BEST TRUCK BED STORAGE SYSTEM! ORGANIZE YOUR TRUCK, VAN, OR SUV

Large areas like the bed of your truck provide an amazing amount of storage and hauling space. But it also leave a lot of room for smaller items to roll around and make a mess. I have been looking for a good solution for my detailing truck to keep some of the items like my generator in place and prevent it from moving around. After a but of searching on Amazon for something that would work, I came across the TMAT. In todays video, I will show you exactly what this is and install it in my truck to find out if this is the perfect solution for you car, truck, van, or suv storage... ENJOY!!!
See the items I use and join the mailing list at: www.DTLRsupply.com
Products in this video:
TMAT on Amazon - amzn.to/443scrn
TMAT Website - www.tmat.com/
TIME CODES:
0:00 - BEST TRUCK BED STORAGE SYSTEM
0:25 - ORGANIZE YOUR TRUCK, VAN, OR SUV
0:40 - TMAT TRUCK BED MAT
3:54 - UNBOXING
5:00 - DETAILING TRUCK SET UP
7:56 - INSTALLATION
9:15 - TRIMMING THE TILES?
10:18 - END TRIM PIECES
14:51 - CURRENT LAYOUT
15:43 - FINAL THOUGHTS
#truckstoragesystem #detailingtruck #carorganizer #tmat #cardetailing #truckbed
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV).

[@philipheilman5413]

This seems like a really good find. Nice job Josh.

[@imjoshv]

Thanks! Yea I was pretty excited about it! The company reached out to me and let me know the trim oieces that didnt fit was a bad batch and they are sending me some replacements!

[@JulesDetailingServices]

Really dig the concept. Wondering how it would fair in a utility trailer. If they're meant to go in a truck bed I would assume it would be the same. Would still have anchors/tie downs mounted through a trailers flooring for extra security. Can never be too safe!

[@SoCleenDetailing]

Awesome review, Josh! I'll have to add this on my Amazon list to get! That looks like an awesome solution for my detail rig!

[@dutchtech]

Thanks for this video Josh

[@JamieTheCleaner]

Yoooooo this is awesome!

[@Madcarcareproducts]

Organization is key! Nothing worse than wasting time trying to find things you need!

[@Enthusiast_detailing]

That’s looks so cool!

[@wilfredgomez2632]

Looks very nice. I’ll be waiting for the pw hose reel bc I’m in need of one of those. I got one through Alibaba but so big n heavy and bc I rolled the hose in wrongly I damage the spring. :( I just bought the Kobrajet blue smooth jacket 50’ hope it fits on that reel you have. Ty Josh.

[@carbonlord]

Awesome Video, they were super cool. When are you doing a studio/garage tour, your home is beautiful. PS what are the side compartments on your truck used for?

[@tombrown1032]

Great video. What brand of spray bottles do you use? I checked your website and didn’t see anything. Thx!

[@VeerChoudhary-tj2vh]

Heyy...what if you add ryobi one+ water transfer pump to active 2.0 that will make psi more right?

[@VeerChoudhary-tj2vh]

Heyy if we add ryobi one+ water transfer pump to active 2.0 it will work ryt?

[@PrimaDetailing]

i wish it was less expensive D: i want it. Might make a wood DIY type.

[@VeerChoudhary-tj2vh]

Heyy if we add ryobi one+ water transfer pump to active 2.0 it will work ryt? I mean rather thn using garden hose we can use water pump and bucket ryt?

[@boskosdoghouse]

Nice!

[@zachf6256]

Awesome Josh. Looks like a very practical solution that will help ensure everything stays where it should. I’m assuming that your washer is gravity fed? With the additional weight in the back do you have an “add a leaf” leaf spring? For myself, I don’t however I don’t carry nearly as much in my truck bed. I did however install Timbren SES bump stops and they helped tremendously for when I am loaded down. I looked at Firestone ride height airbags but wanted the maintenance free option. Have a great evening

[@imjoshv]

Yes I actually have an airbag system on my truck. I used to use a smaller truck with that same tank and never added anything. It had a little sag but not bad. I think since it’s pushed up against the cab end it’s not so bad

[@vinceriggio72]

The side pieces look to be installed by stratling the seams rather than being in line with each square.?

[@imjoshv]

The company reached out to me and actually said they did have a bad batch of those so they are sending me some replacements!

[@Darthbreesus]

Sir! I just purchased the vacmaster 3 in 1. This one is a 6 gallon. Has everything your original video has accessories wise. Except! The small extractor is more like the Bissell extractor. Smaller stuff agitator brush not made of that recycled garbage can plastic like the original and the Hart. And it has a 1.5 gallon reservoir I think the others were 1 gallon can't remember off the top. And it's set up is more like the Hart. It's on Amazon for 135 currently I got it in yesterday. Thought it'd make good content.

[@enforcedwolf643]

Looks like a good and useful product also do you know when the MJJC foam Cannon Pro v3 is coming out yet?

[@imjoshv]

They are feeling me around may/june… I hope

[@CaliforniaCasey]

Rad!

[@davidcrowson4745]

If you staggered the tiles it would have made a stronger fit.

[@KernCostelow]

where you need space on the slides, instead of cutting, what if you just used a whole square and just clicked them in 3 rows over? seems all you needed were 3 X rows on each side? can you offset the way they click in? JM2Cents

[@imjoshv]

I guess i could have, but i think its actually designed to fit between the wheel arches so I wanted to do it that way. And i wanted to test cutting them to see if that was an option. Good idea though!!!

[@KernCostelow]

@imjoshv Not sure if you have seen it or not, wallmart now has those rolls of microfiber in 15.5x15.5 size now. Also a 100 pack for $24. Just an FYI if you weren't aware.

[@stevel3881]

Are there screw holes in the big tiles? The bow will be gone once you screw down the end pieces won't it?

[@imjoshv]

The company actually just reached out to me and said they had a bad batch where it was off slightly like the ones I got. They are actually sending me some replacements that line up correctly!

[@stevel3881]

@@imjoshv nice. These remind me of Tool Grid for tool boxes. Do the big tiles have holes to run screws down the through? Do the attachments just lock in or are like a pressure fit?

[@maga5381]

What model is that vacuum? I have something similar, though your color/aesthetics are a bit different.

[@imjoshv]

Here you go: amzn.to/3VZiPXK Its the same thing but in different colors available on Amazon

[@dtna]

Is there a reason why you didn't use the Uberflex hose on your hose reel in your van?

[@imjoshv]

That hose reel comes with that hose and the company makes all the components. I still might switch to an uberflex but the hose it comes with is very industrial

[@allanpontiere6177]

Hi I am new your channel and just subscribed. I saw an older video comparing little pressure washers and decided to buy on your recommendation the Ryobi 1600 electric. My Home Depot only had the 1800 for 99.00. Is this a new model and better? Or should I go with the 1600 which for me is only available on Amazon. BTW both of them are quite a bit more expensive on Amazon. The 1600 is 169.00 and oddly enough the 1800 is about 20 bucks cheaper. Thanks. Really enjoy your vids on car detailing !!

[@fabiansaldana3142]

The 1800 is the same as the 1600, ryobi discontinued the 1600

[@allanpontiere6177]

Thanks !

[@Madcarcareproducts]

Get rid of the crappy hose and upgrade you won’t regret it those cheap hoses are the worst!

[@allanpontiere6177]

Yep already did that ! Also purchased the new 3.0 foam cannon and the 2.5 orafice. Can’t wait to try everything

[@KennyAustin1]

Oh man, those strips should fit correctly. There was a batch that was just a fraction of a mm longer so they fit individually when testing but when lined up like you did, they get off-center from the notches. Total mistake. Got it fixed. Anyone who has this issue should reach out via email, social, or call and they'll get swapped right out for free. P.S. The mold for the strips is getting textured right now. (I work with Tmat)

[@johndaddabbo9383]

A no-go for any open bed truck because there's no drainage!

[@imjoshv]

Great point! I honestly didnt even consider that. I have the shell on mine and our other truck has a tonneau... But yes you are right about that.

[@NotUpdated005]

I emailed the folks at Tmat and the response I got was that they are made in ohio

[@kevinlondon8340]

You should put the hose reels on the door so that it easier to pull out when needed. And give you more space on the floor

[@CatRichardBojangles]

Won’t water collect in the holes and start to stink? I might have missed that it has drain holes.

[@imjoshv]

no drain holes so yea that could happen. I dont expect alot of water getting in there though since all my hoses and everything are sealed. If any dopes, a quick vacuum should take care of it!

[@alanwilliams5829]

Not sure how well this would work in an open bed where we have winter. Looks like a great way to make x shaped ice cubes though.

[@VeerChoudhary-tj2vh]

Heyy if we add ryobi one+ water transfer pump to active 2.0 it will work ryt?

[@VeerChoudhary-tj2vh]

Heyy if we add ryobi one+ water transfer pump to active 2.0 it will work ryt? I mean rather thn using garden hose we can use water pump and bucket ryt?

[@VeerChoudhary-tj2vh]

Heyy if we add ryobi one+ water transfer pump to active 2.0 it will work ryt? I mean rather thn using garden hose we can use water pump and bucket ryt?

[@VeerChoudhary-tj2vh]

Heyy if we add ryobi one+ water transfer pump to active 2.0 it will work ryt? I mean rather thn using garden hose we can use water pump and bucket ryt?

[@VeerChoudhary-tj2vh]

Heyy if we add ryobi one+ water transfer pump to active 2.0 it will work ryt? I mean rather thn using garden hose we can use water pump and bucket ryt?

[@VeerChoudhary-tj2vh]

Heyy if we add ryobi one+ water transfer pump to active 2.0 it will work ryt? I mean rather thn using garden hose we can use water pump and bucket ryt?