BEST MotoVlog AUDIO settings // DJI Mic 2 & Osmo Action 4 // 4K

[@DITH85]

Great and informative video helped me a make my mind up about pulling the trigger on a MIC2

[@DSR1YT]

Good choice mate. You thought about the mic mini that’s just been released ?

[@DITH85]

@@DSR1YT Honestly I haven't heard about it thanks for the tip

[@T3b_Custom]

Thank you very very much for review 🎉❤❤

[@DSR1YT]

You’re welcome mate. 🤙

[@ADVBrett]

-12 gain NC Off - no wind noise and some engine noise. Love that -12 gain NC On - yeah too quiet and engine sounds weird! -6 Gain, NC off (I use this setting) - I get a lot more wind noise, sounds more natural. I like it! -6 gain NC On - I don't mind that at all as well. Good engine noise but some weird background sounds on occasion No gain, starting to get some peaking but still ok. Great test mate, it's such a good set up, sounds great on the GS!

[@DSR1YT]

Great comment mate. I’m starting to put it on -9 NC off. As I find myself bumping the audio level up slightly when editing the videos. Hopefully this will negate that and it still be decent audio. 🤙🤙

[@ADVBrett]

@@DSR1YT Nice!! I'll give that a go with my set up in the coming days then!

[@Senthiil]

​@@DSR1YT Will try once I go back to my home country.🤩

[@DSR1YT]

Hopefully it helped with your set up mate 🤙

[@ADVBrett]

@@DSR1YT Certain did mate, this is without a doubt the best motovlog set up. Great tutorial too!!!

[@bikerbuddy3166]

Spot on you have now given the information I needed to sort out my audio nightmare 🙏

[@DSR1YT]

Great news. Any other problems then drop another comment and I’ll try and help out where I can. 🤙

[@bikerbuddy3166]

@@DSR1YT thank you 🙏

[@SaskRiderMoto]

-12, noise cancel off and visor down. Thanks for the video. Now replace that go pro on the handlebar with another action 4.

[@DSR1YT]

I see people talking about the action 5 pro which might be coming soon. That’s what I’m waiting out for 😁🤙.

[@JoshConnectMedia]

@@DSR1YT cool

[@NobleBok]

@@DSR1YT well, it's here now :) the Action 5

[@DSR1YT]

Ah tell me about it. Just as I drop the cash dollar on a new iPhone 16 pro as well. Zoes not going to be happy 🤣

[@xZenoRides]

I've been recording videos for a couple months now with +6 gain because i didn't think it had a setting for it as u need the mic plugged in... 🤣 This helped me a ton thank you!

[@DSR1YT]

Haha. Glad I could help you out mate 🤣🤙

[@xZenoRides]

@@DSR1YT yea u deffo did, maybe i should read instructions in future 😂😂

[@DSR1YT]

Where’s the fun in that aye 🤣. Instructions are for when you absolutely can’t work it out 😝

[@i4Detailing]

I think you have just solved my issue, I have a RPHA1 and use the mic in that, I have had a lot of echoing on my Panigale V2 like you have just had with the Noise Canceling “on”. I’m going to try it with it off today and see how it goes. Thanks mate

[@DSR1YT]

Glad I could help out mate. The mic just tries too hard to cancel the sound of the bike to effectively pick up the sound of my voice as well. Let me know how it goes on your v2.

[@i4Detailing]

@@DSR1YT I will do mate, are you using the wind sock on it ?

[@i4Detailing]

@@DSR1YT mate I turned the noise canceling off and it is 100% better and I don’t have that horrible noise !! Nice 1 for doing a video like this.

[@paulkiley4667]

I've just got the DJI Osmo 4 and wireless mic. Thanks for this test and providing the settings. It all sounds good to me. How did you fix the mic into your helmet, velcro? Cheers 👍

[@mart7798]

i dont do moto vlogging,this may aswell be in spanish!here to support the channel!👍

[@DSR1YT]

All the support is welcome here mate. Won’t be long before you’ll be a fully fledged motovlogger with your new adventure bike 🤣🤙

[@mart7798]

@@DSR1YT too faffy for me mate,im just out for the ride!

[@swiftbutfun6316]

Great video and very useful info. Thank-you. Quick question, where/ how do you place the mic? Is it in the helmet?.

[@DSR1YT]

Thanks mate. Check out this video where I show you how and where I mount the mic. kzbin.info/www/bejne/nIXco4Z4jKaJq9Esi=q2yopf5hBSjyQQuX

[@swiftbutfun6316]

@DSR1YT thanks buddy. I'll check it out.

[@ADV_Agenda]

Great video, Are you turning noise reduction of on the mic or in the Action 4 settings?? I believe it's on both.✌️

[@DSR1YT]

Thanks mate. I make sure it’s off on the camera when I do my final checks before filming. 🤙

[@DabneyAle]

Hi, I use the same settings on the DJI Mic 2 -12 dB and noise cancellation disabled When it is activated, strange sounds are heard, not so natural Although I would like the ambient noise to be heard a little less, I was thinking of buying the DJI Lavalier Mic but I haven't seen many reviews The audio issue is always complicated in motovlogging Greetings from Peru ✌

[@DSR1YT]

I also thought about the lavalier mic before buying the DJI mic 2. But now I’m not going to bother. I’m more than happy with my set up and performance as is now. 😁🤙

[@404michaelnotfound]

Great video, was thinking about making a video myself, but now i dont have to. I think somewhere between -6 and -12 is the sweet spot. How do you place your mike in the helmet. Do you use a magnet ?

[@404michaelnotfound]

I dont have a lot of space around my chin...

[@DSR1YT]

Hay mate. Appreciate the comment, hopefully this link works. If not check out my mic vs purple panda video on my channel and I show you where and how I mount my mic. kzbin.info/www/bejne/nIXco4Z4jKaJq9Esi=63yDlJ5z636624YH

[@404michaelnotfound]

@@DSR1YT oh wow, yeah that was it... was actually thinking about grabbing an extra pair of dji magnets. Thanks again mate...

[@DSR1YT]

@404michaelnotfound no worries mate, glad I could help. I couldn’t find any of the official DJI magnets and just grabbed some square magnets off Amazon. Holds the mic well enough and it’s never dropped out by itself, unless my fat fingers pushed it by accident 🤣

[@GreyBiker99]

I use -12dB too, as I found wind noise caused clipping at high speed even with my visor shut. Totally agree with noise cancelling off as it makes it sound "burbley" with it on. I have experimented with using a lav plugged into the Mic2 so I can still talk with the chin bar raised on my modular helmet, but not had much luck above 30mph as it just gets overwhelmed with wind noise. I did try having the receiver plugged into the side of the camera, but it fell out and I ran over it so it was destroyed. Oops!

[@DSR1YT]

Haha ran over it, i do sometimes get paranoid that the mic will randomly fall out and I’ll run it over too. Trial and error at this stage mate, this is why i done some research on quiet helmets as well, got to do as much as you can to help out the mic whilst riding aye.

[@SomewhereInside]

Bought osmo 5 pro do you know how to adjust DB and Noise Cancelling setting is ? Can’t find it on camera ?

[@DSR1YT]

Do you have the dji mic 2 as well?

[@TalosRider]

Question.... If you record audio with an external mic, like zoom or tascam to get your exhaust and ambient sound and rely on the dji mic only for your voice and try to cut out as much sound from the bike as possible, would you use -12 with noise cancellation off? or would you prefer the NC on.

[@DSR1YT]

For me personally. I’d still go with NC OFF. I don’t like how it makes my voice sound when it’s turned on. It’s constantly trying to muffle out the exhaust tone which then affects my voice. I know other riders like NC on. Like @peakybiker, pretty sure he always has NC on. 🤙

[@TheExtrographer03]

-12 NC off sounded great!! But wanted to ask what is the setting of low cut? Do you have it on?

[@DSR1YT]

hay mate, so my understanding that 'low cut' option if turned on, will check for noise frequencies at 100hz or lower and try to eliminate them, I have this option turned off as I dont know how it would affect the noise when on the bike. Again though, just because I have it turned off doesn't mean it's right or wrong, other people may use these mics in different situations that make having it turned on advantageous. as always, test and adjust as you go along mate.

[@7erdogdu]

It is better keep it off then apply EQ in post production.

[@gsd32i]

Hi. I have just got the mic 2 and action 5.....not particularly impressed with the audio at -12 and the 5 isn't noticeably better than the 4. I believe the 32 bit float only kicks in if you are using the receiver and have it selected in the receiver and then you have to export the audio file from the mic 2 to your computer to then drop it into your timeline . Just wondered how you have found the mic 2 after a few months . Position in the helmet? I have a HJC also. I may have to go back to having the receiver plugged into the camera like I did for the action 4 and original mic...which was good for 133mph!!!!!( allegedly) Regards

[@DSR1YT]

3x it float needs to be activated with the receiver yes, but the receiver doesn’t need to be used for the 32bit float to work once its activated. My mic will record a back up audio file of the 32bit float if i need it. I’ve yet to need it, but it’s nice to know it’s there. I’m still really pleased with my set up from mic to camera. 100% better than my experience with my go pros. Check out this video where i show you where i place my mic. kzbin.info/www/bejne/nIXco4Z4jKaJq9Esi=rs8KPPb4I41EhYUl . Also i put my mic level on to -9db now as well.

[@gsd32i]

@@DSR1YT thanks for the reply , some more testing needed for my new stuff 🤪. Enjoy the weekend 👍👍

[@DSR1YT]

@gsd32i sometimes that’s part of the fun though isn’t it. Trial and error mate. Enjoy your weekend too. 🤙

[@KarthikAdvento]

Have you turned off the low cut filter ?

[@DSR1YT]

Ive just checked and ive left it turned on, ive never noticed any issues with my audio to make me think about turning it off.

[@RollinThundervlogs]

Do you find it better using the DJI mic 2 directly, or do you use a lapel mic connected to the mic 2 and then wirelessly to the action 4?

[@DSR1YT]

I use the DJI Mic 2 wirelessly connected to the OSMO Action 4. No lapel mics used. Im more than happy with the outcome of my set up. Hope that helps.

[@RollinThundervlogs]

@@DSR1YT thanks for the reply dude, that really helps. Do you use the dead cat when using the mic 2 inside your helmet? I’ve tried testing it in my Arai and it’s a bit tight for space in the chin bar?

[@DSR1YT]

@RollinThundervlogs I’ve tried it with and without the dead cat and I’ve opted to go WITH the dead cat, just to help try and stop any extra wind coming up under my chin curtain because the mic is upside down in the helmet as mentioned in the video. :)

[@SlackSloth]

I bought this setup today. I have Torc T1 Helmet. Guess i'll should -12 dB. What do you think? Sorry for my english. Hi from Turkey. Good Channel. 😌

[@DSR1YT]

So I’m trying out -9db and seeing how that is. I usually bring up the audio whilst editing my videos. So I’m hoping this -9db will remove the need to do this step. Hope this helps. Enjoy your new set up mate. 🤙

[@SlackSloth]

@@DSR1YT Thank you for answer :) i will try this weekend.

[@MudSlingMX]

Noice noice

[@DSR1YT]

🤣🤙

[@BazzaB1971]

-12 NC off

[@DSR1YT]

Happy days 🤙

[@-M-power]

Hey bro, I turned off N.C and dB down to 9 and still have a little bit of wind noise every 5 seconds. I do hard core twisty and Canyon riding. What's the best setting you recommend?

[@DSR1YT]

Currently I run NC off. -9 DB, dead cat on, mic upside down so it doesn’t get me breathing on to it. Chin curtain on my helmet, I researched helmets before buying it to make sure i got a quiet helmet as well. I close the chin vents so there’s no extra wind coming through. Visor shut fully so it’s clicked down and locked in place to reduce the wind coming in through the visor hole as well. In editing I usually up the volume slightly and add about 20/25% voice isolation, I use FCPX to edit my videos. Hope that helps mate. 🤙

[@-M-power]

@DSR1YT thank you so much. I usually put mic in dji action 4 case and put it in a suit chest pocket.