Best Electric Stick Screwdriver

[@LubomirDohnal]

Thanks from the Czech Republic! Long live USA! 👍

[@Tools-Tested]

No problem! Thanks for the support!

[@MegaSmalex]

Прогиб засчитан. Молодец!

[@naezro]

Vessel, because it fits in my screwdriver slot on my tool pouch. I can use it all day without charging. It has enough power to run 6/32, 8/32 screws and small nuts and bolts. It feels the most like a regular screwdriver. Highly recommend if youre in electrical, HVAC, or Maintenance.

[@Tools-Tested]

Yeah it's a solid choice for sure, depending on application.

[@chazparker2488]

Same love my vessel, and build quality

[@kchiem]

@@Tools-Tested I think the focus on these should be on usability, not on how much power/torque they can drive a screw with. These are labor savers over standard screwdrivers, so all they need to do is to be able to drive a screw with reasonable torque into pre-threaded material and save the repetition needed with a standard screwdriver, and also have a locking clutch so you can manually tighten at the end. How well they fit in the hand, how they handle relative to a normal screwdriver, their battery life, and how durable they are--like can they survive being dropped from ceiling height?--should be how they're judged.

[@ric8868]

I have the vessel. I got it because I needed some JIS bits, their bits are amazing and after buying a lot of them, made sense to buy the screwdriver. Mine has no speed control, and enough torque to mess things up. I use it mostly to undo the screws of electronic devices, some have dozens, saves a lot of time. I like that it feels like a normal screwdriver and is small. I ended up developing a technique to stop the motor before it torques it and finish by hand. The battery lasts forever and feels very well made.

[@BluTrollPro]

Bit of a niche case but, the Vessel Ball style handle is also excellent for folk with mobility issues. My mum is an avid DIYer, I bought her one a year or so back when she was complaining to me about not being able to use a regular screwdriver, or be able to handle the impact I was lending her due to worsening arthritis. She tried a Bosch, essentially a rebrand of the Dremel, and just couldn’t get her head around the pressure activation then I bought her the Vessel which she’s loved. Usage case is mostly driving in drywall fixing and small wood screws for putting nik naks up on walls.

[@Tools-Tested]

Yeah it really depends on the application and form factor. It’s good to hear the Vessel solved the issue.

[@TrevinKremis]

Bosch owns Dremel

[@mnmn1665]

Excellent test. Thanks. I have a 25-year old B&D pivoting stick with a 25 position clutch. Still going strong.

[@Tools-Tested]

Thanks! Glad you liked it. B&D made some solid tools back in the day.

[@astridsactionrc545]

Pivot Driver. I have the Craftsman version. Still kicking.

[@astridsactionrc545]

I still have my Craftsman Pivot Driver and Black & Decker versapak screwdrivers. Both over 20 years old. Still going strong. Zero complaints.

[@Tools-Tested]

Nice! I have the B&D versapak somewhere....

[@jumper233]

Found that Dremel on discount at Home Depot for $17 so I bought 2.I already had the Amazon basics(denali) one they're both great little tools.

[@Tools-Tested]

Nice, that was a good deal.

[@User_not_found_403]

I got the Fantik from Costco. Love it. Love the array of bits and its the only one that has USB-C charging.

[@Tools-Tested]

Nice, yeah seems to be a nice setup.

[@mattc7270]

I have a different model Vessel (220USB-1U) and the Dremel. I usually reach for the Vessel since most of my needs are low torque and it feels better to the hand. I love the Dremel for hard to reach spaces Or needing to keep a more stable grip for torque because you only have to push to activate it.

[@Tools-Tested]

Yeah that sounds like a good setup giving you the best of both worlds.

[@renurenovationsllc7780]

Your killing it with that dyno. I love the max torque reading. The watts output is like horsepower, work done over time, but the max torque tells how tight you can turn a screw, and what will drive the longest wood screws. On TTC the Dewalt did much lower then the Amazon Basics, the Basics is fast, but the Dewalt is more torquey. Can you test any 8volt models. Also want to see the new M18 saw, with the 12.0 Forge Battery.

[@Tools-Tested]

Thanks! Yeah I plan on doing the 8v in a month or so. Its also in the works to test circular saws next year but probably won’t happen until June ish at this point. I still need to adapt them to the dyno.

[@three-phase562]

Pretty impressive performance from that Amazon Basic, available for less than £20 over here, looks to be quite a few clones of it as well. The Bosch Go driver is popular over here, but is 3 times the price of the Amazon. Great comparison video 👍👍

[@Tools-Tested]

Yeah its crazy how well the Amazon Basic performed, thanks!

[@grumpyz0mbie]

I've been using the Bosch Go at work for the last couple of years. It's basically exactly the same as the Dremel. Today, I got the Amazon basic for use at home..... and I absolutely hate it. Stats don't tell the whole story. It has plenty of guts, but is just horrible to use compared to the Bosch/Dremel.

[@grumpyz0mbie]

Having used both, I would say, without a doubt, that the Bosch is worth the extra. If you've never had an electric screwdriver before and can't justify the extra price, then you'll be happy with the Amazon... but it's just a pig to use by comparison. I'm using it to tighten M6 hex head stuff. The main issue is that there's a 4 to 5 second delay after each fastener is tightened down. The lights flash to indicate... something?.... and you cannot use the tool again until they stop. This is horrible, annoying design. The second thing that makes the Bosch a far more ergonomic tool to use, is the push activation. Seems weird at first... but once you get used to it, you wouldn't want to lose that feature

[@NWGR]

That amazon basics is hard to beat for the price. Thanks for the review and comparison!

[@Tools-Tested]

Yeah it really is, no problem!

[@greymoor9335]

I was lucky to find the Fanttik for 40 at Costco. Good to see how it compares and I can't complain

[@Tools-Tested]

Nice!

[@fuloplehel]

Great video and testing. I have the bosch version of the Dremel one, and a few days ago I purchased the gen 3 also from bosch. They made some changes, led light on the front, locking bit holder, and USB C charging, and more positions on the clutch,but no charger anymore. But I think the other specs are exactly the same. I do electrical work, and I like it, because it's powerful, and the mechanical clutch is very convenient. 👍👍👍

[@Tools-Tested]

Thanks, I'm hoping to get the gen 3, sadly it isn't out yet in the US.

[@tgsparkyoriginal]

I’ve had the Worx you tested and the new Worx and I love them BUT I always go back the the Vessel as it fits in my Sparky pouch better. Most of the time the power I need is just to crack the screw loose which I can do with my hand.

[@Tools-Tested]

Yeah I see that, the Vessel is very compact.

[@Ender_Wiggin]

New worx with a clutch is even better.

[@Tools-Tested]

Yeah I just imported in from china, sadly no one sells it in the US yet......

[@Kosher3864]

I really do appreciate your videos and video style, always very well organized and thought out testing and summary of results. Thanks for doing what you're doing!

[@Tools-Tested]

Glad you enjoy the videos! No problem!

[@chazparker2488]

I was gunna get the Amazon basics just to have another, however I love my vessel. Feels great in the hands, locking collet, ergonomic, and build quality. Love the vid I knew Amazon was gunna crush with the rebranded Denali

[@Tools-Tested]

Yeah, the build quality really stands out on the Vessel.

[@sapelesteve]

Just found your channel. Great testing of those tools! You have a new sub!! 👍👍

[@Tools-Tested]

Appreciate the sub! Glad you enjoyed the testing!

[@kylefowler5082]

Awesome video as always, would love to see pistol style screwdrivers tested next!

[@Tools-Tested]

Thanks! Yeah hopefully in a month or so.

[@mtyota]

I've had the Dremel for about a year. It's held up to abuse, battery life is good. I usually leave it at the max and lower it as its losing battery. You can squeeze extra life that way.

[@Tools-Tested]

Nice, yeah seems like a quality screwdriver.

[@dearbulls]

I think I got the Worx for about 20ish when it was on sale at Sam's club. The result surprises me since I saw the Fantic at Costco seller for even more (after rebate)

[@Tools-Tested]

You've got a good deal!

[@mrbigberd]

The Dremel is already a generation old. The Bosch Go 3 moves from 1.5 to 2ah battery and slightly increases max RPM up to around 400rpm. I'd guess the larger battery means it has slightly more torque too.

[@robertalien1607]

And. it's smaller, has 2 lights and uses a USB C charging port.

[@Tools-Tested]

Yeah Bosch hates the US, I will have to import the Go 3.

[@decline1129]

Just ordered the Bosch go 3 through a Japanese import proxy. Cannot wait to use it

[@HTP_]

That Dremel model looks identical to my Bosch Pro

[@michaela3330]

Love your videos ! Every time i enjoy it so much!

[@Tools-Tested]

Glad to hear it! I appreciate that!

[@james2042]

I have the new ryobi usb lithium installation driver. Not quite as small as these unfortunately, but with the 3 heads it's does quite well of getting into every little crevice. Also a fixed speed, but when it comes to driving small screws I haven't had an issue

[@Tools-Tested]

Hopefully I will be tested that one within the next month or so. Thanks for the info!

[@HenningLangheim]

8:59 the Dremel is the same as the Bosch GO 👍🏻

[@Tools-Tested]

Yeah hopefully we see the G0 3 in a Dremel version.

[@2amRendezvous]

That Dremel/Bosch should be in everyone’s house. Heck buy 2 for the garage.

[@Tools-Tested]

Yeah I was shocked.

[@MonkeyBoyStudio]

Have the old Bosch one and new one. Prefer the old as has more torque. But used so much the batteries on the way out.

[@kitchtangov]

I heeded your advice and grabbed two Dremels after owning the Ryobi.

[@UNgineering]

have you tried gyroscopic screwdrivers? where you control the torque/speed by twisting the screwdriver? from what I hear they're much more user-friendly than the button-type

[@Tools-Tested]

Yeah I have the Dewalt pistol grip version, hopefully I can test it in a month or so!

[@beemer567]

i like my little vessel screwdriver but it does have real power limitations. It's still great because it's like a normal screwdriver with a thread runner feature for no additional size.

[@Tools-Tested]

Yep, really depends on application and form factor.

[@RyldUp-uo3pc]

Helpful video, just about to buy a vessel. Keep seeing it in tool videos but all guys that are very obviously sponsored so nice to see it compared to other brands. Might as well spend half the cash and get a amazon driver

[@Tools-Tested]

Yep, looks like they are pushing it pretty hard. Glad you found the video useful!

[@MrEuph714]

I have the Denali looks exactly like the Amazon basics. I only got it because of the TTC and has a case like the worx. Was a great deal for only $20 when I got it.

[@Tools-Tested]

Yeah it’s a powerful screwdriver for the $

[@stevencamacho8742]

I have both the Dremel and the Skil. The Skil is only $30 now everywhere. The Dremel definitely has more power and speed, but the articulating head on the skill has shown to be more versatile in the field and more durable. The Dremel from time to time would not operate correctly. Sometimes it would just spin on its own and seem to lock itself off. So, the Dremel stays at home for the house and the Skil goes in my tool backpack.

[@Tools-Tested]

Interesting, thanks for the info!

[@pokemountain518]

I got the same Worx with a 12” flex neck and 30+ bits plus case and usb to usb C on sale at Sam’s Club for 20$ if they have any left in stock great buy.

[@pokemountain518]

It’s not on sale anymore it’s back to 29.99$

[@Tools-Tested]

Yeah that was a good buy.

[@spyghetti]

I have the Worx and I have used it for at least two years if not longer and it's been pretty good no issues at all I like the case because I store extra screws in it for small projects, I've always been intrigued by the Vessel but I don't know about that forward and reverse button it looks tiny and like garbage but I know it's a JP product, I'd probably use it a lot as I work on a lot of small industrial equipment and I don't use the Worx on job sites it was for home projects.

[@Tools-Tested]

Yeah I think the Vessel would work well on small equipment.

[@Gooch072]

I own several dewalt screw drivers, an amazon basics screw driver and a Hercules 12v screw driver. I use the Hercules for tougher jobs, but it is just a bit smaller drill/driver or a impact without the hammer. I have 3 of the Dewalt with the gyroscopic drive, which I love, and the one you featured in the video, I like the collar activation on it, as it is easy to use. I mostly have it for working on or building computers. Lastly, I own the amazon basics screw driver, also featured, but I haven't even opened it yet, but after watching your video, I am going to have to open it up and try it out. Thanks for the video. I just subed.

[@Tools-Tested]

No problem! thanks for the sub! Im hoping to test the dewalt with the gyro soon.

[@coryulrich6489]

I love these videos.

[@Tools-Tested]

Thanks!

[@southsidetom]

I prefer a mechanical bit holder vs the magnetic. Currently using a Vessel knock off. It's very good for assembly/ disassembly duties. Same dimensions as Vessel. Great vid!!

[@Tools-Tested]

Interesting I seen the knock off and almost bought one. Thanks!

[@SirKayTravels]

What are the specs of the knockoff, the same? or it's only aesthetics?

[@luisfloriano8643]

I have both Fanttik and Amazon Basic ... ( got the Fanttik at Costco - for like $50) .. in term of torque it blow the Amazon Basic out of the water. Sure you had in on mode 3. I was using the basic day in and day out .. till I got the Fanttik.

[@Tools-Tested]

Fanattik was on 3 and won the dynamic torque test well past the AB. But yeah it was surprising the AB ranked above while testing against a hard joint.

[@Omnis2]

The Denali aka amazon basics one was $8 when I got mine, or like $15 with the huge bit kit. Unbeatable.

[@Tools-Tested]

Yeah u can’t beat that!

[@TheCvp33]

I went with the Harbor Freight drivers for $15. I also like that they can convert to a 90* pistol style driver.

[@Tools-Tested]

Im hoping to test the Bauer version within a month or so.

[@boosted2.4_sky]

I've got the Amazon (SKIL) Denali..it's damn good..I can't lie..I have the Craftsman newer model..and I always grab the Denali 👍

[@Tools-Tested]

Yeah its powerful for the $ and size.

[@nizamettinakkoyun571]

this is worx old model wx240 new model worx wx242 is more powerful and compact than all these I did all the repair and installation work in my house with this device, I highly recommend it.

[@mondo_stunts27]

The vessel comes with a JIS but it’s slightly different to a Phillips bit but can be used in Phillips or pozidriv head screws.

[@medman36]

Nice overview. I've owned the worx screw driver for a little while. I was more curious about how the insides worked than real world functional performance. I liked the form factor. Mechanics i side are not very sophistcated. I found performance to still be a little overpowered and I missed an anti kickback function. I think what I've learned with all electric screw drivers in this video and my worx is that they are a great addition as a go go to electric and manual screwdriver in one. It helps reduce strain imjuries with intensive and repetitive taks. What I miss with most of these screw drivers today is that the functionality and features are too limited. I think the perfect electric screw driver in this class is a combi pistol to barrel grip conversion model with a 4-8 V power output. The power can be dialed in for little torc for microelectronics to full power for more demanding fastner screwing amd umscrewing and allowing easy screwing of fastners into hardwood. For home and shop use. The battery is a 4-8 V removable battwry, similarbto what Ryobi amd Milwaukee has. It would be nice if it has a gyro system like the DeWalt has. Everything in a small forfactor that is not too.big and bulky in the hand but has a firm grip. And the electric screw can be used offline in manual mode by screwing in in screws with a ratchet system and no play in the mechanics (a solid feeling ratcheting and no loosness when turning). Charging over usb c on the screwdriver for emergencies and all else remove the lithium battery for external charging as I can uae the battwry for other tools and tasks as I ezpect I won't need to use the screwdriver all the time. I think if one of the tool comapnies can make an all in one perfect versatile single usefull screwdriver and a more versatile use of the battery for other tool or charging applications. I think that would be the perfect electric screwdriver tool. For my worx I would have liked to see a removable battery platform, more torc settings for screwing and hardwood and microelectronics settings and a kickback system to prevent strain injury. With the worx have an adjustable barrel to pistoolgrip system for better ergonomics on certain jobs with fastners. And for microelectronics also have a pencil grip for easier overhand application on microelectronics screws. And lastly have a brushless motor for more finer motor control on microelectronics and more torque umph and finer motor control in more delicate fastner applications.

[@Tools-Tested]

Im hoping to test the barrel grip style with removable batteries soon, im really curios about the gyro in the dewalt.

[@BeefIngot]

Would love it if these had clutches, usb c and a individual buttons for clockwise and counter clockwise rather than pushing. I reckon the Bosch Flexiclick is the best allrounder till then

[@Tools-Tested]

Yeah the bosch go 3 or new worx 242 checks some of those boxes.

[@thomasyung9162]

Another great review! Consider reviewing the Ryboi USB Lithium screw driver. Thanks!

[@Tools-Tested]

I have one on my list. Thanks! Glad you liked it!

[@NO_OPEC_NO_PROBLEM]

Dremel needs to get past 2014 and get a USB-C

[@Tools-Tested]

Yeah Bosch apparently already fix this with a gen 3, but of course it’s not in the US yet. Only can be imported through eBay and Aliexpress.

[@jthatguys]

Started with the Amazon model and moved up to the Dremel. I like them both. You could ask for more torque, but in reality, in a true screwdriver configuration, it’s easy to tweak your wrist with these bigger better models. Also, none of them have batteries that are easily replaced, making all of them disposable. So are any of them going to be in your toolbox after a couple of years?

[@Tools-Tested]

It's the best of both worlds having both of them. Yeah it's hard to say how long they will last, they are basically a throw away tool because of that built in battery.

[@imhogar]

Cool i have Bosch same as this dremel

[@rubenakacoolerlid2314]

I use the worx electric screwdriver daily, i like it. I wish I could lock out the trigger. It turns on in my tool bag, and the trigger is pressed on

[@Tools-Tested]

I ordered the next Gen Worx which looks to have a on off button and a mechanical clutch. Sadly its no in the US yet, I had to order it from China.

[@Ender_Wiggin]

@@Tools-Tested I was about to say the worx wx242 has a dedicated power switch for this exact reason.

[@MrCubflyer]

Max torque doesn't mean much in these little screwdrivers it's much more important ho they function ,I personally use the dewalt gyro because it can be used in pistol grip and straight, it's very convenient.

[@Tools-Tested]

Im hoping to test the dewalt gyro soon.

[@charleschapman2428]

I have the amazon and its really powerfull but the postion of the switch being in the middle of the tool makes it difficult in some positions. The dewalt with the switch on the front collar looks like it would be easy to activate with just your thumb but the price is ridiculous. The push on switch on the dremel is something that I might have to look into. Thanks for the video.

[@Tools-Tested]

Yeah I can see that with the Amazon. I agree the dewalt is overpriced. The dremel shocked me, apparently Bosch already has a gen 3 we don’t have in the US.

[@decline1129]

I’ve owned the Mac Tools, Vessel, Denali, and my current favorite is the Kobalt. No locking collet is the biggest downside of the Denali. Not a fan of the slide control on the Vessel. Kobalt is my favorite because it is very similar to the Mac Tools, but the Mac was very weak and broke on me.

[@decline1129]

I use mine daily with a 3/8 hex bit on the end to open Medeco plug locks at a few businesses I own.

[@Tools-Tested]

I will have to check out the kobalt, thanks for the info!

[@Leon-159]

Well, That Worx can be bought as Ferm for 56PLN (around 14$) in Poland. With only 5 bits, but still.

[@Tools-Tested]

Interesting, thanks for the info.

[@Soandsoguy]

The fact that the Dremel/Bosch is microusb is a deal breaker for me. I would buy the Fanttik. Also I think speed should have been tested as the ability to drive a small screw quickly is a common requirement for these, more so than torque probably. For speed, the Dewalt and Dremel are rated at 360 rpm. The Fanttik is only rated at 220 rpm. The worx is in between those numbers.

[@slinkytrips]

That's actually the old Dremel/Bosch model, the new gen 3 has been out for a while (maybe not in the states) they added USC C, locking collet and LED lights to it compared to the gen 2.

[@7x779]

Yes that was a big fail on this video not comparing speeds or even mentioning it. Of course a screwdriver that's geared lower is going to have more torque and use less current per torque. And the other hand a high torque low RPM driver is not going to have enough speed to run a self-tapping screw in

[@Tools-Tested]

Yeah usb micro is a letdown, we don’t have the gen 3 yet, Bosch seems to hate the US. Rpm’s are on the table.

[@slinkytrips]

@@Tools-Tested They seem to rebrand a lot of their stuff for the US market as well like with Diablo bits. It makes sense though as the US market does prefer their American brands so it's a tough market for them to break into.

[@bback74]

Ordered a Bosch Pro Go Gen 3. Think it was released this year. Not that expensive here in Europe compared to other premium brands. Bosch have owned Dremel since the 90s so I doubt I go wrong here.

[@Tools-Tested]

Nice, yeah I didn’t even know about the gen 3, but typical Bosch, we probably won’t officially see it in the US for another year.

[@delliott777]

Which of these are variable speed? Do you have a list with features such as variable speed? Nicely done!

[@Kosher3864]

Have you already done a video showing the older style Dewalt screwdriver, the one with gyro controls?

[@Tools-Tested]

No not yet, it will be with the folding versions in a month or so.

[@domenicfp]

Great Video and Thank you. Can you include the older "Metabo HPT Cordless Screwdriver Set, 3.6V", I bought it after see the Milwaukee M4 Li-Ion Electric Hex Screwdriver Kit being extremely expensive. I owned the ni-cd battery version. 30+ years ago, Panasonic and Hitachi (Metbo now) used to sell them as well. God Bless you and the family, and Merry Christmas.

[@Tools-Tested]

Thanks! No problem! Yeah I'm hoping to test it along side the dewalt, Milwaukee, Panasonic and ryobi with removable battery. God bless you and your family as well, Merry Christmas!

[@СергейСуренщиков]

Thanks! Interesting! But Works 242 is missing from the list, it is newer.

[@DavidLee-cw6ci]

12v drills and impacts have come along so far, aren't much bigger or heavier, and you can drill and drive screws with either. I'd save up for one of those.

[@NeilPho]

You need to test those drivers that have a USB-C port to see which ones actually charge from a USB-C charger. Many omit the two resistors necessary to turn on a USB-C charger. I am already carrying a USB-C charger with me, I don't want to have to carry a USB-A one as well.

[@Tools-Tested]

All USB C versions are C-C except the Worx which requires A-C.

[@NeilPho]

@@Tools-Tested Thank you. The Worx was the one I was going for! Not now.

[@Woodkin007]

Why no bosch go 3?

[@Tools-Tested]

Will get it on order, isn't available in the US just like the 18v 8ah+ tabless battery...

[@toolscientist]

Damn, some of those seem to go to full stall. Hope they can handle the stall current.

[@Tools-Tested]

Yeah I was getting worried and didn’t hold the button long.

[@iangregoryhome]

Had the Bosch Go 2 👎🏻 now have the Hoto 👍🏻

[@Tools-Tested]

Interesting did the Bosch fail?

[@iangregoryhome]

@Tools-Tested No, it's the pushing forward feature I didn't get on with especially in reverse and the power button is in an awkward place whilst gripping the driver.

[@riba2233]

nice, that vessel looks pretty good. btw when you review 8v or 7.2v tools please include both makita versions, they have a regular one with a clutch and a impact version, pretty interesting stuff

[@Tools-Tested]

Will do! The makita is on the list, hopefully in a month or so.

[@bleedingempire]

the Worx is $20 at Sam's Club and has a better case with more attachments than the one in the video!

[@Tools-Tested]

Nice!

[@jamesalles139]

I have an _old_ *Black & Decker* that is, somehow, still turning

[@Tools-Tested]

Yeah they made some solid tools back in the day.

[@vicever08]

I found push to activate hard to control. I like push or slide to activate much better.

[@Tools-Tested]

Yeah I found it a bit awkward.

[@k1_w3]

@ToolsTested Bosch just came out with the Go 3, which is an updated version of the Dremel with a ring light and locking chuck. It would be a cool one to include in the next round.

[@Tools-Tested]

Will do! Thanks for the info!

[@k1_w3]

@Tools-Tested The Wiha Zai Hause electric screwdriver would be interesting to see in this comparison too. It’s similar in size/price to the Vessel and Craftsman.

[@PNWOutbackxt]

just in case anyone is after the Fanttik, costco has them for $40 until christmas right now

[@Tools-Tested]

Thanks for the info!

[@AntDiy4]

Bosch go gen 3?

[@Tools-Tested]

It's not sold in the US, I have It on order from the UK.

[@unsichtbar08]

When I look at the Dremel model, it is the same design as Bosch

[@Tools-Tested]

Yeah its a copy of the Bosch GO 2

[@ElectroAtletico]

The electric screwdriver formerly known as "Amazon DENALI". Torque beast! p.s. Now known as "Amazon BASICS". Available in a 34-bit set, much better option than both the WORX and the DREMEL for still only $35. BEAST!!!

[@rickoneill4343]

This is the answer.

[@Tools-Tested]

It's great for the price!

[@7x779]

Where is the 7.2 volt Makita and the 7.2 volt gyroscopic dewalt? No mention of RPM? Would be nice to see which ones are capable of running a number 10 5/16 head self-tapping screw into a piece of sheet metal, as is a nice thing to do when you're in HVAC and don't want to take a trip all the way across the roof and down the ladder to get a full size drill or impact

[@Tools-Tested]

The makita and dewalt folding gyro dewalt will be in a separate video, rpm in in the table.

[@npp909]

How about the best..... DeWalt 12 v screwdriver extreme?

[@Tools-Tested]

Hopefully is a few months.

[@emmettturner9452]

I just got the older, discontinued, DeWALT DCF682 on clearance at Lowe’s. Interested in seeing the successor.

[@Tools-Tested]

Interesting I didn't know they discontinued the Dewalt DCF682.

[@emmettturner9452]

Well, I’m guessing based on limited availability, being long-gone at Lowe’s (couldn’t even find with Brick Seek) and the discontinuation of the only other tool that uses 8V Max (DCL023 flashlight). They also released a USB charging 4v cordless electric screwdriver but that certainly isn’t a substitute for the DCF68x range.

[@uvc175]

Check your local Sam’s Club for the Worx on clearance. Found it here for $19.97, includes the case and all the accessories mentioned here.

[@Tools-Tested]

Thanks for the info!

[@dbrandon4528]

I have the workx got it at Sam’s for $30

[@Tools-Tested]

Nice

[@RR-wt5ir]

Top

[@VideoMarketingFiverr]

dremel screwdriver is exactly like my bosch go 2.and its made in malaysia,even in malaysia i can't find single piece of dremel screwdriver..maybe dremel oem from bosch ?

[@Tools-Tested]

Yeah Bosch owns Dremel, the go 2 is the same screwdriver.

[@VideoMarketingFiverr]

@Tools-Tested oh no wonder.maybe its for export only.local shops seems didnt sell lot of dremel.just some dremel rotary tools

[@Tools-Tested]

@ Yeah Bosch is weird like that, using the Dremel name in the US mainly. We don’t have the go 3, I’m guessing it’s going to be released here in a Dremel form.

[@VideoMarketingFiverr]

@@Tools-Tested go 3 released for a year already.I think can get online worldwide

[@Tools-Tested]

@@VideoMarketingFiverr Sadly it has to be imported here through Aliexpress or ebay. No retailer officially sells the go 3 here, Bosch seems to hate the US.

[@Chris-B-Truth]

I prefer the transformer model Ryobi over this whatever the H one.

[@Tools-Tested]

Yeah Im currently testing the Ryobi removable battery version.

[@plsreleasethekraken]

I am always surprised more people don't value that lowest setting being truly low in terms of torque. Having a clutch on a very low torque setting is incredibly valuable for sensitive and small parts. The HOTO, Dremel and Worx are all awesome, but they all fail to reduce their torque or clutch low enough for sensitive stuff which is a big failure in my eyes. I have drills. I have impacts. I do not need a lot of torque, I need a lot of control with some speed. This is where the Amazon Basics excels over all the rest. It has a balanced distribution between its 3 modes. I would weight this factor near the very top and assign much lower weights to many of these other variables.

[@Tools-Tested]

Yep it’s a lot to consider depending on application.

[@plsreleasethekraken]

@@Tools-Tested Thanks for providing the valuable info on the table. That lets people make their own decision with the info you provide.

[@Tools-Tested]

@ Yeah I try and add as much as possible, no problem!

[@donnie017]

No Bauer?

[@Tools-Tested]

They only sell the rotating grip style, it will be in another video with others that are similar.

[@jordaynerjr]

If you get a chance please check out the hyper tough screwdriver sick they have three different models the new ones have type c they're surprisingly good

[@Tools-Tested]

Will do! thanks for the info!

[@downsouthlouisiana]

I have the Bosch (Which is just the Dremel). Love it! The only thing I wish is that they added a locking head on it, the bit pulls out sometimes.

[@Tools-Tested]

Yeah that is one drawback that looks to be fixed on the go 3.

[@jasonberger3227]

I have the Fantikk that I got at Costco for $40. Honestly, I hate it, and plan to return it. Don’t get me wrong, for a basic electric screwdriver, it is ok, and the packaging and case is absolutely beautiful, but the ergonomics suck. There is no grip, so any torque on a screw wants to twist the driver out of your hand. The forward and reverse buttons are placed poorly, and I always have to rotate and find the buttons to use it. I also have an old Skil electric screwdriver that has the twist ring at the top to forward or reverse, and although it doesn’t have the same torque, it is much easier to use and provides better grip to drive screws as needed.

[@Skobeloff...]

micro usb is poor marketing these days

[@Tools-Tested]

Yep should even be selling it.

[@dearbulls]

Although none of these using USB C is providing faster charging than micro USB. Just a marketing strategy. 😂

[@Skobeloff...]

@@dearbulls usb-c is the standard, if everything used it, there wouldn't even be any need to ship cables with every item, saving on costs, and resources. Humanity needs to lift its game.

[@dearbulls]

@@Skobeloff... You are assuming everything with a USB C port would be able to share the same charger and cable. However, not everything using USB C supports PD standard. USB C is only an interface, it's not a charging standard. Some of my USB C devices can only take 1.5-2.5A slow charging and not work with a fast charger. If you plug them into a PD port they would not reliably charge. It's why I'm not a big fan for slow charging devices go for USB C then still has to use their own slow charging standard. In an ideal world, if all USB C devices can charge at fast PD port, only at reduced power, that would be ideal. But it's only the case in real life

[@Skobeloff...]

@@dearbulls you should definitely stick with micro usb then...

[@dsgamecube]

Why does SBD think they can get $90 for that DeWalt when theyre also selling an 8V model for less?

[@Tools-Tested]

Idk, it looks like they are phasing the 8V out....which is crazy. But the pistol 8V is out of stock at all the major retailers.

[@waynebaker2452]

You showed the other Ryobi Lithium in description but didn’t test it? It folds to a stick.

[@Gabriel-i1z1z]

Denali has a great product that beats most of these

[@tobylester6476]

The fanttik can be purchased at Costco for under $50

[@Tools-Tested]

Nice!

[@2down4up]

Great video! Love what you do! I got the new Milwaukee 71/4” circular saw plus Forge 8 and 12.0, it is an absolute monster of a saw. Can’t wait to see what you can do with them!

[@Tools-Tested]

Thanks! Yeah I’m hoping to test circular saws at some point next year

[@2down4up]

@ Well I’ll be patiently waiting while looking forward to it!

[@parneypots]

👍👍

[@Tools-Tested]

Thanks!

[@highlanderes]

In conclusion Worx and Amazon is basicly the same, except Worx charge in less than an hour and Amazon 3+ hours.

[@Tools-Tested]

Yep motor wise they are basically the same.

[@michaelhess4825]

I got the Amazon based on TTC's review. I also have the smaller Fantec (Roytoa) with the absurd assortment of bits. Very happy with both!

[@Tools-Tested]

Nice! Both are solid from my testing. Glad to hear you are happy with them.

[@aCuria.]

Its odd ranking based on torque rather than ergonomics and usability. If torque matters then pull out the impact driver

[@RubberDuckStyle]

👍👍👍👍👍👊

[@Tools-Tested]

Thanks!

[@SeanyMacks]

You forgot the Worx WX242!!! You tested an old model.

[@Tools-Tested]

I will have to check it out! thanks for the info!

[@battedtomcatnlnl153]

That worx is the same as ferm(action) in EU. I got 1 for €9 on sale. Normal price is €13. They scam hard with $40

[@joshuaking34]

Micro USB is a deal breaker.

[@Tools-Tested]

Yeah come to find out, overseas they already have a new version with USB C....