Scrapyard Bullion Bars - Copper Brass Aluminum - ASMR Metal Melting - Trash To Treasure - BigStackD

Bugger me this little piece was chock full of the good stuff. So satisfying finding pure copper windings and not the cheap copper coated aluminium windings. A huge haul today for the stack and a heap of fun pours so sit back relax and enjoy the extra long video . And have an unbelievably awesome day!!
Now if you Feel like supporting the channel it wont cost you a cent and that is to play one of my playlists on your computer before you walk away from it and let it play through that really helps as ads will play and watch time will go up . Watching ads definitely helps but Don’t ever feel as though you need to watch the ads if you don’t want to simply skip them and move into the video it’s completely up to you and I understand if you don’t have the time to do so👌🏻😁👍🏻.
TOTAL VAULT VALUE VIDEO 2024 $$$$$
• Total Vault Value 2024...
Get 20% OFF RINGS & BRACLETS simply by going to the web site here
gthic.com/?aff=27
Also To get 20% off Simply use the code word DION25 on the same link
gthic.com/?aff=27
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
******
**********
5% Off a furnace ,Burner, Full set up or Forge and a heap of start up info and links email me on [e-mail]
*******
BIGSTACKD POPULAR PLAYLISTS
COPPER & BRASS CASTING
• Copper and Brass melting
COIN CASTING
• Coin Casting BigStackD
BIG BARS
• Big Bars By BigstackD
TRASH TO TREASURE
• TRASH TO TREASURE
ALLOY CASTING
• BigStackD Alloy Making
***
BigStackD Merch Link
bigstackd-cast...
***
Follow me on Facebook & Instagram for more vids and behind the scene stuff.
/ bigstackd-casting-2935...
www.instagram....
***
461KG Motor Melt Down
• 461KG Massive Motor Me...
****
ORIGINAL STEAM EXPLOSION VIDEO
• Home Foundry Steam Exp...
******
BigStackD DUST MELT
• Metal Dust Melt Down -...
*****
LIFTER BUILD VIDEO
• WHATS THE TOTAL START ...
*******
AWESOME CUSTOM STEEL STAMPS FROM ALINA
www.etsy.com/s...
******
I also have a post office address below in case anyone wants to send a letter or something and I will open my fan mail in future videos (as long as its channel friendly) I really love letters. Just be sure to add your online KZbin name and or email address. .
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
****
********DISCLAIMER****DO NOT TRY THIS AT HOME****
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
*******
My other 400+ videos
/ bigstackd
********
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
• Forging Crucible Tongs...
****
Forge supplied by my friends at Devil-Forge.
Dont forget to email me for a 5% discount link and a heap of info to get you Started😁
*****
10% OFF COIN MOLDS & CUSTOM COIN MOLDS LAS VEGAS USE CODE BIGD10 - ArtByAdrock
artbyadrock.com
FURNACE SETUP 4KG
• Copper melting in bran...
FURNACE SETUP 10KG
• Devil Forge 10 kg Ligh...
GAS USAGE AND SPEED COMPARISONS ON ALL 4 DEVIL-FORGE FURNACES
• 4 Melts 4 Pours 4 Poun...
WHAT YOU NEED TO START MELTING METAL including LIFTER AND TONG BUILD
• WHATS THE TOTAL START ...
******
HOW I MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it.
****
#bigstackDCasting
#asmr
#starwars
#MeltingCopper
#MeltingMetal
#bigStackD
#TrashToTreasure
#dumpsterdiving
#scrapyard
#Dumpster Diving
#scrapmetalrecycling
#trashtotreasure
#goldbullion
#bullion
#nordicgold
#copper
#bismuth
#bullet
#gold
#351
#Ford
#cleveland
#v8
Scrapyard Bullion Bars - Copper Brass Aluminum - ASMR Metal Melting - Trash To Treasure - BigStackD

[@bigstackD]

As I say in the vid today, thanks to all you awesome People for your continual support I really appreciate it and you guys and gals are the best. Now Today an awesome haul for the stack plenty of copper brass and Aluminium. So sit back relax. Enjoy the video and I can’t wait to see you all in next Fridays video.👋🏻😁

[@Biorx8]

Hi, @5:57 this are condensers.... be very carefull with this, ok, this ones are old, but in general, this stuff can be lethal

[@HowYouKFC]

When’s the 1000kg motor melt that you tease us with in the background 🥺

[@johnnykerley4791]

I just purchased my first devil forge.i will do first light this Saturday. It's a 10 kilo. My question for you is , what MPa do you use for copper and aluminum?

[@ChristianFeldmann-h8s]

More big electric scrap

[@bigstackD]

@johnnykerley4791 ----- REGULATOR SET POINT and adjustments 0.12MPa Copper 0.10MPa Brass / Bronzes 0.08MPa Aluminium I set the regulator at 0.10MPa for brass and when it gets up closer to its melting point I backed the furnace off to 0.08MPa or even lower to make sure I don’t accidentally overheat the brass and burn off the zinc.

[@Anonym-yr4qn]

Perfect ASMR and sleep-in content. No talking, no weird shit, just relaxing content.

[@CanisAnubis]

I'm not an electrician, but I played one in the Navy (no degree or tradesman's rank, is what I mean) - those look like capacitors. And once you showed the label on the side, it confirmed it. The "uF" is microfarads which is the SI symbol and measurement for capacitance. So just to be safe, I did a quick search and found other similar ones that I can't post a link to here due to YT spam-filters, but they're out there. :) No drop bears today. Just drop-capacitors! Also, those super thin copper bar pours are just doin' it for me. Eye pleasing and soul quenching! Love it!

[@robertsnowdon6932]

There were so Drop Bears today and they were near the start of the Video.

[@aidenwallin3523]

I caught the microFarad label too. Definitely capacitors of some type. You probably know more about them than me, but I recognized the shape and the unit from all of Backyard Scientist's giant capacitor bank experiments.

[@johnarmenta2199]

Yeah - 8 micro-Ferads, 440V. Those could fetch some beer money on ebay.

[@johnarmenta2199]

​@@robertsnowdon6932 - From Wiki: The drop bear (sometimes dropbear) is a hoax in contemporary Australian folklore featuring a predatory, carnivorous version of the koala. This imaginary animal is commonly spoken about in tall tales designed to scare tourists. While koalas are typically docile herbivores (and are not bears), drop bears are described as unusually large and vicious marsupials that inhabit treetops and attack unsuspecting people (or other prey) that walk beneath them by dropping onto their heads from above

[@nolanworkman4306]

Looks to be ganged together to make one big capacitor.

[@Ironman829]

You know it's a good video when 0:01 in and you see a clean copper pour

[@michalledick8281]

Mate your asmr in the past month has been outstanding. I have watched each episode several times, because you are putting me to sleep. Not because you are boring or nothing at all like that. I watch your videos because the calm me down, (ptsd) It is such a pleasure to get to watch you.

[@dan725]

It’s Friday late morning, and I’m on my break. what a great way to break up my day by starting this video :). I’ll be watching bits of it throughout my work day, and be done before I head back home. Always an awesome way to be reminded it’s Friday :). It has become a personal tradition now. Friday? BigstackD video to start yet another great weekend :). I’m also loving the nighttime copper pours! The bright red hot colors are so cool! Again, a big thank you to our best Aussie friend BigStackD for taking the time to make these videos for us!

[@andymitts251]

It's amazing how carefully you were able to remove all that varnish. And making the aluminum crucible-ready was some magnificent workmanship.

[@Marta-bb1dv]

You are just so authentic, so real, I can imagine people appreciate that about you, so do I, and I look forward to your loooooong video every Friday. Best regards 🤗🤗🤗

[@hoopsm6106]

I love the copper melts so much, especially the green fire 😮

[@t-race6023]

Oh Boy I ❤ these longer ones !!! 😍

[@DarthTrollage]

Me too!

[@rpaul4656]

I’m sorry, but…. That’s what she said 😂

[@DarthTrollage]

@@rpaul4656 goofy

[@mudgem3742]

Love that green flame! And seeing the boys again.

[@trebor217]

…super right way to appreciate our everyday metals…thank you…

[@eyetok_alot]

i think it would be fun to watch if you find an old enigine from a car. A complete one, take it appart, starter, dynamo, alu head, and maybe alu block, and melt and mix everything that melts. See what comes from that.

[@robertbauer8867]

Nice haul. Love the copper as it cools. And really love your dogs. Sweet guys.

[@claywest9528]

Love it when the big molds are used. Especially with copper!

[@shaquille.oatmeal9934]

You should do more nighttime videos. The crickets in the background, the gravel.. it's really nice. It reminds me of camping when I was a kid

[@rileyk99]

Bullion *is* speed! Ingot is just adorable.

[@reverendtfg6802]

@7:59 *The majestic Australian White Ibis, aka the 'Bin Chicken'.* 😆😆😆

[@veritasfiles]

That was a funny engine bit with the dogs there at the end. 🤣😂

[@godofthecorn3011]

watching you take apart that transformer was captivating. Great editing.

[@scrumlass]

15:55 This man lives in the EPICENTER of Jurassic Park. Change my mind.

[@seanwilley9831]

What is that noise from?

[@metzger2863]

I also want to know!​@@seanwilley9831

[@spellbyte31]

@@seanwilley9831 it sounds like its straight outta pitch black

[@tanyahardman4321]

​@@seanwilley9831 the drop bears and bunyips are coming

[@2dronetek2]

It's terrifying.. I'm convinced it's monsters.

[@solargarage]

Nice haul, beautiful looking mirrored bars. The mold your mate made is making some nice looking bars.

[@gregorykrug8034]

I am digging the sound effects when the dogs were running.

[@justinreynolds1201]

Always enjoy watching everyone of the pours, Nordic gold is my favorite to watch.

[@danielsears5959]

Good Morning from South Africa. Love your vids and socks!

[@MrHitchikerOz]

30:10 Glad you went back for the piece of copper that was trying to make a break for it - my OCD was going bananas!!

[@limeroundup]

Love the percussive disassembly by the way 😂

[@gumbymf5027]

5:54. To answer your question. (12 year ac tradesman). Capacitors. Usually filled with mineral oil and I think wax paper with some kind of metal. Not 100% sure on what metal but 100% mineral oil in each. Also, thank you for making vids. Keep up the great work. Respect.

[@gaspode42able]

Thankfully they have the discharge resistor across the terminals to keep them safe. Without that, those can keep a charge almost forever and could be dangerous in the wrong situation. The capacitors appear to be 3 x 8 uF in parallel which is 24 uF at a 440V rating and could give you a bit of a surprise if not discharged. The resistor is a 6.8K (blue - 6, grey - 8, red - x100 = 6800 = 6.8k) probably a 2 watt (hard to tell exactly) which is to slowly discharge the capacitors once power is removed.

[@gaspode42able]

From what I could dig up, the Ducon GPM series is a paper-electrolyte capacitor so apart from the can, there's likely no melt-ables inside and may even possibly contain PCB ( polychlorinated biphenyls) so best leave them intact. www.nepc.gov.au/sites/default/files/2022-09/anzecc-gl-identification-pcb-containing-capacitors-information-booklet-electricians-and-electrical.pdf

[@Steelythestacker]

Yes capacitors can be ⚡⚡⚡ dangerous. Those have a way to discharge but many do not. Always short out the outputs on them with an electricians screwdriver or lineman's pliers before doing anything further. Something that is well insulated. Caps that size can kill a man fairly easily if fully charged. Not to be trifled with for sure.

[@langer1972]

That green flame is cool.

[@TheWabbit]

That was a load of meltables! Some really nice copper and the thick aluminum, and even some good brass. All in a small package. They made some good looking bars! Were still struggling in the Midwest to get half the temperture you are, plus were getting a ton of rain, Michigan is missing the tornado's though since it's too chilly yet, just 100 miles south though its warm enough and they have had a few. I hope everyone has a wonderful weekend, nothing like a good BigstackD video to get friday off to a good start with the weekend fingertips away!

[@nobodyimportant8811]

I love the green flame from the copper melt😊

[@lordicyn8035]

Thank you so much man! Been watching your videos for years. Finally got all the stuff to start casting myself about a year ago 😀

[@whitetop11]

Great melts, them big bars came out great. Love the boys and birds 😊 would love those parrots here if you dont want them 😂

[@AnthonySmith-hr2kp]

Nice video, love see the poured bars results, love the cooling ripples. Nice to see Ingot and Bullion, cute puppies. Made me laugh at the end with the race car and oldbeater. I watched that part 3 times. I'm still smiling about that. Great video. See ya next friday. Thanks again!!

[@bigstackD]

Appreciate that, yes, I thought a lot of people would know it’s exactly right for these two little monkeys👊🏻😁.

[@KevinLyons-gn7eu]

@@bigstackD what is your age name? How old is your kids?

[@gavinlottering]

I melted my first bar of aluminum (yesterday) thanks to this channel.

[@notsure5425]

I love how the steam scrubs the ingots!😊

[@watermenplumbingfiltration144]

WOW that Neon green from the first melt ! amazing

[@leehenry1165]

Glad I don't have to worry about those Drop Bears!

[@mitchou061]

Bonjour, je vous ai découvert, par hasard, sur KZbin et j'ai adoré. Je me suis abonné et je passe mon temps libre à regarder vos videos et toutes les publicités, car je sais que cette rémunération est indispensable . Continuez à nous divertir. Un grand MERCI

[@BillMulholland1]

Happy Friday D and everyone! On last break at work. I’ll be back 👍

[@fabriciobaumgartner4532]

I love the color that copper gives to the fire It's a very pretty green

[@reaper7jl89]

My new all time favourite, Nr.1 & best aluminium pour i have seen. The aluminiums smoothness appears to be, unreal including out of this world👌🤯👍👌😁👍 Ur friend really😁👍 knows how to, weld together steel to become topnotch and high quality designs.

[@urnotmyfather8322]

CONGRATS on smashing through 3k lbs.!!!🎉 Still the best part of waking up on Fridays.

[@francescaknightYT]

Little doggo always makes me laugh how he always rubs his junk all over the outside rug 😂🐾

[@josephcormier5974]

Thank you for another enjoyable Friday morning and an awesome amount added to the stack keep up the great work six stars brother

[@brianberkompas9039]

Seeing that green flame would be beautiful to see in a nighttime melt

[@timsmith9645]

Awesome video nice copper and aluminum and brass bar's thanks for sharing bigstackd

[@yado74]

Hello, I'm always happy to see you. I also made a burner, and next time I'm thinking of making a small and light furnace. Thank you for your help, please keep up the good work.

[@DarthTrollage]

You're a wonderful constant of the end of my weeks

[@ThornM15]

Ah Fridays, the best day ever.

[@noiseosoutros]

thank you my friend

[@scottgm321]

I love the green flames. Thanks for the video.

[@N0artist]

Hi from France ! I'm looking to your melts since a year and just wanted to say you that I like it, sometimes, one of you videos pops in my list, and it's always a nice moment to see it. I'm not a fan of "regular" ASMR, but you made something else, sometimes I just wait for the huge steak-time, sometimes for the dog-time, and I'm always fascinated by the different metals you pour. Not only the incredible vault you stacked, but also the physical properties during the melting process. Satisfying ice cooling or boiling ingots !!! Keep creating, that's pretty hypnotizing ;)

[@Jakob-j7y]

wow. more than 3.000 lbs..... you DID a big work until today- dude! great job!😊

[@nicrodel]

Hell yeah, the thin copper plates are really badass for some reason

[@scottwhitmer2034]

Capaciters like batteries for a quick start to a motor!

[@Randomsydneytrains]

Nice melt, Always love and ice block melt!

[@dennisgannon]

Love the music. It is before my era, but it is comforting. Howdy from Oregon USA. Clean and green, and often wet.

[@josephpedone2004]

That aluminum was much better than last week’s (soda cans) … happy Friday, have a great weekend 😎👍

[@tarakelf7014]

Absolutely love these long videos keep em coming 💕👍😁Xxx🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@alonys]

Those aluminium bars are so beautiful!

[@johngy6296]

Would love to see one of your larger bars, milled and polished to perfection on all sides, or maybe if a copper bar, leave the top rough to kind of show the contrast of what lies beneath. Always love your content and look forward to starting the weekend off right with your latest video.

[@25vrd48]

ASMR at it's best .

[@lyleslaton3086]

9;47- you've got it bad dude. Jonesin for a copper melt. Keep it up, always a good show.

[@nexarian2523]

Sounds like your friend on the melt phone lives a pretty interesting life. The sugar bowl of co.... erm... happy dust is a nice touch. 😉

[@brucejenner5856]

Many thanks 👍

[@Gretchen1978]

those dropbears sound scary!😂

[@Matthew-ld9wx]

i really enjoy this stuff. just perfect

[@YukonTV]

I cannot thank you enough for ditching the hot rod sounds when you drive. Thank you thank you.

[@bigstackD]

No problems mate it will come back in to play but only to annoy my friends. it won’t ever come back again with any more Can crushing. I can guarantee you that. I had quite a few comments about people saying I should’ve left it out which is completely right. I just put it all together and then didn’t even think to delete the sound, but again, it’s just a piss off a couple of my buddies for reasons I’ve said before, but no point getting into it now👊🏻😁🍻🍻.

[@AlbiniusCristi-zm8vb]

I think he made that new chime on his sanyo, that he has been using. But I dont Know. I agree nontheless. I love it too!

[@branmanhosmaniac3489]

What's wrong with the hot rod noises, I think it's funny

[@AlbiniusCristi-zm8vb]

@@branmanhosmaniac3489 they always made me laugh too.

[@jimrustle643]

That beautiful copper pour had me from the beginning. Nice work as always 👍🏻

[@randydobson1863]

hello BigstackD Casting & it's is Randy and i like yours video is cool & Thanks BigstackD Casting & Friends Randy

[@hambrederolhambrederol9278]

Nice Cooper I-Bricks.

[@Frank-vx5pc]

I love watching your KZbin channel. Especially your beautiful dogs

[@benbrown7142]

4:54 I love the sound of aluminum!!!!!!!!

[@donscottvansandt4139]

Gotta love that green flame!

[@bxmachine]

The grean flame from the first copper melt was very😎😎😎😎👍

[@entity9742]

15:55 dude i wouldn't even go outside if i heard that You got some wild critters there

[@abctractvertigo7439]

U sir are the best at smelty melty awesomeness

[@Kalashnikova762by39]

We need to get a petition started to outlaw flathead screws worldwide.

[@iandrew6347]

As well Poz drives make all screws a Allan key type then you would get a all round purchase on the screw

[@againstthegrain147]

I think square headed screws should also be banned

[@markinator8826]

AMEN

[@rockysquirrel4776]

They know what they've done.

[@PuppyPrincess]

But, and hear me out, they're the screw that you're least likely to strip. While I hate them too, I think they're really good

[@Vladivostok25rus]

Обожаю твои слитки!

[@darkaxel1991]

I've taken to pre-roasting varnished copper. Hit it with a heat just high enough to burn off the varnish. I do the same to roast the liners and paint off of aluminum cans. I got the idea from a documentary about an aluminum recycling plant.

[@ricardoderobles9494]

Nice melt made a good amount of copper. With aluminum. Look good. Keep doing what you do awesome. Watch from USA. Houston Texas.

[@ArtemkaPannat]

Video watched start to finish, ads watched through and allowed to time-out, all I have to do is wait until next Friday for my next melting fix ... I am not addicted, I can stop anytime I want, I just don't want to .. *scratches clicking finger

[@HjellumInc]

Great melt this week, brother!

[@GrumpyDart]

Watching a bit of teardown asmr to help my insomnia. Finishing the rest tomorrow.

[@Screwcharger85]

Love this channel! Always look forward to a melt every Friday ! , but I have to say it this out loud because of the track 22:35 RICHIE!!!!!!!!!!!!!!!!

[@rip6747]

I like learning about the birds in Australia

[@tinacasarotto1264]

LOL Australia is something out of a Dr. Suess book!

[@よつバード]

10:05 green! I like green frames too:)

[@kcirtaP_ereiviR]

I love the GTA phone call😂😂😂!!! I always get hungry when I watch the BignasckD time!! Maybe a BignaskD channel will “soon” be on KZbin??

[@zelos1826]

It’s that time of week again! 💙

[@Ank502]

Oh man, I love that Leidenfrost Effect starting at 15:14.

[@ianbooth9289]

All my star screwdrivers are toast. Now you know why I prefer flat heads

[@marcmccall237]

A while back on your outboard video, then on your weedeater video and now this one got me to thinking that you need a small metal muncher, like the ones they use at salvage yards only smaller. Sure make things easier for you when you are melting down big things. Make small meltable pieces out of big pieces and save your back in the long run not having to use that sledge hammer

[@chetnash5991]

Good morning from Long Island, NY, USA

[@egerviktor6910]

Guten morgen aus germanii. 👍

[@juliuscaesar3346]

Excellent post 🙏🏻💚

[@armegedn]

So glad I watched 'til the end. Too funny.

[@relativesmenschsein642]

I don't know why... but I think the two aluminum plates are cool! 😁

[@thetrollspotter2766]

Awesome vid mate. Love those big bars!