Big Dog hot dog cart

Hot dog cart

[@HotDoggingwithDan]

Very cool! I love that wrap color and you did an amazing job bringing the cart back to life!

[@mrbrisket6794]

That was last year’s restoration.....I just finished another big dog last month

[@GemJones00]

Maryland in the house. I'm in Baltimore, I just brought a cart. 👍😄

[@dontheideaguy]

Great cart walk-thru. Really enjoyed your insights on the cart. I just bought my BigDog Cart from Ben and appreciated seeing how you handled the areas that needed improvement. I would be interested in learning more about how you secure the tanks and if you ever figure out a more efficient way to replace that water heater -- I've been thinking about how to cut thru the shelf...

[@beanpup1]

You made a good cart great! Good job!!!

[@beanpup1]

Great video very informative great job on the upgrades

[@mrbrisket6794]

Thank you I put a lot of time into it

[@ianscianablo8507]

How are you doing? I' never opened. I'm having welding done! Do you think I really need a water heater? My friend says because of the hot copper coil, which runs over the three burners, it's not terrible needed. Any thoughts? Thank you!

[@lindalincicome4142]

Excellent video!! Love the wrap and the modifications you made.I have the Cash Cow hotdog cart…wish I had bought the Big Dog. It has more holding space. Any recommendations on how to modify the Cash Cow to add at least a “half pan” space plus a additional burner.

[@jameshicks8856]

Looks great.❤ it

[@ianscianablo8507]

Been vending for 3 weeks now. This week three days. If you wanted to how could you sell frozen ice cream treats from your Big Dog Cart Coleman cooler? That would be a dream for me!

[@ianscianablo8507]

Hi. How is it going these days? Since we have the very same cart did you still keep the grill on the top like that? Any secrets to keeping the hot dog buns warm without getting hard? I was vending yest day and had to throw away 8 buns! They get hard. Even though I use that dome and nestled the buns between 2 sheets of foil in the perforated pan inside the spillage pan.

[@ianscianablo8507]

Since I have that same cart how is it possible to serve ice cream treats from that Big Cart Coleman cooler? Any thoughts? Ice cubes melt fast in that thing!

[@ianscianablo8507]

Are THOSE three flip tops the same size? What are they? Thank you! Putting it together. Step by step.

[@RegeKa]

Is it cheaper to build your own hotdog cart?

[@ianscianablo8507]

Do you have a problem reigniting the pilots? Will your long handled torch reach into those holes without having to remove the steam table pans?

[@ianscianablo8507]

Hi friend. Well....my brother, who is his own repair man, took hours to fit the new (yet MODIFIED) furl rod & new burners, from Hot Dog Store to my 13 yr old Big Dog Cart. But the 304 panel is fucked! It turned out NOT one of the three propane knobs matched-up to the three holes in the 304 steel panel. How do you keep the chilled condiment station chilled? I notice those ice blankets from Walmart are too thick and those mini pan wells are sticking out of those metal slots. What do you use? I have to keep the chilled condiment station chilled. I want to use it as intended. Any thoughts? Thanks.

[@ianscianablo8507]

Fuel rod.

[@nickg2316]

Beautiful cart man!! Is that a wrap or did you paint it ?

[@mrbrisket6794]

I wrapped it in red chrome …… I restored it frame up

[@ianscianablo8507]

Any thing specific on that roll top? Need to know size. Where did you get perforated pan? Top Dog Carts don't sell them. Do I have to modify if I buy that roll top? I haven't placed my order for the pans yet. Concerned if Hot Dog Cart Store's perforated pan is compatible with the other Top Dog Carts lidded /hinged pans.

[@mrbrisket6794]

Any steam table peforated pan will work I use a 1/2 pan

[@ianscianablo8507]

@@mrbrisket6794 Thank you. LOVE that roll top. Anything specific? Name brand ? Size? It's beautiful. Nice.

[@mrbrisket6794]

Winco roll top

[@GemJones00]

In Maryland, do we have to have a tag on the cart? I read and it didn't say so.

[@mrbrisket6794]

Check with the DMV online

[@ianscianablo8507]

Hi! I wish I could see your cart at night time. I had to leave a very important Tractor Supply gig today. It's wing in upstate, New York. How do you keep your pilot lights on during a windy day? I tried and tried but could not keep my burners lit. I'm always loosing with this business.

[@ianscianablo8507]

Can you please tell me how to order those pans? I have the Big Dog Cart too. I have to replace ALL my pans. My measurements are 38 " x 12". How do I know the flip top roll top will fit? What are the pans, full spillage pans sizes like? Thank you!

[@mrbrisket6794]

Top dog carts in Orlando Florida has the pans. The roll top is winch roll top from Amazon.

[@ianscianablo8507]

@@mrbrisket6794 Thank you but will Top Dog know they would actually fit my Big Dog Cart? I actually have to get all new pans.

[@mrbrisket6794]

@@ianscianablo8507 all pans are standard steam table pans, I use a spillage pan, a hinged 1/3 pan and two, 1/4 hinged pans, and two divider bars. In the spillage pan I have a perferrated 1/2 pan 2 inches deep. The 1/3 and two 1/4 hinged pans are 6 inches deep.

[@janmckittrick1068]

Great Information !!!

[@mrbrisket6794]

Thanks

[@Jammer411]

IM SURE BEN IS SAD FROM YOUR REVIEW OF HIS BIG DOG CART

[@ianscianablo8507]

What dogs do you sell? I'm failing. I want to keep selling Sabrets but too costly.

[@ianscianablo8507]

Hi. Is there ANY other place to put the water heater other than the bread box? ?

[@ianscianablo8507]

Are you happy where the grill is?

[@tonianderson3425]

Do you need a commissary with this cart?

[@mrbrisket6794]

It all depends on the local laws

[@ianscianablo8507]

Hi! I have not opened yet and I make my own sauces. Any advice on preventing my chili , beans and coke/onions from overheating and getting gummed-up? I don't know how much control I will have on the propane units. Thank you!!!

[@888manifestations2]

She's peeerrrrrrty

[@hawgsdogs-hardcorehotdogs1362]

How is your rubber floor covering working out for you?

[@mrbrisket6794]

Good it’s just hard. To clean

[@ianscianablo8507]

How do I clean the 304 stainless steel without destroying it? Can I remove the rust burners and put them in a bag with amonia? Any tips? I gotta open soon. Thank you!

[@mrbrisket6794]

Put your burners in a 3 gallon bucket of evaporust for a day, the stainless steel you can buy a burnishing buffer with wheels on eBay for about $90

[@ianscianablo8507]

@@mrbrisket6794 Thank you!!!!

[@papascateringstreetfood2173]

Did you replace the cart floor with a open metal grate? Road dirt entering the inside from the floor? Do you feel you overpaid for the cart?

[@mrbrisket6794]

I replaced it with stainless with small holes

[@papascateringstreetfood2173]

@@mrbrisket6794 I take it that road dirt is not entering the inside of the cart through the grated floor.

[@mrbrisket6794]

Papa's Catering Street Food you need that area to be open beacouse of the propane tanks.... gas leaks

[@papascateringstreetfood2173]

@@mrbrisket6794 THX, my carts have a solid floor made of aluminum diamond plate with the rough side down. QUESTION: Does dirt get access to the inside of the cart? The bottom of my carts becomes filthy after long drives. I vend in the winter months where there is SNOW on the road. I am trying to ascertain whether modifying my carts to store the propane tanks in the interior of the box should be made.THX

[@mrbrisket6794]

Papa's Catering Street Food not that dirty I don’t drive on dirt roads

[@ianscianablo8507]

Hey Mr. Brisket! My Big Dog Cart is now in the welder's shop. Question: Have u ever cooked the dogs, grill them and then put them in the steamer for holding? I ask because Michael, in another video does that. "Michael Explains Pan Set Up Hot Dog Cart" video Sept 2020. Want your opinion!

[@ianscianablo8507]

Hi! Is there a way to keep the propane tanks outside the cart? It's too dark under there. Can't see a thing!

[@mrbrisket6794]

Yeah just put them outside

[@ianscianablo8507]

@@mrbrisket6794 Did you? Put them beneath the chilled condiment side? I just got my mobile food permit. I'm wondering if THAT is cause me more trouble. How do you handle those propane tanks when their under the cart?

[@ianscianablo8507]

Hi! I just bought a new fuel rod for my 10 year old Big Dog Cart. I have a propane leak where my third burner is. But thiis new fuel rod from Bens Cart doesn't fit, Any thoughts? I don't think I will ever open up.

[@mrbrisket6794]

I really don’t understand what you mean…sorry does it not open at the valve nob area ?

[@mrbrisket6794]

You may need to make the hole bigger where the adjusting nob goes through……

[@ianscianablo8507]

@@mrbrisket6794 It's a big dog cart from 10 yrs ago? Are those fuel rods adjustable? It looks a lot different from that old rust rod in the cart. The three burners are evenly spaced from each other but the knobs on this rod are way off! What would you do? I can't make parts.

[@mrbrisket6794]

Make the holes in the front panel bigger or send it back and get another fuel rail. The quality on these carts suck

[@ianscianablo8507]

@@mrbrisket6794 I could tell you that! All from China. But I'll need a welder. This is 304 stainless steel. Do you think a plumber can do this job?

[@Jammer411]

WHY NOT MAKE YOUR OWN CARTS AND SELL THEM??

[@mrbrisket6794]

I may in the future…… they are not hard to make

[@ianscianablo8507]

Hi! Are you still selling dogs? It's nothing to be ashamed of if you're not. I had a terrible summer. Giving-up! My Big Dog Cart is a cancer!!! It failed me! We had to canabalize three couplers for the tow bar JUST to barely make it home. Now I need a sledge hammer to lossen it up to disconnect so I can put the @&$%^#* cart into my shed!

[@Catherine22518]

Ian, are you selling hot dogs still, if so how’s it going?

[@ianscianablo8507]

Do you REALLY need that water heater? I never use those worthless sinks.

[@mrbrisket6794]

No get rid of them

[@ianscianablo8507]

@@mrbrisket6794 Thank you! The ONLY part to my cart that isn't total crap is the bread box! I can't even control those propane knobs! I'm vending in Otsego county, upstate NY and it's awful! No customers! And those Top Dawgs lidded pans with the knobs-disgusting! They look gross already and knobs fall off!