecting your frame. I cant keep a frame on these trucks to save my life. Or find one in my area that isnt completely rotted out. It's like no one has ever heard of underbody flush car washes.

[@jaacksun4674]

Gotta buy trucks from below the Mason Dixon buddy

[@colesisler582]

I’m getting a 4th gen in the next few weeks, and after getting over the giddiness of having one and driving it all over Timbuktu for a couple of weeks, I think the first 2 things I’ll do it’s beef up the tires and the sound system

[@KidJaeProductions]

Same here! Those are my main things before anything else. Aye, let me know what you get into

[@colesisler582]

Kid Jae I ended up just doing the radio (head unit) and as far as tires go I went with toyo open country at II

[@dbarber3033]

I have 03 limited 4x4 with the 4.7! Love it

[@steveeichelberger806]

I felt the same way about the SPC cam adjusters. Cheap for a reason. And like you said, finding every part number for the OEM items is time consuming, but probably the best route. I anti-seized my new ones, whether or not that will prevent the seizing, I guess time will tell.

[@CanadianGearhead]

Anti seize should definitely help

[@hedge313]

I just put five 265/70/17 Duratracs on my stock 4th Gen. Nice to have that last one as a spare. Really improved the look and stance of the truck.

[@el_blaxicano2]

step one: buy 4runner 😭😭

[@brucelee9941]

You can do it!

[@InteractiveMail]

Found my dream one AND was able to buy it

[@tigergreg8]

InteractiveMail What year and model did you get?

[@InteractiveMail]

@@tigergreg8 2007 V8 Sport.

[@tigergreg8]

InteractiveMail Awesome. I got the 06 V6 Sport. I don’t row so... Not sure if your model has the XReas Suspension but if so, and you want to get rid of it, and you would, Bilstein 5100 Kit on Amazon is def the way to go. I hope your frame is good. Youll want to take care of that.

[@Monroemanordogs]

I love my icons. They need to be rebuilt every 6-9 months but I haven’t seen many that don’t need to be every now and then when we off-road. The falken tires will never be off my truck so quiet so soft and paired with methods look awesome.

[@mattweir9674]

I just put in a TRD pro grill on my 08 V8 4runner, highly recommend it for the look on your rig as well! Also installed: 3" old man emu lift kit, broze Method wheels, BFG ko2 tires, gobi stealth rack with ladder JBL carplay head unit, alpine sub+ speakers, molle board, remote controlled port-hole style lights in the rear sleeping area and many other small things 🤘🏼🤙🏼

[@staticclutch9932]

Another thing that makes a difference (to me anyway) is removing that front plate unless it’s mandatory in Ontario but here in New Brunswick they recently made it legal to remove it and wow definitely prefer it that way.

[@CanadianGearhead]

I wish I could remove it. They talked about changing the law briefly but didn't end up doing it :(

[@danielwagner4064]

I hate the be a dummy. What's the front plate? I own an 03 V8 so I feel stupid asking but I genuinely don't know

[@CanadianGearhead]

Front license plate

[@andye9026]

I watched those videos man! Keep at it! Great content. You’re really the only one out there doing 4th gen stuff

[@andye9026]

I also totally second that tires are hands down the best bang for your buck in terms of performance.

[@donni.v]

Manz was feeling the heat and had to run 😂

[@cjaybillions]

Supposedly the brand new 2020 Tacoma has the same suspension setup as our 4runners. It has TRD off-road goodies that work on our trucks, like brand new upper control arms and I think even the lower control arms are compatible.

[@CanadianGearhead]

That's the great thing about this platform. Lots of stuff is interchangeable. I've even seen some people swap TRD Pro suspension from a 5th gen without needing to customize much.

[@mjotrainbrain]

Yes those parts are largely interchangeable, but unless you're getting them for a steal I wouldn't recommend. The shocks are really the only upgrade but they're not actually all that fancy

[@omarshanab5087]

Great mods man, have fun

[@trevorjaster4072]

Whoa i didnt know the headers were that good! My headers are cracked and rusty and i want a good sounding exhaust

[@rameylewis7730]

Great video again. I like it that you keep the mods low profile so your rig doesn't look like a mall crawler. I'm doing the same with my 4th gen, but I'm going to add a winch to the front. There's ways to keep it hidden as well. I was wondering why you haven't added one to your 4th gen? Keep the videos coming!!!!

[@CanadianGearhead]

I've thought about doing a Coastal Offroad bumper and a winch in the future

[@lelandnunez6945]

I have a 2003 and honestly i think upgrading the tires and suspension is the best thing to do. There is an eibach rear coil that is amazing for the price and pair it with a bilstien 5300 series that work phenomenally (about a 1.5” lift, and I went with King Coilovers up front but there are much cheaper options that will do the job (eibach makes a matched set, bothe provide a variable lift but around 2” to 2.25” is the way to go) And i was a BFG all terrain guy for at least 15 years but a few years ago i tried the Goodyear Wrangler Duratrack’s (same as in the video) and they are better in snow/mud and just as on road worthy as the BFG. I think the SPC upper arm for suspension really compliments the suspension and has a ton of adjustment for alignment. The SPC arm i can be grased and i quite and reliable, and most alignment shops are familiar with it. If you do this it will transform your 4th gen into a vehicle you love. I ended up doing a rear diff with an Auburn locker and some fog light upgrades from Baja Designs. But other than that it is all about maintenance! 265,000 miles of perfect performance for my 4runner and I have no reason to look for a newer model and it has served me on countless winter roads, camp sites, dirt roads, fishing trips, exploration trips, and commuting. I couldn’t be happier with the 4.0 V6 that never quits!

[@stew2049]

Man I am so glad there’s a dedicated 4th Gen v8 channel. These things have potential to be pretty badass but it’s kinda publicly hidden lol. The 3rd and 5th get all the spotlight.

[@CanadianGearhead]

I'm surprised there isn't more out there on these but I'll do my best to change that

[@Theyralltakenfu]

Yes, but every time you hear about the 4th Gens, it's always about the V8. Not everyone needs an 8 in their lives, unless you're towing etc.

[@erikalvarez4516]

I'm in the market for a 4th gen. (Man look at me already talking the lingo) I will for sure be subscribing and watching your vids for tips and advice.

[@CanadianGearhead]

Make sure to check out the 4runner buyers guide on my website!

[@InteractiveMail]

@@CanadianGearhead I referred to your guide frequently and scored an awesome 4th Gen recently!

[@criticalpanda6172]

Kanati Trail Hogs are essentially duratracs. I got a set of 31.5s for under $600. And theyre 10 ply LT and studdable. Best tires ive owned.

[@Grey86]

Worth mentioning Cat back exhaust as well. Pretty cheap mod and let's that V8 flow nicely.

[@CanadianGearhead]

I love my Gibson exhaust but I didn't mention it because the louder sound isn't for everyone

[@Grey86]

@@CanadianGearhead It needs it to even sound like a V8 in my opinion. I went with Magnaflow and I'm very pleased.

[@Grey86]

@@CanadianGearheadI did all new front end components couple years ago, same route as you with LCAs.. bushings are shot and ball joint boots torn.. I'm getting Moog BJs and Energy Polyurethane bushings. Check it out

[@dadgarage7966]

The Gibson exhaust is loud and drones.

[@craighealeyactormodelpubli3449]

I added the same light bar and love it. Got all new LED lights, even on the runners, license plate etc. Removed all my chrome, 2 " lift kit, new 17" rims with larger tires and got windows tinted. Looks like a whole new vehicle. 2008 Grey Toyota 4-runner V8 4.7L 175k Do NOT get wider truck tires! I had to take off the mud flaps and modify the wheel well because tires were rubbing. One thing that is not available is more roof rack options. My question is, Should I get the front, middle or bottom skid plate and/or all three?

[@liammcmahoniscool]

Sweet channel. Cheers from NC

[@jaemeymatherly7598]

Great videos brother.

[@rpmautoreviews9249]

I did some off-roading with a group here in Ontario when I had my 2011 Santa fe.. ya, I said Santa fe.. haha.. besides the ground clearance issue, it has locking center diff and was great thru tough areas and up steep hills, no problems.. as long as I could avoid bottoming out... Had Mickey Thompson STZ on it.. .. Now have a Kia Stinger and no Off roading for it.. ha..

[@HannibalACP82]

Shopping 4th gen V8 Limiteds right now. Doing as much research as I can. Had a Toyota Fortuner for 2 years and then a Land Cruiser Prado for another year while overseas and I miss them!

[@HannibalACP82]

Biggest open question is whether I should seek out a model with the rear air suspension or not. Originally was leaning towards it but some more research seems to point against it due to sensor failure and subsequent replacement costs. Your 4runner seems to have it as indicated by the switches in the center console between the heated seat switches. Any thoughts?

[@CanadianGearhead]

Mine had it but I chose to swap to coils when I lifted it due to a leaky bag

[@HannibalACP82]

Canadian Gearhead Thanks! Leaning towards a GX470 right now just because of what’s available on the market here in Utah. Either way can’t go wrong!

[@miguelsalami]

Wow great vid I was taking a dump while watching it and OH Man did it ever clear up sum things 🤓👍❤❗🇺🇸

[@Dino-sx9ct]

I'm watching it while eating.. Thx

[@TheTooGrayson]

Also watching while dumping

[@kohootah]

Also watched while taking the browns to the super bowl! 🤣

[@TrailnTriggerTV]

Great video to dump to

[@aaronblanco141]

Gonna watch this a little later when I need to dump, I’m NOT gonna break the chain.

[@kketcham199]

I love your runner! I’ve got an 05 v6 with a two inch lift and have the same rims with falcon tires. I’ve been so stuck on rebuilding my whole front end but I think I might go with Fox for my suspension after watching your videos

[@CanadianGearhead]

I've been really happy with this setup so far

[@duperfastEUC]

I got toytec for my 04 runner

[@Medickep]

Hey, I really like your videos! And you seem to take real good care of your forerunner. I have a 2008 Toyota forerunner sport with 190,000 miles and just got done putting a king‘s suspension lift on it I was curious of what other considerations I might make regarding the lift. I’ve replaced the outer tie rods. I’ve ordered a riser for the back sway bar, and I’m contemplating getting extended control arm links as mine seem worn out as well. Anything else you did in regards to your suspension lift?

[@supersymun]

Subbed! Just my 2010 SR5 in Feb... bought tires in 2 weeks... needed those snowflake rated ATs from Falken to feel stable on snow and wax and trim treatment is just regular maintenance. Looking at a lift, but debating if I wanna bother with a level or bite the bullet for new suspension. I’m hoping to go in order - maxxtrax, susp, rack, winch/bumper, skid plate... with a possible garage build somewhere during a remortgage. If your in eastern Ontario, feel free to reach out!

[@hunter4150]

Just got my 4th gen and looking to lift her up a bit. The struts were replaced 15k miles ago. If it was you, would you still delete the xreas and go with bilsteins or something similar or just go spacer lift since the struts are basically new. Love the channel keep the videos coming!

[@CanadianGearhead]

It depends on whether you're happy with the factory ride or not. If you are, sticking with the xreas and doing a spacer lift would be fine

[@veronicaserrato9827]

Hi love your Toyota 4Runner v8 I had a 2003 Toyota 4Runner and sold it to my sister and she still has it it’s been maybe like 11 years and she tells me she’s still going! I think 🤔 I should of kept it .. but she’s keep good care of her she loves it .

[@philiptaylor2567]

I’m in the market for a 4th gen. Haven’t decided between the 4.0 and 4.7 yet. I love both. My brother has an 03 with the 4.7, and man is that a good smooth engine with strong midrange. If you were going to do like 90% road driving and only 10% off road, would you keep the stock suspension for handling and comfort? I read what people say when they add aftermarket suspension. But I wonder if any of the aftermarket options really “improve” the ride quality, for on road driving?

[@CanadianGearhead]

My Fox 2.0 setup is a bit firmer than stock - I'd say it corners better but also swallows harsh impacts much smoother if that makes any sense. Overall it rides nicer on road

[@julieloudon7513]

Thanks for this. So I take it you didn't raise up the back with some coil caps/spacers? Are the Fox coil-overs stock height? And did you have to modify the fender wells? And aside from the wiggling, are you happy with where the light is mounted? That seems like a cool spot for it.

[@pauln361]

What kind of body hacking did you need to do to get those 285/70's to fit without rubbing?

[@CanadianGearhead]

I have a vid on my channel

[@MrMusicweekly]

Fun fact, I was shopping for a prius for my wife prior to shopping for this for myself ;)

[@Chriisfinegan]

4th gen is the way!

[@marinolopez4850]

this vid was helpful while i was taking a shit👍🏽 good looking out gear head

[@Grey86]

I have the SPC UCA's and they've been good to me. I went with cheaper LCA's though and I'm pretty sure the bushings are shot already.

[@johnblaze6516]

Were the SPC cam bolts the issue? I am doing my LCA and I will be using SPC cam bolts.

[@CanadianGearhead]

I haven't had a chance to take a good look at it yet but by design, they seem pretty prone to developing play

[@amattsrsky4397]

Hi, love your 'runner. Do you mind if I ask what manufacturer and style your rims are? Apologies if it's been mentioned previously. Thanks

[@CanadianGearhead]

They're 17" Method Standards

[@schang0731]

WOW.I want to get one but they are so expensive till this day 2020 despite the fact that this car have been in thr market for over 13~14 years.

[@Mynameisnottrevor]

Yup. Just paid 7k for a 2004 4wd, V6 sport edition with 197k miles. Expensive but worth every penny!

[@calvinneill4073]

@@Mynameisnottrevor I got a 2008 187000 mile one for 6k a few months ago

[@missravenbellewhatthehell]

You get what you pay for though, especially if you can find one that been kept really well with low miles steal it up

[@greeenteeee]

How does the rack led bar set back like that do vs the grill led bar?

[@cameronspringer1323]

Hi, really want that Fox 2.0 suspension but when I click the link on your website, the Amazon page doesn't have them in stock. Is there an updated place that I can purchase these?

[@CanadianGearhead]

Yeah it seems like they're out of stock for the 4runner ones, 4wheelparts might have them for you

[@cameronspringer1323]

@@CanadianGearhead I'll check it out, thanks

[@perrydraco1897]

I like your bug shield. What brand is it ? I have been looking for the same style with no luck. Thanks

[@jasongammoh4114]

So glad i'm not the only one watching this video while taking a dump 👍🏼

[@xanman29]

haha , I’m taking one rn

[@johnshipps441]

Great video as always! Are you still running the stock upper control arms or did you have to change them out with the lift? Also, with the tires, did you have to do any cutting to get them to fit?

[@CanadianGearhead]

I've been running stock UCAs since I'm under 3" of lift but I think my ball joints are about to crap the bed. Likely going to upgrade them and raise the ride height a bit while everything is apart. I had to do some trimming to the bumper, push the fender liners forward and remove the mud flaps for the tires

[@johnshipps441]

I must’ve added more than 3” to mine because the steering got more “mushy” and wants to drift at freeway speeds. I still have my stock UCAs and that’s what I heard could happen at 3 or more inches of lift without changing the UCAs. Also, the lift tore one of my CV axle boots so I had to replace it. I haven’t added off-road tires yet cuz the ones I had still had tons of tread left, but I’ll upgrade them when it makes sense. I’d just like to not have to do any cutting if possible. Maybe go a size smaller than yours?

[@CanadianGearhead]

Definitely stay away from 285s if you don't want to trim. UCAs should fix your alignment problem by the sounds of it

[@vanillathrilla2677]

You and I got the exact same setup friend. Same color 4runner too. Been looking at roof rack covers to make it look more aggressive too. Suggestions?

[@daily_pocket_review]

Nice video man! I’m looking to get one of these for off roading and towing purposes. My question is the 4 Wheel drive is different on these, it’s full-time? Is there an option for a 4 Wheel drive low if situations get tricky?

[@CanadianGearhead]

Yes the V8 models are full time with a 4 low option. You can read all about it in this article: canadiangearhead.com/using-your-4wd-system/

[@adrianalejandro8602]

Hey bro your truck is awesome😍 ¿how many inches is it? 🤯

[@drivemyexotic5274]

Good recommendations! I removed the xreas too but installed a "standard" set of Monroe. Then added Daystar 3" leveling kit. Also changed the wheels to a -10 offset and added wildpeak tires. Looks great. My exhaust needed to be replaced so I also went with Gibson sport exhaust. Sounds great! Have done a few other mods that are quick and easy. 4th gen is definitely a great vehicle.

[@JonFox1945]

Are there any carb legal headers for those of us in Cali 😔

[@myraerwinjrcatapangan6399]

Where in Canada are you located? I just purchased DT Headers and im looking for a shop to install them for me. I also saw your frame oiling video, cant seem to find a local shop who does that... Edmonton AB

[@CanadianGearhead]

I'm in Ontario

[@ryanfitzsimmons1943]

Are those vent shades in-channel? Any issues?

[@CanadianGearhead]

No they're stick on ones. No problems at all

[@timothyandrewnielsen]

Good suggestions. I have the same vehicle you have (if that is an 06'). The suspension 100% upgrade it. I went with Bilsteins but I have to admit, it's decent but it's a bouncing ride. If you go over speed bumps with bilsteins you still have to slow down because of how stiff they are. You can hit the speed bump hard but your ass will fly up and you end up looking like you're the hardy boys. Not something my wife enjoys so I have to slow down with those bilsteins still. The good thing about the bilstein 5100s is they do handle great. No nose dive when hard stopping. The actual shock absorption could be better. So if you're here and thinking about getting the Bilstein 5100's, I'd say do with this leaf did and go higher end. Spend 2 grand if you can afford it. You're going to LOVE that ride. I am planning on upgrading the bilstein 5100's I bought next year. Might* go with new tires and rims in 2 years. I also bought those Dough Thorley headers (they're not installed yet) but I will swap them when I change out the exhaust system at the same time. My exhaust pipes look like they could crack anytime now. Anyway. GOOD SUGGESTIONS!

[@CanadianGearhead]

Yeah I think the Fox stuff is worth the bit of extra money. Forgot to mention they're rebuildable too, which might help people that are thinking long term

[@PervertedThang]

I did 6112s/5160s instead of the 5100s. I love the ride, on and off road. And I did it while keeping the RAS. Yes, I know that's almost blasphemy.

[@josev6660]

Hey guys I'm looking at an 07 v6 4runner with 250k miles for 6300. Good deal or should I pass?

[@Nicholas-ut1dw]

Wait what did u say we need to do with our paint? You mean just wax it right?

[@Portcitysteezy]

What size is that light bar bro ?

[@thematrixhasyou3521]

I was interrupted halfway through the video I guess with a Ford Explorer commercial bashing the Toyota 4Runner. LOL

[@JonFox1945]

What's a good suspension kit for off roading in southern California? I have a daily driver my 4runner would be mainly for off road

[@kineticsurf]

I know y'all love to take off the mudflaps to fit the 285s but the amount of crud that packs in is astounding. It will enhance the already advanced rust I see peeking out from under that pretty-clean-on-top 4th gen. First mod should have been a gal. of Fluid Film and a gun to shoot the bottom with, especially inside the frame. Stupid rusty toyota frames.

[@CanadianGearhead]

Oil spraying is already done - I even have a video on it. As for the mud flaps, if you look close you'll see that I trimmed the rears so the inner portion is still providing full protection. This amount of rust is pretty normal for an Ontario vehicle

[@seneca4670]

I'm 16 and currently drive a 4th gen 4runner. I bought and i love it. I'm purchasing a more luxurious car, a range rover HSE 2011. That'll be myt daily driver and the 4 runner will be my fun car. It's amazing!!!

[@dzortizi1]

Great idea. I'm putting money on that whole daily idea for the range won't stick though.

[@seneca4670]

@@dzortizi1 I don't mean to sound arrogant but the expenses won't be too much of an issue for me... but ik what you are getting at

[@dzortizi1]

@@seneca4670 makes sense. I guess I just wouldn't want the added headache.

[@alanpenrose4736]

Heya. I have a 2006 Toyota 4runner with 275k miles on the chassis and frame, and 171k on the engine, transmission, and drivetrain (2007 parts). My engine has the check engine light, VSC Off, VSC TRAC, and traction control light lit up like a Christmas tree on my dash. Also, at very low speeds and at low throttle, this sound from exhaust (I don't know if my cats are shot) is like a high-pitched rattling sound, NOT like a rock bouncing around on youtube videos you'd look up online about shot cats. My O2 sensors are all new and have been replaced WITH spacers on them. I took my car to the local automotive shop, they said to fix this they would need to mess with the exhaust, put new O2 sensors on and take the spacers off, then diagnose from there to see what's wrong. It's going to be expensive from them... I also am wanting to do this myself... I have a mechanic friend that told me that my cats need to be replaced but I'm not so sure it's the problem just yet... Any suggestions? (reposting this on another video to see if there's any other comments... help)

[@CanadianGearhead]

It depends on the diagnostic code you're getting. You could start by removing the spacers to rule that out but if your cats are rattling and you have a code for that, they're probably toast

[@alanpenrose4736]

@@CanadianGearhead These are the codes I have: P0136, - sensor bank 1 and 2, P0136 - transmission, C1201 Abs codes, fuel cap canister purge control solenoid C1340 - Transfer case

[@CanadianGearhead]

@@alanpenrose4736 Not sure why it would be throwing transmission and transfer case codes, that might be unrelated

[@damonaniton]

What is the largest tire you can get but still keep the spare tire in the factory location?

[@CanadianGearhead]

I think a 285 would be pushing it, might be able to fit if it's aired down a bit

[@Mick_A_Knuckle]

I've got a 255/75-17 (32" OD) just barely squeezed under my 4th gen. A 275/70-17 is the same diameter. You won't fit a 285/70-17 (33" OD) under there.

[@rameylewis7730]

@@Mick_A_Knuckle I'm running Toyo Open Country MT's 255/75/17 after I added the Bilstein 5100's. I love the narrow digging tire compared to the wider one for serious off roading. Few people out here get this. Nice job!!!!

[@steveeichelberger806]

The trailer hitch style effects what fits. The V8 hitch is a beefier hitch than the V6 and restricts the size of tire that fits. If you search the Toyota forums, there’s some good info. BTW a 285/70-17 spare did not fit my V8. It would hit my track bar.

[@jackwright3098]

It's all about the 3rd gen!

[@jacobvogdes9477]

Great looking 4Runner! Do you have a link as to how you mounted the roof rack light bar?

[@CanadianGearhead]

I have a video about the light bars on my channel

[@eliguidroz7777]

Hey man are those stock headlights? I’m looking for either a replacement for my old ones or an upgrade. I really like yours and would like to what kind you have

[@CanadianGearhead]

They're just the OEM projectors

[@vwbeetle5578]

Those are great tyres. we call them Dunlop not duramax here in Zambia.

[@rollingtones1]

Great videos! May I make a suggestion? Please buy a $20 tripod at Walmart or Walgreens. It makes for better videos and people that are downloading KZbin videos onto their cell phones, which is 78% of the market, find that the videos load faster when there is less jiggly movement. They can also select a higher resolution version of your videos.

[@vintagerevival391]

What led bar are you running in the front grill?

[@blancoz9000]

Hello guys, I'm thinking on buying a Land Cruiser 200 series or a 4 runner like this on a video. Wich ine should I choose in terms of off-road relatability?!

[@CanadianGearhead]

Land Cruiser is likely built a bit better, 4runner is smaller and can fit on tighter trails

[@rameylewis7730]

I have both a 4th gen and a 200 series and my 4th gen is better for 4x4ing because it is lighter, narrower, and easy to mod. For regular driving and comfort, the 200 kicks butt.

[@peytonfristoe2694]

I love the set up! I currently have a 4th gen that I painted quicksand like some of the newer 4Runners. I have plastidiped wheels, grille, and emblems. My issue is I have some aggressive off-road tires but they are only 265/65/17 and I feel like if I lifted it, that it would look bad. I feel like a lift with tires that small would look goofy. Any suggestions???

[@danny8739]

I just lifted my 4runner 3 inches and I'm still on stock tires... About to get 265/70/17 though but yeah it does look funny but I wear it with confidence because I'm a broke college student and the lift looks good other then the small ass tires. It's fine for now dude don't worry really. But if you got the money get the right after the lift.

[@CanadianGearhead]

It might look silly on some vehicles but I think the 4runner can pull the look off better than others

[@peytonfristoe2694]

Canadian Gearhead do you think a 2 inch lift would look good on 265/65/17 size tires? I wish I could see what it would look like before I buy the lift.

[@peytonfristoe2694]

danny the only issue is right when I got it, i got the stock tires in a aggressive off-road tread so I’m not due for tire for a while. I might try to get a 2 inch rough country lift. Hopefully it looks good.

[@Mick_A_Knuckle]

Yes, it'd look goofy with 265/65-17. 265/70-17 (31.5 OD) look good with a 2 inch lift, but IMO 275/70-17s are 32" OD and are just right.

[@ckong46]

What color is that runner? Shadow mica?

[@CanadianGearhead]

Yup, you got it

[@rhodycars6058]

4th gen vids 4lyfe

[@gojiman1649]

What's the biggest tire you can get without a lift?

[@michaelsheppard8371]

what size lift and tires?

[@CanadianGearhead]

285/70/17, a bit over 2" upfront and 2" in the rear

[@Libunaop]

how many kms now on it?

[@sgtwizzleteats4130]

I finally have my hands on one. It’s an 05 V6 which is okay, but thankfully it has the five speed and not the four. Want to upgrade a few things on her and eventually get a V8 model. Nice vids by the way CG.

[@autostationfanatic]

I have an 09 and v6 as well loving it so far.

[@tigergreg8]

You really don’t need the 8 unless you plan on towing. The 6 is a great engine if taken care of.

[@seanbosworth123]

I want to put a light in that same location on the bumper. I’m having trouble taking off the lower grill insert. How were you able to do it?

[@CanadianGearhead]

If you have an 03-05 model I believe the grill is part of the bumper. You'll need to cut it off. It just unclips on the facelifted models like mine

[@seanbosworth123]

Canadian Gearhead thank you! That’s what I was figuring I’d have to do.

[@garretpayne7308]

So what kind of lift kit is it?

[@colossus2828]

do you have long tube or short tube headers

[@CanadianGearhead]

Short tube

[@GoinAllOut]

I love my '07 my only regret was not getting a 4wd... Do you guys think it's still worth putting a roof tent and tires on it?

[@CanadianGearhead]

If you get stuck in the mud, at least you can live in your tent until someone comes to rescue you haha

[@dominiquestephenson195]

Get a plate front bumper and at least a 10k lb winch, least that way u can get unstuck. Other than that have fun. It’s still a damn good truck for over landing.

[@davidryan7981]

If it's worth it to you, do it. On the other hand if you're gonna always second guess not having a 4wd, just sell it and get a 4wd. If you don't really need the 4wd, then don't worry about it and just enjoy your vehicle.

[@Theyralltakenfu]

If you live in a climate that never requires a 4WD, then why sweat it, just do the mods you want. You were smart enough to buy a 4Runner, I'm guessing you know how and where to drive it without getting stuck and having issues. Have fun.

[@jameskocks4734]

I bought one with 2wd and the V8. No it doesn't have 4wd. It doesn't have rust either. If you don't need it it's a waste of money. A good set of tires and you'll be fine.

[@KAShuACE_8807]

Did you paint you emblem and 4runner decal

[@CanadianGearhead]

Previous owner plasti dipped them

[@901gtg]

if i’m wanting to get mine repainted, what color would you recommend to be like yours

[@CanadianGearhead]

Shadow Grey Mica

[@cblackmail]

What year and model is it? Thanks

[@CanadianGearhead]

2007 Limited

[@stovallholmes3060]

I that 4runner runner black or, is it the charcoal grey color?

[@CanadianGearhead]

Shadow Grey

[@maxzuschinoutdoors4868]

I bought my V8 runner used and it didn't have the V8 badge.... is there anywhere I could buy one?

[@CanadianGearhead]

Dealership or junkyard

[@craighealeyactormodelpubli3449]

I took off all my chrome lettering. How are you defining V8 badge?

[@chipsmydog]

Hold the camera steady, please.

[@InteractiveMail]

Do you have access to any Canadian Bug Deflectors? I would love one for my new V8 4R

[@CanadianGearhead]

I've never looked into it

[@SaifKhan-mz5hz]

How is the towing package and or capability

[@nickterrero1488]

I’m looking to buy one of these as a first car, do you recommend a V6 or a V8?

[@CanadianGearhead]

You can't go wrong with either option

[@bena1549]

No really a huge difference unless you need to tow. V6 will just get a tad better fuel economy and you don’t have to worry about the timing belt on the V8

[@rhodycars6058]

Do the Doug headers do anything to take care of the secondary AIR system and the block off plates?

[@CanadianGearhead]

They have the tubes for the air injection just like the OEM manifolds

[@thegaminingboom6439]

How did you mount that top light bar?

[@CanadianGearhead]

I have a video explaining the lighting setup