Best Practices for Operating Floor Buffers & Burnishers

[@MatchaTheVibeking]

Lied on an application and said I knew how to use a floor buffer, but now it almost feels like I actually have! Thanks for the excellent tutorial!

[@NessOrtiz-lk2yy]

Bouta do same thing fuck it neees a job lead position

[@Flesh2Spirit27]

I used one years ago this was also great for a refresher course. Im actually very skilled in the craft just been away for a minute.

[@ShallyneTerik]

Reading this comment of mine

[@jacoblocklear6809]

The belt loop trick was worth the price of admission

[@Terryg1968]

I didn't know that different pads were made for different speeds. Great information. I took over my dad's cleaning business after his stroke. We did a few strip and wax jobs before that, but now I only do it for one of my janitorial contracts. I use the buffer. Great video.

[@Syx696]

This is the best demstration of the both machines. Thank you very much for taking the time to explaining techniques for using them.

[@pLaIrVaIdNoGx]

Thank you. Just got one of these at my workplace and have never used one. I will definitely heed the warning of too much pressure. You may have just saved me a hole in the wall or worse.

[@DaveFarrey]

Thank you, I'm trying something different this time at work instead of scrubbing/waxing. The burnisher we have is an Advance but not high speed,getting good results with the pink pad but not so much with the white.Good to know that I had a great floor care teacher many,many moons ago. Very good tutorial!

[@karenjohnson1589]

I used the buffer to today at work, my body was stressed, I was nervous, but it all went ok, u just made a difference for me for next time ,,thanks

[@ImperialDade]

Awesome to hear Karen - that is exactly why we put these videos out, because it certainly is difficult to learn these movements. Best of luck moving forward, we are glad to have helped!

[@TheBalognaPony]

We got a tennant today, can't use it whatsoever. Goes for about 10 seconds and shuts off everytime

[@rogerleo4903]

This video saved my life !!!! Very detailed explanation how to drive the machine … Thaaaank you so much !!!

[@ImperialDade]

Thank you for dropping the note, we are glad this content was able to help you!

[@jammingj8187]

Thank you for taking the time to make this video it's very helpful i haven't used 1 in years just refresh my memory

[@joegriffin3055]

Up early.. O423.. Learning how to use both.. I was nervous but after this GREAT DEMONSTRATION I'M CONFIDENT THAT I WILL SUCCEED IN MY NEW BUSINESS!!! THANK YOU GREATLY!!

[@AnyHouseCleaning]

Excelent video and the belt trick to hold the electric cord was good. I will. Pass that information. Thank you. Subscribed already

[@caseyhunted]

Thanks for this y'all. First time using one of these and had no idea what I was getting myself into.

[@ayocxrry-2435]

I'm watching all your videos . I start my new job soon I'm new to this need this demonstration is very good !

[@AngelDiaz-i8q]

Wow very helpful and technical advice I’m going to be starting a new job and I’m going to get training in this very specific field I have a background in welding and metal fabrication just wanted to do something different and I have respect for your skills and techniques sir thank you

[@mariselatorres1957]

I'm having so much trouble with the buffer at work lol thank you for this tutorial

[@user-xe7ng5ri8o]

Thank you so much for sharing your knowledge. I just watched video and learned all that I need as I start my first time cleaning ceramic tile. Can you tell me name of company that sells least inexpensive machine that uses cyl indrical brushes

[@ImperialDade]

Hi! Thanks for watching! We are glad you found our video useful. Imperial Dade sells a variety of auto scrubbers to meet different needs and budgets. Check out our catalog here: www.imperialdade.com/catalog If you have additional questions or are ready to buy, contact us here: www.imperialdade.com/lead-generation

[@everybodylovesraymond1275]

At work we have grey epoxy floors. Once I have the floors clean is it okay to use a burnishing pad to help give the floors some gloss?

[@TheHomicidalTendency]

Im curious if you tried it yet. My thoughts are "it depends on what kind of epoxy and if there is a clear coat" It should buff some scratches out and smooth it, but the epoxy might be too hard and it may do nothing. As long as you don't use a too abrasive pad the worst thing that can happen is you just clean it a little by dry/wet sanding.

[@MarioMocinho]

Olá. Tenho uma duvida. Qual seria o mais indicado para limpar o piso Vinilico plástico? Obrigado

[@ImperialDade]

Olá! Obrigado por assistir. O piso vinal, geralmente conhecido como LVT (ladrilho vinal luxuoso), pode ser limpo com uma esponja vermelha ou escova macia em uma lavadora automática e um limpador neutro. Para ajuda adicional, entre em contato conosco aqui: www.imperialdade.com/help-center/general-inquiries?pathname=/

[@MarioMocinho]

Obrigado pelo retorno. Este link nao está abrindo. Pretendo comprar uma lavadora de piso... Valeuuu

[@mikemg2960]

thanks! which one would be safe and provide great results for cleaning/buffering an epoxy covered floor? There are many black marks on the floor

[@ImperialDade]

Hello! Thanks for watching. Great Question! Without seeing a picture of the floor, the general rule with epoxy floors is that a red pad should clean it well with the correct chemical. A blue pad may work but could scratch the epoxy. If you decide to try to the blue pad, make sure to test it it in a small, inconspicuous area first. Epoxy-finished floors are fairly soft, so you must be cautious of the pads used. That said, the floor cleaner is also a factor. Never use a heavy-duty degreaser as this could also damage the floor. It can be tough to remove black marks, but with an all-purpose cleaner and a red pad, you should get a decent result. For more help, reach out to one of our certified specialists: www.imperialdade.com/help-center/help-with-product?pathname=/

[@suresolutions1288]

This demonstration is excellent

[@ImperialDade]

Thank you for watching our content and finding value. We appreciate the feedback!

[@rickkipp1600]

If I spray buff with a swingarm and white pads should I do 175 rpms or go with the higher setting on the swingarm?

[@duanegantt5792]

great video, I'm using an Oreck Pro floor machine, but the principles are the same I would imagine., yes?

[@ludiperez3894]

I have a 175 from powrflite, it goes to the left side only I can't make it go back to the right, what should be the problem? I have use it only once no experience with it.

[@Daunte1984]

We have a walk behind T300 autoscrubber , can that do a quality job stripping vct tile compared to Swing arm machine?

[@ImperialDade]

Hi there! Thanks for watching. Unfortunately, an automatic floor scrubber is not the best machine to remove wax from your floor. The machine does not have enough pressure to adequately remove finish. We recommend a swing machine for floor stripping. Aside from reduced pressure, using an automatic floor scrubber to strip wax from the floor can result in machine damage because there is now way to properly clean she stripper and wax residue from the bottom of the machine leading to mechanical failure.

[@rodrigoluna38]

Thanks for the training...🎉

[@lashannonmorris9762]

Thanks for teaching me proper way

[@agnesbitcon1885]

Hi, Do you have an outlet Company here in Australia specifically in Queensland? Thank you

[@ImperialDade]

Thank you for watching our video ALL THE WAY in Australia! That's awesome! Unfortunately, we do not have any connections outside of the United States.

[@yvettesmothers3123]

Can I use a mop as well

[@ImperialDade]

Hi! Thanks for watching our videos. We do not recommend using a mop and bucket to perform floor cleaning procedures. This method is outdated, time consuming and inefficient. To add, a mop and bucket can actually spread more germs and contaminants than clean. To learn more about the differences between a mop and bucket and an autoscrubber, check out this article: www.imperialdade.com/blog/auto-scrubber-vs-mop-and-bucket

[@tnwhiskey68]

I white pad with my burnisher(dont have buffer) and it does pretty well.

[@Vaampe]

There are different burnishers, what rpm is yours on ? The thing is the lighter pads are weaker and softer, and can literally start burning from the friction.

[@jesusquezada8530]

Thanks for the basic tips.

[@paparoblox85]

Nice videos a question do you think viper buffer 20"its a good brand and works good?

[@ImperialDade]

Hi Alexander - YES, Viper is an outstanding machine. We did an overview of the machine, check it out here: kzbin.info/www/bejne/Zme7eKRuZaigopI

[@gateway8833]

Can you use a Burnisher in the same manner as a Buffer?

[@truhunk1]

Put a little rubber bumper on the rear of that handle. You bumped the floor twice when loading the buffer.

[@ImperialDade]

Thank you for the tip, noted - we were concentrating more on the operation of the unit than the mechanics of the pad driver application. Had this been a real job, we would certainly recommend taking extra care for the floor at all times. We appreciate your feedback.

[@claudedesaulniers2300]

LOL. Ok, but I was more concerned about the handle getting damaged.

[@spike43m]

Can you use a burnisher as a buffer?

[@ImperialDade]

Hello! Thanks for watching our video! Floor burnishers, while similar in appearance to floor burnshers, serve a different purpose. Buffers and burnishers perform different tasks, and it is important to use the proper machine for the right job. Using the wrong machine to perform a selected cleaning procedure can cause damage to your floor and equipment. Floor buffers are low-speed, operate in a side-to-side motion, and can be used for various applications, including cleaning, stripping, scrubbing, or buffing. Floor buffers, on the other hand, are high-speed machines that drive straight and are only used for floor polishing. For more information on the differences between the two machines, check out our article and video: www.imperialdade.com/blog/differences-between-floor-buffers-and-burnishers

[@RayHaworth-by6js]

Ca60 24B suction will not work right

[@jonpfenghanssl7320]

Good video, not a clue about this now I do

[@livinlaughingloven]

Great video but we never suggest allowing the handles to slam to the floor like that just a suggestion.

[@lbthebarber3183]

Thank u sir, the side by side at my job is a model T, and it almost took me places on one shift😅😅😅

[@JustJanitor]

Thank you for the informative video

[@petertomovic]

I was having hard time understanding how the rotary machine works , until today 😊 Thank you

[@ImperialDade]

HI Predrag, Thanks for watching! We are glad you found this video useful. Don't forget to like and subscribe to our channel so you can stay up to date on the latest videos!

[@BeerkegGarage]

What about a red pad? I use a red pad with the 2000 rpm machine

[@TheHomicidalTendency]

You don't burn the wax? Red pad is more abrasive more friction, one of our custodians burned a burnisher motor up with it.

[@BeerkegGarage]

@-Bryan- the wax gets burned if I leave it in the same area too long, the motor does fine as long as I keep the fight pressure against the pad. The red pad would get me the best finished product but the floors I was burnishing had about 10 layers of wax on them

[@doctorultraclean7277]

Great video, very helpful - thanks!

[@ImperialDade]

Thank you for watching our video - we are glad it provided value to you!

[@kevibsmith3543]

This is better than my jobs training they called the burnished a buffef

[@OLUMIDEABIODUN-y4y]

What's the difference between buffer and burnisher machine because it looks the same

[@ImperialDade]

Hello! Thanks for watching! You are correct. Both floor buffers and floor burnishers appear to look the same, and many confuse the two machines. However, they are two totally different machines used for unique cleaning procedures. A floor buffer is primarily used to strip or remove wax from the floor. Depending on the floor pad, it can also be used to buff, clean, or scrub dirt and scuff marks away. Floor burnishers are only used to polish floors to achieve a high gloss shine. For more information check out this related content: www.imperialdade.com/blog/differences-between-floor-buffers-and-burnishers kzbin.info/www/bejne/h6O4h6lrZbR5r6M kzbin.info/www/bejne/n3nLopKeaqqXgNU

[@erikaparra6124]

FLOOR BURNISHER 19" VANQUISH 1500 RPM 1.5HP how is this machine

[@ImperialDade]

Hi @erikaparra6124, thanks for watching our videos! The floor burnisher you mentioned, 19" VANQUISH 1500 RPM 1.5HP, is a lower quality private label machine. Imperial Dade does not sell this floor burnisher, however, we do sell several other affordable, high-quality machines. Check out some of our options here: www.imperialdade.com/catalog/products/floor-care?p=1&cid=WCL3069 If you have additional questions or are ready to make a purchase, reach out to one of our qualified equipment sales representatives here: www.imperialdade.com/registration

[@wen_994]

Thank you so much!

[@Vaampe]

Hey great video ! Just a pro tip - never have the machine plugged in while placing your pads !

[@ImperialDade]

Thank you for your tip. Its definitely good practice to load the pad without the machine plugged in usually. This machine does have a safety that needs to be depressed at the same time the triggers are pulled - so there was not a chance of it starting on accident. On machines with no safety, absolutely do not plug in the machine before putting the pad on.

[@antoniodalessio8027]

Great video

[@DJlocomotive1]

Thanks sr.!

[@mrfrench00]

Excellent

[@antonioduarte9945]

Did you sale all the types of pad and waxand how are your price Iam in Ontario canada email me back. Thank for your help.

[@miss_k3602]

Thank you Sir

[@billyshroo3263]

First time I used one of these I almost wiped out a shelf of ceramic gnomes

[@ImperialDade]

Yikes! Be careful out there! Thank you for watching our content

[@antoniodalessio8027]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@barakaallen5901]

i thought it was broken after dropped down 😂😂

[@larrygamble9274]

That buffer sweet bro but im buffing 67,000 feet so i need it to be cordless.

[@GDog00187-]

I have been doing it all wrong.

[@antoniodalessio8027]

Great video

[@Beluel]

You need to fix your website , is not 100% creo phone friendly , also start selling online courses, you are already making videos?

[@ImperialDade]

Thank you for your feedback, we will check our website to see if something is broken with mobile responsiveness. As for your suggestion of online courses, we continue to add new courses periodically. Please feel free to browse our course listings below, and add your name to the waitlist so you will be informed when new online courses are added: www.ebpsupply.com/training/offered-trainings

[@Beluel]

No problem thank you guys for the reply

[@Beluel]

Do you have online courses ?

[@mudshark23]

The very next best practice on a burnisher 💥¡BAM! 🫠