Best Primer Ever? - HC 456

[@JoshBredemeier]

For those considering trying this, a couple of things not mentioned in the video: lacquer thinner (and other aggressive solvents) will deteriorate the seals in lower end airbrushes-- make sure your airbrush has ptfe seals before attempting. Also, n95 masks and similar are not sufficient for lacquer thinner, please use a mask rated for organic vapors

[@Roke1222]

*looks at filter* P95 … Well fuck me in the lungs repeatedly for 3 years

[@janfranc7427]

Ah okay what mask you use friend?

[@Roke1222]

@@janfranc7427 I just received a full face mask qui organic vapour filters. I should be fine for the future. Thank you for asking

[@JackDespero]

@@janfranc7427 I think I have the same as Vince. I went to Home Depot and bought one which I think was graded for organic compounds. Funnily enough, I bought it to clean a mess in my house. I did not want to deal with the odor, thus why it needed to filter organic compounds. As a side note, it seems that I have found a new usage for it!

[@JoshBredemeier]

@@janfranc7427 I use a 3M cartridge mask (similar to the one Vince is wearing at the beginning of the video). You can get cartridges for particles similar to N95 or vapors or both. I usually use the 3M 60923 cartridges that protect against particles/dust and vapors, covers pretty much all the bases.

[@markxivlxii1390]

I love the Mr Hobby Surfacer 1500 rattle cans. Black, white, gray and oxide red. For those without space to safely spray I really suggest trying out the rattle cans. I use em all year round here in Japan with perfect results every time.

[@davecolwell725]

Didn't know they come in rattle cans. I am going to have to try that! Thanks for the tip.

[@Timbucktoo32]

Agreed

[@FreelancerND]

Yeah, here in Russian we have whole special stores dedicated to Mr. Hobby stuff, cause historically we always had more scale modeling going, not miniature fuss. And once I saw and got meself Surfacer 1500 can - insta love. You lose only a little of coverage in some crevices of a particularly overposed model, but save A LOT of time cause you don't need to go through the airbrush chores =)

[@dokool]

We swear by the spray version of 1500 here in Japan because even from June through September you can still get a super smooth prime coat despite the ridiculous humidity. That said I definitely leave them outside (in a box on the balcony) for at least half an hour before bringing them back in. Don’t mess with those fumes.

[@CTCParadox]

My friend here always has to avoid the rainy days with his Citadel primers, but Mr Surfacer is great, it just doesn't care what the weather is like.

[@ThePingouin2ter]

Thank you for the feedback. What does the number refer to? I have seen 1500 like Vince used but as well some 1000.

[@Heimdall1987]

@@ThePingouin2terit’s the grit, the higher the number the smoother the finish, but also the more satin.

[@MrSfxer]

Japan is hot and humid as hell. If you guys swear by its performance then that’s all the endorsement we need.

[@v.denizunan9192]

That's pretty good info mate, I have the same issue in Istanbul and nothing seems to stick due to humidity.

[@pbkobold]

The company that produces Mr Hobby, GSI Creos, also makes incredible bang for buck airbrushes. The 0.3mm PS-289 is eighty bucks and keeps up with $200 airbrushes in my collection. A starter airbrush you’ll never outgrow.

[@laneawakeDan]

I purchased their equivalent of the micron for a fraction of the price and its SO GOOD

[@gosupaints5186]

@@laneawakeDanI got a ps771 as well! I love mine!

[@padrespeaks]

I've been spreading the good word of their airbrushes for years. I wholesale replaced all the badgers and iwatas a had and never looked back. Barbaros Rex sold me on them.

[@WilliamHatton0]

Only thing I found it can be hard finding spare parts and needles, they might share some parts with Iwata but not sure on that.

[@pbkobold]

@@WilliamHatton0 not as good as a FLGS, but spraygunner seems to consistently stock parts.

[@Delta66-jz1vl]

Indeed Mr Hobby products are much appreciated by scale or Gunpla modellers. I think (not 100% sure) that it is lacquer acrylics, not enamel. This type of product chemically etch into the surface, hence they are much more resilient than water based acrylic primers. This also make the m great if you scractch build or use miwed media, resin plastic, metal or whatever, you will have an even surface in the end. Note that Mr Hobby surfacers contain micro filler, and the lower the number the thicker they are. For example 500 grade can be used to fill some gaps, in that case brush application is more precise. 1500 grade is fine for priming. You get something like your GW chaos black spray can, including the toxicity.

[@draadhaai]

Hi vince. Not a question but more just a remark. You've been in this business for so long and I have learned quite a bit from you. Especially the color theory videos which are among my favorites. Just wanted to say: keep up the good work!

[@danemorgan7231]

Vince - I’m glad to see you give Gunpla products some attention 🎉. Mr. Hobby lacquers really are the best primers. I think you’ll really love the Mr. Hobby GX Metal Color line 😊. A couple interesting things: - the “400” in Mr Hobby leveling thinner refers to the amount of lacquer thinner in the bottle 400ml - “1500” in Mr Surface Finisher 1500 Black refers to the grit of the finish when dry, 1500 grit. - for safety, it’s worth mentioning that the respirator filters need to be rated organic compounds (VOCs). I like 3M P100 60926 or 60923 filters.

[@Tochir0]

I’ve been using this for my gunpla and scale models for years and it is an amazing primer and paint. I would also recommend eye protection. Also I believe it’s lacquer based and not enamel.

[@sanernes]

This +1

[@lucidnonsenseable]

Was dropping in here to mention that the paper mask shown along side the respirator in the video is no good, but I see someone was already on top of it.

[@pbkobold]

If you haven’t yet, for zenithal lights, try thinning the Tamiya flat white acrylic with lacquer thinner (especially leveling lacquer thinners). It takes the already great Tamiya flat white to an insane level of control with functionally no tip dry.

[@gutssubz8232]

The Tamiya X-2 white as they have a few ranges. It's cheap and with its thinner it is great. Durable, great control. Andy Wardle (Cult of Paint) swears by.

[@derekgarcia3069]

I need to try this. I know Cult of Paint swears by it too.

[@gosupaints5186]

I’ve been using the Mr Hobby Lacquer white for all of my white zenithal work now. It is the perfect white airbrush paint it sprays perfectly and you can thin it all the way down to nothing and still get a perfect spray! Tamiya xf white is still fantastic!

[@Thanos730000]

Is the lacquer thinner as toxic as the thinner Vince showed?

[@LukeGeaney]

I will be trying this!

[@theronhatfield8854]

I just started using this stuff recently as well, and I really like it. One thing to add is that the cartridges on your respirator should be rated for organic vapors to work with solvent based paints. I run 3M 60921 P100 cartridges in mine.

[@JackRovat]

Is an A2P3 filter enough?

[@theronhatfield8854]

@@JackRovat I don't think so. I don't see anything on it says it's rated for organic vapors.

[@JackRovat]

It is rated for Organic gases, is there a difference with vapours?

[@theronhatfield8854]

I don't know enough about that type of filter to say. I would get a respirator with the correct cartridges installed to be on the safe side.

[@komma8203]

So glad you guys did listen and started using this primer, its just the best. And the 400 on the thinner bottle is just the ml

[@Virakotxa]

@@komma8203 It actually pertains to the filling potential. Thinner the higher.

[@makoajohnson2341]

as a scale modeler/miniature painter i am so glad that you guys are all finding MR surfacer. It is actually a lacquer based primer and you can thin it out 100/150 primer to thinner.

[@bricktop2938]

I'm not. Supplies are patchy enough in the UK as it is 😅

[@makoajohnson2341]

@bricktop2938 I can find Mr surfacer in all types here in the US at any of my local hobby stores they. Besides GSI Creos is a Japanese company. Also most online stores or Amazon stores ship from us stores to us customers because of the regulations on volatile organic compounds in lacquer paints.

[@LuisSanchez-fm4bu]

Have been building models for 30 years and using Mr. Hobby for more than 15+ years on all my model kits (cars, military, Gundam and now miniatures) no complaints. If I made a mistake and need to strip the paint, good 91% alcohol will do. Also, you can pre-diluted (with self leveling thinner)and it will last you for months. Just keep it away from the sun light. Mr. Hobby primer is a must have. Highly recommended!!!

[@stressballer]

Do you paint your miniatures with mr hobby paints, or do you mean you use the primers and such only, and water based acrylics for the rest?

[@raimee81]

I'm in Malaysia and we are humid all year round. This primer, and all of the Mr. color line JUST WORK. Often I even use this black mr. surfacer as a semi-gloss black.

[@adirondackgamecrafts]

I discovered Mr Hobby products when building gunpla. Started using their primers and clear coats on minis and it works like a charm. You get the same results from the rattle cans, too.

[@derekgarcia3069]

I was wondering about the rattle cans, so this is great news. Will be nice for batch painting.

[@adirondackgamecrafts]

@derekgarcia3069 Absolutely! Just make sure you go outside, or spray in a well-ventilated spot. As Vince said, the stuff is toxic.

[@joshuajacoby8926]

For anyone who, like me, comes from a background of using other solvent-based finishes (and likes saving money) who thinks, "Hey, the Mr. Hobby Thinner is just lacquer thinner - I can just use regular old lacquer thinner to dilute the primer!" The Mr. Hobby thinner has a different ratio of solvents than hardware store lacquer thinner, and will add unwanted texture to your primer coat due to melting the plastic until the solvent flashes off. The Mr Hobby stuff doesn't melt your plastic - don't make the mistake I did :) That said, this primer is unparalleled in quality when used as directed in this video.

[@Sk3Let0r89]

I would also suggest getting mixing bottles. For Gunpla I have bottles and bottles of paint ready to go in their own premixed container.

[@narha_syd]

Do you mean paint already diluted in bottles ? How long you can keep paint already diluted?

[@baglio88]

If you want an acrylic primer that applies smoothly unthinned and doesn't clog, I really recommend Molotow one4all. I can prime like 40 figures with it without ever cleaning the airbrush in between. It's also durable enough for handling the models, perhaps not as much as an enamel primer, but has the upside of not producing toxic fumes when sprayed

[@MrGunnar177]

Does it work well with metals? I’m not concerned with resin or plastics really

[@baglio88]

@@MrGunnar177 I haven't tried it on metals, only resin and plastic. I would expect it to behave differently from polyurethane primers, since those form a gummy layer that can peel off. Molotow by contrast is pretty unflexible, i.e. if you spill one drop it cracks when it dries, but from my experience it has good grip on the surfaces I used it on. Don't know how easily it can be scratched off metal though, but for sure it won't peel. By the way it's meant to be a refill for acrilyc markers from the same brand, so it will perform similar to those

[@jesusbuddhaman]

It is also non toxic. Super safe for those of us who lick their brushes to a point

[@jesusbuddhaman]

​@@baglio88It adheres well to metal. I use it for priming cars for gaslands.

[@intothefame]

@@MrGunnar177 yes, works perfectly. I prime / undercoat my metal Infinity miniatures with Molotow.

[@Maeyanie]

3:51: As an FYI, that KN95 mask you show there briefly *_will not_* protect you from the organic solvent vapours created during airbrushing a solvent-based product. They're _only_ rated for particles.

[@jukuloma]

Curious: What ratings etc. should we be looking for in a mask?

[@Maeyanie]

​@@jukuloma I'm not sure if the colours are universal (Google it for your country just in case) but at least here, filters rated for it have a band in black (organic solvents only), yellow (acid gases & organic solvents), or brown (acid gases, organic solvents, and ammonia). So, the respirator mask he wears at the start and shows later is an example of a suitable one, as the filters on it have a brown band. However, _all_ of the N# and P# masks, as well as pink filters, are _only_ rated for particulates.

[@hanskloss7930]

Honestly I am surprised you have came upon it just yet. I have used it for ears and swear for it. It is THE BEST primer I have ever used and I never had any issues with it.

[@MrGunnar177]

Most Wargamers are unaware of scale modeling products. Heck airbrushes still have a stigma around them with some Wargamer’s.

[@edin6128]

Hey Vince, love your videos. Do you have a dedicated video on posture, arm position and related stuff? There is probably not a universal way to paint, but I think there could be a great benefit for others to see someone who is painting a lot (and long hours) how he's doing it. I'm asking, because last month I started painting longer sessions (some days 6-10 hours) and am starting to feel it. Part of the problem might be my hight (6'4). Thanks for your great content. Have a nice weekend!

[@S.A.S.H.]

Great idea. As a 66 year-old with minor, but nagging back issues, I really need some ideas on comfortable painting posture, seat to desk height and the like.

[@VinceVenturella]

I don't, but sounds like a good video.

[@UguuYianKutKu]

For resin and plastic i've been using the mr hobby for years as I come from the gunpla hobby, I do notice that metal miniatures and metal in general it doesnt really grip that well. Best I've found for metal is the tamiya spray cans "surface primer fine"

[@TheAndrian463]

I use etch primer on metal miniatures, and it works really well.

[@MasterShake9000]

Mr Hobby makes both resin and metal primers that stick perfectly to the intended material and are great for priming over as normal. The metal primer comes in both a rattle can and a bottle for brush-on application. Both forms dry clear. I’ve only seen the resin primer in a rattle can, and it dries grey.

[@Virakotxa]

All those precautions are still true for usual canned primers, like GW or Vallejo. Vaporized acetone and all...

[@MrMockigton]

true, but it is a hecking lot easier to get some paper and put it out on the driveway and prime some minis with a rattlecan. i do see the advantages of using an airbrush, but i am well satisfied with rattlecans (except bright whites and beiges.)

[@Virakotxa]

@@MrMockigton If you live in a city apartment like me, you get a portable spraying booth, a filtered mask and hobby on without killing ourselves, too. And works for either spray or airbrush.

[@robertclassicconstructiona1830]

Yup been using this stuff for years , love it and the leveling thinner is magic you can almost go to 2/1 ratio (thinner /paint) and it still comes out amazing , it's like having a spray can in a bottle.......nice to see more people using this ........try the white it's awesome too for contrast paints

[@TheRonHockman]

Using this, I just primed the entire Stormcast half of the Skaventide box in one sitting without dry tip, clogging, or any inconsistencies. I can't get over how easy it was. It went like a champ through a 0.4mm nozzle at 25psi. 11:10 ratio of thinner to primer. One thing to be aware of: the 1500 is super thin which really exposes any shortcomings in your model prep: mold lines, sprue craters, etc.

[@MasterShake9000]

Glad to see more wargame hobbyists catching up to the military modeling hobbyists like Night Shift

[@MrGunnar177]

It’s been a long twenty years of catch up. I came from scale modeling so I was shocked to see when I came into the hobby that people never used airbrushes or tamyia or any of the other standard products really

[@BailiwickVideos]

I can confirm this is the best!! Also, The spray can version is truly amazing for bigger projects. It’s perfect.

[@GoufinAround_]

Honestly, Tamiya, Mr Hobby and other scale modeling brands are so much better than miniature brands. I only use rattle can primer atm but I’m saving up for a better spray booth before I switch. Then I plan on using the tamiya flat white for zenithal pre shading

[@AndyTaylor_Paintguy]

I've been using it for a number of years on my scale models, brilliant stuff! I've tried several others since but I've found nothing yet to beat it.

[@VinceVenturella]

Great to hear!

[@syd4890]

I'm in the UK and prime with zero issues using VA Black Primer. Good grip, paint flows and sticks to it without a glitch. Details are kept crisp to. I do dilute it 1:1 with Airbrish thinner with 3 drops of Flow Improver already primed in the airbrush. I use small batches and clean up after going through 5-10 minis. While cleaning the airbrush the previous layer is curing on the minis. I do about 3 layers of black and then a zenithal using either an Ivory or tanned VA primer. So a total of like 4-5 thinned primer layers. After painting I just use an auto shop satin lacquer and presto: hard solid paint shop for gaming

[@giovannistefani6990]

i love that you started the video with the mask to make it really evident, and kept reminding to keep safe all throught the video :D

[@VinceVenturella]

Thank you!

[@fraktilfilth]

Mr Hobby 1500 is also available in a spray can over here in Scotland so should be available everywhere else too. Ideal for spraying outside if you don't have an indoor setup

[@LittleIAO]

The timing on this is wild. I was just looking at swapping a lot of my new paint process over to Mr Hobby stuff! Gotta get the right ventilation.

[@Splodgenessabounds-j8o]

For anyone without an airbrush, The Mr Hobby Surfacer spray cans also produce excellent results

[@JollyRoger286]

Vince i gotta say every new video have been the exakt topics i have needed for more information about, as a new hobbiest. You are my rock and soothing crib in a dark ocean of information, thank you.

[@VinceVenturella]

Glad to help :)

[@IrishmanErrant]

Absolutely completely agree! GaiaNotes and Mr Hobby surfacers are GAME CHANGING PRIMERS

[@JackDespero]

As a possible alternative for people who might not want to use this, or do not have an airbrush, I get what looks like quite similar results with the rattle cans of Vallejo black. They are much cheaper than Citadel's, and they come with two nozzles. I always use the one for lower flow. The normal one is like Citadel's, it is very easy to put too much paint. The slow flow one actually works more like the airbrush in the video. I have decided to try this and see how it goes, but it will take 2 weeks to arrive, so...

[@MrPace-ge4qy]

All Mr Hobby products are awesome

[@DeeeFoo]

Once you've experienced the joy of solvent-based paints through your airbrush, it's really hard to go back to acrylics. I now try to only use solvent paints through my airbrush if I can help it, and leave the acrylics for hand-brushing. They spray better, go on smoother, create a harder finish, don't run/spider as easily, and are very forgiving to being overthinned. As a bonus, they're also easier to clean out of the airbrush. Lacquer modeling paints have been the staple of Gundam modelers and garage kit painters for years, so I've always wondered why it took so long for miniature painters to join the party. I encourage you to try the rest of their line!

[@edwardcross5667]

Thanks Vince. Jon mentioned using this back when he was working on his GD piece, but you blew it apart. Absolutely giving this a shot, as I've experience bad batch and consistency issues with Vallejo the last couple of years. x

[@kevinhayes517]

Thanks for another excellent tutorials/review. I’m going to try this Mr. Hobby on my next figures. Thanks again!

[@VinceVenturella]

My pleasure!

[@VetBodGaming]

OMG YES, I've been searching for something that will get me the convenience of airbrush priming without the durability loss you get with acrylic primers. Living in NC the humidity kills rattle can primers. Im going to try both the rattle cans mentioned in the comments and this. This video is literally a life saver as I went back to Vallejo primer which has better durability but requires me to do a full airbrush clean after using or risk a major clog.

[@madMARTYNmarsh1981]

I spent quite a lot of money on an airbrush (H&S Infinity cult of paint version), compressor (Iwata Smart jet plus handle tank compressor), and airbrush booth. It all sits rarely used because I have so much trouble with using acrylic paint through it. When the airbrush was delivered, the box was damaged, and the airbrush itself had been rattling around in the cardboard box. There wasn't any visible damage, but I have so many problems when using it that I think it has something wrong with it. I think I will try this Mr Hobby primer to see if I can actually get some use out of my airbrushing stuff. Cheers, Vince.

[@TerrierHalo]

Sounds like cleaning it takes about the same time as listening to Lacquerhead, and that’s a point for it. On a slightly more serious note, this is something I might look into if I ever have a ventilated area not even attached to the house to do things like this in.

[@JayAdan]

The Mr Hobby line of products was available at the first hobby shop that I worked for back in the 80s. Everybody who used those products swore by them. In general, they have good stuff. Still, I didn't see anything here that made me want to divert from my own current favorite primer - Stynylrez. I REALLY don't like having to move back and forth from water-based product to non-water-based products because of the need for extra airbrush cleaning needed between those products. Not to mention the added fumes. On top of tall of that the Mr Hobby Primer is pretty expensive. Stynylrez is about $.05ml. Mr Finishing Surfacer is $.30ml. That's a huge difference. I appreciate you sharing your experience and I will probably still give it a try at some point to see if it might be worth the expense.

[@thereisnosaurus1]

Have you tried the Mr Hobby Aqueous yet Vince? Acrylic primer from the same range, I've found it very good, better than any of the other equivalent acrylic primers, but I've never tried using the enamel range so I can't say how it compares.

[@BeArDyBeArS]

bumping

[@CTCParadox]

I've used both. IMO the lacquer primer is a bit better, with coverage, finish etc. But the Aqueous is still pretty great and needs a lot less PPE to use. The Aqueous is my go to now, just for convenience and I have kids in the house so I don't want to risk exposing them to anything nasty.

[@VinceVenturella]

Haven't tried it yet, but I will have to give it a shot!

[@haltes]

​@@CTCParadox While Aqueous line is much less toxic than lacquers, its isopropyl alcohol based and 'water soluble' (hence the name) and it is still recommended to use respirator for VOC + spray booth + ventilation combo with it, just a heads up

[@crackilator]

Yes! Glad you finally tried this stuff out. (I recommended it in the comments of your last primer video)

[@VinceVenturella]

Hope you like it!

[@Capzielios]

I remember asking about these back when you did your primers video, extremely stoked to see you cover them for the model hobby. And I'm glad to hear your take Vince! Now I just gotta get someone to try out the Triangle hobby knife and I can feel truly vindicated as a hobbyist in both the modeling hobby and the model kits hobby.

[@MrGunnar177]

I’ve used that knife before. No problems here!

[@Capzielios]

@@MrGunnar177 Trying to get a reviewer to use it as well! I use it for drilling gun barrels and minor scribing work. Along with all the other uses a knife has. I think it could really help reduce waste in the hobby and be a really nice tool.

[@markshuler719]

I use the rattle can version, but otherwise 100% agree. Of course, this means I'm obligated to prime those minis on a day with good weather, so there's trade-offs.

[@Foxhull]

Just adding something here as I just got some in myself and had a couple false starts running it through the airbrush - lower pressure is very important. Blasting it at 30-40psi like you can with normal polyurethane based primers will cause it to dry inside the airbrush immediately. After I cleaned that out with hardware store thinner and lowered the pressure down to the 12-15psi range it sprayed beautifully!

[@Coraxery]

I picked up the 400 leveler thinner long ago because of the scale modeler community, I use it with Tamiya 'acrylics' it's great stuff regardless of the actual primer you use. Cheers

[@chucklamb3496]

Vince, I’ve been using Vallejo water based primers without any problems, it covers good, doesn’t hide details. Dries quickly, and is tough. Paint adheres good also. Airbrush cleans with water.

[@VinceVenturella]

Yep, I have used those for a while as well, nothing wrong there.

[@BearCavalry91]

The 400 on the bottle is just the size of the bottle. Glad more miniature guys are seeing the light of lacquer primers/paints.

[@helotaxi]

It's not so much "seeing the light" as it is that things are cyclical. When I first started with wargaming in the late '90s, lacquer based enamels from rattle cans were the only options for priming. As acrylic enamels started taking over the hobby, more and more parts of the painting process when that way. Acrylics are easy for a beginner, to get into; low/no toxicity, super quick drying, thins and cleans up with water, airbrushes easily and so on. But the reality is that acrylics aren't the best option for even most portions of the painting processes, but depending on when someone came into the hobby, it's probably all they know because it's been the dominant player in the hobby for over a decade. As such, getting back to the original techniques and accepting their toxicity issues that brought on the acrylic dominance in the first place for the otherwise superiority of the product in results is what's really going on here.

[@jf7231]

Mr Hobby paints are hands down the best, but man am I sensitive to the fumes. I have an extraction fan and I use a respirator but I spray in my study. If you are able to use these easily, you cannot go wrong.

[@yobtar]

I got this stuff when Ninjon mentioned it and its amazing!

[@nathanhilderman867]

You also need to wear eye protection with these paints, they can seriously damage your eyes if you get it in there.

[@pariahzero]

High VOC enamel and lacquers were the first thing I ever airbrushed with; they certainly have their advantages. Having done "Kustom" auto paint and airbrushing, I've also used the urethane chemistry paints that are preferred by the industry, and Mr. Hobby's got _nothing_ on the toxicity of Urethane paints. Again, they have incredible properties too. I've personally been experimenting with shellac (the kind you mix from flake yourself) - paint (oil, acrylic, enamel, varnish, lacquer - pretty much. you name it, it'll stick) adheres aggressively to shellac, shellac adheres to just about everything aggressively, and you can cut shellac pretty thin. No clogs, no problems. Even dried out shellac will re-activate (years later) with alcohol, so cleanup is completely painless. The one problem I've had is my shellac flakes are very light colored, so it goes on clear - it's difficult to see where I've applied it. I'm going to experiment with dying it, using it as a candy color, and mixing in pearl flakes as well. That said, so far, shellac doesn't hide details at all, and has proven pretty promising.

[@TheAndrian463]

Best lacquer primer I've used hands down on plastic minis ... it's 'hot' so eats into the surface well.

[@Baleandor]

I love seeing more scale model stuff slip into the mini scene! I have both the black and gray primers and they are fantastic! I can eyeball the sumbitch and even have it pre-thinned in a bottle. I can't wait for you to check out ALCLAD's chrome and Mr Color's clears!

[@tylercarrera2898]

You mentioned this a few weeks back and I’ve been hoping for a video! A project I was proud of was ruined due to peeling primer recently, so I’ve been looking for alternatives.

[@charlessimmons7825]

Love Mr Hobby, especially the 500 for repairing surface defects but.... the AK Gen 3 primer (black) is awesome and not as harmful, super matt finish and a great primer for anything to adhere to

[@matao0661]

Mr hobby makes great products and their airbrushs are great with reasonable prices.

[@JackDespero]

Maestro, have you tried applying the primer with the brush? It would be interesting to know whether it works, despite being slower, for people who do not have the ventilation to do the airbrush. The lacquer cleaner is still toxic, but it is easier to get out of your house to clean some brushes, than to move the entire station out to pain.

[@VinceVenturella]

Yep, you can do it, it's still a good idea to do the leveling thinner.

[@JackDespero]

@@VinceVenturella Thank you. I bought it, and then I realized that while I have a setting and a mask, I may want to start with a potentially least toxic introduction, so I will mix half and half, and apply that with an old brush and see how it fares. 2 weeks until delivery, so I have time to ponder. Thank you, Maestro.

[@markgnepper5636]

I love all Vince Venturella videos 👍👏🤘

[@Jeremy-kl3ch]

Vince is the man!

[@sevencoloredmage8726]

When I read the title I knew it had to be Mr Surfacer. The 400 on the Leveling Thinner is the size of the bottle (400ml in this case) The 1500 is the grit, like in sandpaper. 1500 is very smooth, so best used as final primer like in your video. If you sand your pieces down (vehicles or gunpla) the grittier stuff like Mr Surfacer 500 will work great as filler primer. This stuff is not only durable, it also sands down without tearing and creating a hard edge like many acrylic primers do.

[@lightningminaturesstudio]

Been looking at getting this, so great to see it being used. Definitely a soon to be purchased product.

[@VinceVenturella]

Great to hear!

[@kingkreaghan]

I'm working on getting a decent airbrushing setup going. Would definitely like to Mr. Hobby. I usually use Vallejo or Monument Hobbies. I've never really had an issue with them, as of yet.

[@PartnersofMachino]

Hi Mr. Venturella. Thank you for the video. I am also a fan of the Mr Finishing Surfacer. Can you share your ratio for the white zenithal into the airbrush? I have struggled to find the right ratio, and have paints often run.

[@VinceVenturella]

About 9 drops of thinner to 4-5 drops of paint.

[@PartnersofMachino]

@@VinceVenturella thank you!

[@the_uggh]

Saturday morning chemical warfare with Vincey V!

[@DCUATL]

Mr Color paints are foolproof magic. Base coating large models like KO boats is a snap BUT they don’t brush well (you need another type of thinner for that) and the toxicity is STRONG which makes it tough to do touch up work.

[@spacedock873]

Hi Vince. Coming from scale modelling I have been using Mr Hobby primers for some while - ever since I managed to peel a complete layer of Vallejo primer off a model in one sheet! Indeed, I still have big bottles of acrylic primers on my racks but just don't use them. After almost throwing my airbrushes out in frustration a couple of years ago I switched from water based paint to lacquer based paint after chatting with a professional modeller and the experience was like an epiphany. I still use water based paints for brushing onto minis but on the occasions that I need to airbrush them I expect frustration and clogging. The big issue, as you correctly emphasise, is that the proper filtration and extraction equipment is required. I am fortunate that my hobby shed has this. My only question is why you use another thinner for cleaning when you already have Mr Hobby 400?

[@VinceVenturella]

I didn't find the 400 cleaned as effectively.

[@jukuloma]

Mr Hobby 1500 is a lacquer paint and you can dilute it with the 400 more than 1:1, it's not fussy at all about the ratio. A very good alternative is the Mr Hobby Aqueous primer. It's similar to Tamiya (solvent based lacquer), which you can clean with water. Less toxic than true lacquer. Also comes in a rattle can (1500 as well) - a good alternative if you don't have airbrush.

[@galatician8063]

I appreciate the knowledge, but short of using it from rattle can occasionally no amount of benefit would outway the grief my wife would give me at the 1st hint of an odor! Stynylrez was my go to until I started using Pro Acryl, which has been great exept their white primer has been tricky. My standard zenithal now is inks cut with AK Ultra Matt Varnish. Thanks Vince!

[@Gamer-Drek]

I’m a Stynylrez guy myself. While I’ve not had issues with the primer rubbing off I have had cases where the paint didn’t grab as well… rare but it’s happened.

[@MrGunnar177]

I’m sorry but that’s a terrible product. MiG by ammo’s one shot primer is badger ‘s rebottled as well. I find it doesn’t hold well, spray well, and I’ve gotten multiple bottles after they froze in transit and were unusable. Ditched that brand straight away. Glad they work for you but I’d highly encourage you to look into some other brands

[@Gamer-Drek]

@@MrGunnar177 I’m sorry they didn’t work out for you. I’ve been using it for years and painted well over a thousand models with it. I’m very happy with the products.

[@FullArmorBear]

For that variety of lacquer primer I tend to go 1.5:1 or 2:1 thinner to paint, and spray at around 12-ish psi. With any amount of humidity in the environment it's best to wait 24 hours to let the primer finish fusing to the surface. You can paint over it earlier than that, but for best results to avoid accidental scratching it's best to wait a day.

[@taylorsmith3211]

I had to try this stuff out for myself after ninjon introduced it. Took nearly a month for the 400 thinner to show up. Once I tested it out, though...damn. This stuff really is magical. Just make sure to order the thinner bottle earlier before running out!

[@brushforhire]

Been using this primer for years, and cannot recommend it enough.

[@cbradquillen]

If I recall correctly, organic solvents demyelinate neurons. It would certainly be best to use a fume hood. I am not sure the precise value of neurons in cash, but if you're going to use these things the fume hood would be money well spent. I'm a patron of yours, and I endorse using some of that Patreon money for the hood :). EDIT: you might get good results if you can get the proper filter for an airbrush booth...???

[@RochelleHasTooManyHobbies]

I can't get you a precise value of neurons either, but if you have to spend the last few years of your life in a memory care facility, that'll run you at least $6k/month or $360,000 over 5 years. So they're worth at LEAST that.

[@wearestardust5376]

Yes. Seriously nasty.

[@aerynmusick4548]

Their spray cans are awesome too. A Mr Hobby or Tamiya spray can iis buttery smooth and you have almost as much control as with an airbrush.

[@Beets82]

I think cracking open a new pot of Mr hobby surfacer is my favourite smell - but definitely don't inhale deep. Mr hobby is a great brand.

[@Discount_Llama]

One of the most fun things about working with Lacquers is that your regular thinner is also your cleaning material, saves a lot of time lol

[@mightyblowstudio]

I used some of the black primer over plastic space marines parts as a test. the primer sure is amazing at sticking to the model and doesnt come off. the issue I have is brush painting acrylics on top they just dont stick. its comes off real easy.

[@VinceVenturella]

You could always hit it with a matte varnish or something. That will solve the issue.

[@mightyblowstudio]

@@VinceVenturella Interestingly I was doing a bit of testing and it really doesn't like the warpaints fanatic paints being used over the top. It kinda feels like the paints reacts with it and it turns them 'gummy'. Even with a matte varnish over the top after. It's very strange. I can scratch it off real easy and it goes down to the bare plastic too taking off the primer. Using Citadel paints is much less of a problem. They feel quite solid on there. Some additive in the fanatic range is affecting it it would seem 🤔 I'll do some more testing

[@Nosferatuklown]

Most all of Tamiya and Mr. Hobby paints are so nice to use in an airbrush, even their acrylic lineups...we in the miniature wargaming world are really behind the times when it comes to the Gunpla modeler's tools and paints.

[@shadowedsnipa]

Another tip for those who live in a dry environment: Mr. Hobby makes a retarder called "Mr. Retarder". The "leveling" thinner already has some of this in it, but I find a couple extra drops can be super useful for getting a smooth result on particularly dry days. Also, if you also use your airbrush with typical water based acrylics, make absolutely sure you have done a super deep clean of your airbrush before swapping to a lacquer based paint like this. I find that when the lacquer thinner contacts a dried up water based acrylic paint it gets extremely gunky and nearly ruined my airbrush. To alieviate this, I now have a second, cheaper, airbrush that I use exclusively for lacquers, and my nicer airbrush is exclusively for water based acrylics. Lastly, after cleaning my airbrush with generic lacquer thinner, I like to do one last quick clean with "Mr. Tool Cleaner". This is like an extra extra strong version of the Mr. Color thinner that helps get out the last remnants of paint that stubbornly stayed in my airbrush. Once I started using this, I significantly cut down on the number of times I had to dismantle and deep clean my airbrush.

[@kiaralong9668]

Thanks for the detailed how-to on this. Should I use my cheap airbrush so it doesn't errode the seals on my HS?

[@VinceVenturella]

I use a dedicated, cheaper primer airbrush just to avoid any gunking.

[@christophgoedel]

The primer coat can be sanded and polished as well, which is a huge plus in some cases

[@cooleosis1]

what airbrush booth do you have? i made a cheap thing out of plywood with a 100cfm fan sucking out the back, hope it's enough for fumes

[@VinceVenturella]

One of the fold up ones with a Hepa filter.

[@andreaspaoletti141]

Thank you for addressing MrHobby Primer. I became very interested in it after seeing it on Ninjon's channel. Toxicity is a concern for me, and it means I will likely avoid using it. However, I'm even more interested in Tamiya X-20A as a thinner for airbrushing. The almost instant drying effect looks spectacular in Sergio Calvo's videos. Are you thinning with Tamiya X-20A? Are you taking similar precautions due to its toxicity?

[@NicholasBeadle]

One note about thinners, if you want a little more matte finish use Mr.Color Thinner not levelling one. And the number in this case 400 is just the bottle size in ml.

[@xenoterracide]

Seeing this I would love to have you do a tutorial/review of AKA interactives two-part varnishes. Which are also incredibly toxic. They are supposed to be more durable and run through an airbrush.

[@McMcEnio]

Vince wearing mask - "Mumbled voice" Me - "Bless the Omnissiah!"

[@jesse-got-dolphins-into-heaven]

i never saw a link to your airbrush cleaning video

[@VinceVenturella]

My apologies, here you go - kzbin.info/www/bejne/r3ase6ZnmJmVqbM&pp=gAQBiAQB

[@fkntwizted]

I use Mr. Surfacers 1500 black and 1200 grey on my BT minis, and they keep up the details.

[@HypothermicIce]

You will need a filter qualified for VOC's (volatile organic chemicals). The usual N95, HEPA, or airbrush booth only really take care of small particles. They're not sufficient for chemical filtering.

[@DerekMonz]

Hi Vince, I’ve used it to prime aircraft kits at 1-32 scale to check for seams and for checking gaps filled with putty. I’ve also used it in 40c plus temp at 100% humidity (northern Australia) summer and it just works. Can you one day do a video about choosing and painting your first warhammer minis? Or maybe a large scale figure?

[@theragingdolphinsmaniac4696]

So i am a scale modeler first and and used to use enamel paints. One thing you have to be careful with when using enamels is they are oil based and dry/cure more slowly than acrylics. The big challenge with that is your wonderful paint job will crack if the primer isn’t fully cured because enamels shrink as they dry. I have found if i wash my models with. 50/50 mix of simple green and water, i dont have adhesion issues with acrylics

[@benstaffordson7163]

I've absolutely fallen in love with it. Given avg humidity is sitting around 75% locally this primer has instantly fixed all my primer woes. I already had a mask certified for VOCs (due to the 3d printer a few metres away from my airbrush), so I already have the right safety gear. And it's just a breeze. Even the white is relatively painless, which is shocking for white. Not that I prime a lot in white, but when 95% of the vehicle is off-white I'd rather start with white and work down (and then back up) over fight my way over black.

[@alun7006]

I use a bit of the MR Hobby stuff, but i absolutely *hate* dealing with the fumes. I prefer to stick to water-based stuff wherever possible. It is bloody good though.

[@MachineGod40000]

- I don't think Vince mentioned it in the vid, but any excess enamel/lacquer paint or thinner should not be dumped down your sink. Soke it up with paper towel and throw it in the trash, or if you will have a lot of thinner used for cleaner put it in a glass jar and you'll need to take it to hazardous waste disposal day in your area (or equivalent). Excess paint could also just be dumped back into your paint pot. - A lot of Gundam modelers will take one of these jars and dump it into a larger dropper bottle. Then pre-thin it so they don't have to mix it every time they prime. - A covid KN95 mask is not good enough for your lungs. They are great for dust protection when sanding and trimming plastic and resin. But for paint spraying you should have a respirator with filters for chemical fumes like Vince is wearing at the start. - Lacquer sprayed minis still smell for quite awhile, probably best to let them offgas for a day or so before painting.

[@johnteixeira1791]

So the paper towel in the trash, I don't need to take that to hazardous waste disposal right? Only if it's enough to put in a jar?

[@WhiteWulfe]

The only reason I haven't picked up GSI Creos paints and primers is I know my booth can't handle it, and I want a recirculating setup, so odds are I'll just pick up an inline fan with a charcoal filter which will hopefully do enough to be able to handle such. With how our place is set up, and the condo board's rules, it's difficult to exhaust a booth outside.