To make life easier when working those large tires, get yourself a tire spoon. It's nothing but a steel bar about two feet long with a pointy end, and a flat spoon shape on the other end. You jack the tractor just a bit higher than needed, put the pointy end through the wheel hole at the top, then into the bolt hole in the flange. When you pry up from the other end it will lift the wheel and align the bolt hole. I used to work for Goodyear. It's a trick an old timer taught me. Just use care not to bugger the threads. On the PTO button.... See if there is a turn to lock in the far outer position. Sometimes they have that to disable the reverse lockout. Good luck. Sure is one fine new toy.
@ScaleCarModels10 жыл бұрын
Another great video Bill, I find the trial and error most cut out of there videos is what makes yours so enjoyable to watch KUTGW!
@webersoffroad10 жыл бұрын
I never understood why some wheels don't have studs!!! so much more work... great videos bill thanks!!!
@all4jarrett10 жыл бұрын
Use a coating like a liquid bed liner on the bottom of the deck. Stops rust and also works to keep the deck from being dented from rocks when mowing. Not a thick coat, a thin to medium coat. There is a lot of lawn mowing companies here doing this to protect there expensive commercial mowers. Its pretty cheap to do yourself during the winter. I have personally seen some sandblast all of there deck and coat the whole thing in this idea even.
@geo_walters10 жыл бұрын
This is the greatest instructional video I have ever seen. I've been thinking of a 54D deck for my 1023E TLB.
@outdoorsman522988 жыл бұрын
Hey Bill, leave the spring loaded handles flipped up on the deck before you drop it, the deck will drop all the way and you wont have to redo it every time.
@williamkeaton101210 жыл бұрын
That extra bar that you mentioned on the front of the mower deck is probably an extra wear plate. That would be my guess. Great video as always Bill.
@markpaulene19669 жыл бұрын
Looking at the front wheels, can you not put the left wheel on the right and right on the left side so the valves are on the out side ? Or do they only fit one way
@lucashobbs711910 жыл бұрын
Bill, might want to swap those front tyres around, that way the rims will be facing outwards like they're meant too, and you'll still have your tread facing the right way.
@Legoinventor201210 жыл бұрын
It looks so much better with those tires on it.
@cjphillips66488 жыл бұрын
The factory put the front tires on the rims backwards. That can damage the valve stem, you might want to take them to a tire shop and get the problem fixed soon. don;t wait!
@garretts9110 жыл бұрын
Bend a spacer out of spring steel so when the button is pulled up the spring steel holds it high enough to override the backup disengage. You could still shut the pto off just like before too,
@garretts9110 жыл бұрын
Also, why not build an overhang off the side of the garage to put all your attachments under?
@jokerman21310 жыл бұрын
That bottom bar on the deck is made to wear out instead the deck being scraped away.
@muddinguy10010 жыл бұрын
Exactly as you said. Just like on a bucket, it has a removable blade instead of the whole bucket, you replace just that strip instead of the whole deck.
@gubb7348510 жыл бұрын
but the bottom not supposed to touch the ground when cutting, that's what the wheels are for. the bar does not make sense.
@muddinguy10010 жыл бұрын
Very true also, the deck shouldn't touch the ground hence why it has wheels. What actually happens is the grass wears on that area since the deck is lower then the grass. Even though grass is "soft" it can do its number over time. Plus the hard stick like grass he talks about doesn't help much either.
@gubb7348510 жыл бұрын
Dakota Eastham i see, forgot that. still its an odd placement.
@nealamberg80710 жыл бұрын
Bill I agree with you that the safety switches on those seats are a pain in the butt. And they are soooooooooooooo annoying.
@dave113510 жыл бұрын
Make those back wheels easier on yourself, bill. I see it has bolts instead of studs. Get yourself some threaded rod the same diameter and pitch as the bolts. Cut two a few inches longer than the bolts. Cut a slot in one end of them and grind a taper in also. Thread them in opposite sides, slide your wheel in place, the modified bolts will align the wheel, just install the remaining bolts, remove the alingment bolts with a screwdriver, and install your remaining two bolts. All done, and no fighting the heavy wheel :-)
@landykid10 жыл бұрын
I was thinking of mentioning something to him like that do it make it so much more easier for those tires
@Rab9310 жыл бұрын
remember wheel bolts are high tensile, regular rod is too soft
@dave113510 жыл бұрын
landy kid yeah, please mention it to him, it would be real easy for him to make, and changing those tires will be so much easier. Thanks.
@dave113510 жыл бұрын
Robert S these are just used to align the wheel to the hub, after the other factory wheel bolts are installed, these are removed and the remaining two bolts are installed in place.
@landykid10 жыл бұрын
Just take a screen shot so i remember to tell him about it tomorrow
@billwhitman15299 жыл бұрын
Paint the underside of the deck with "Slip-Plate" paint and the wet grass won't be able to stick to it. Helps the deck to last much longer.
@johnm.evangelis6939 жыл бұрын
You are Hercules for sure Bill.
@audrawalbert533710 жыл бұрын
Hey bill u need to get a spud wrench for getting the hub hole lined up to your tire or you can make one with a piece of round bar. I made one when i was a mechanic for aligning Volkswagen tires (same design). Just push it in hole and it will line right up make two of them and never fuss with that again. love your videos and keep them coming
@doublesagri325910 жыл бұрын
take the tireon the front right and put it on the left and the one on the left to the right that way they will be the proper direction and the valve stem will be on the outside
@XAuroraMarinesX10 жыл бұрын
Hey Bill. With your Iron man connection, you should be able to build a rack system behind the garage. Think warehouse racks. They are quite tall and hold lots of weight.
@mjfnh709 жыл бұрын
The reverse PTO safety overide is no big deal. I have it on my little tractor and it bothered me at first but it becomes second nature to pull it up just before stepping on reverse. I don't even think about it anymore. You'll get used to it. The oversized knob is easy to grab while holding your beer too ;)
@patrick550710 жыл бұрын
Andddd that JD cutting deck is why I have a Kubota!
@39gadget10 жыл бұрын
You're going to have to add a wire from the battery to connect your 12v powered fuel pump. You added a 12v "+" terminal to the tractor that you traded in. Maybe this time you can do it without shocking yourself.
@billstmaxx10 жыл бұрын
***** run it off the starter wire its right close
@cjphillips66488 жыл бұрын
Is the 2032R yours, or does it belong to the owner of the cemetery?
@YoteHunter5027610 жыл бұрын
You can run a jumper across two of the terminals on the back of the PTO switch and eliminate the reverse lockout- you have to check which terminals for your series...
@kevinb20410 жыл бұрын
That pto switch should pop out with a pocket screwdriver....there should be enough wire free to get the plug off.
@aemt113110 жыл бұрын
Those switches,AM-118820, are designed to be pulled on and do not pop out. I have tried to remove them, and even with access to the back of the switch, the tabs always break. I just go ahead and break the tabs and get another one.
@trisig309 жыл бұрын
Richard Erskine mk!
@nickjohnson99688 жыл бұрын
u could swap sides with the front tires bill if the rims are backwards then the dish of the rim will be right and valve stems will be out
@ManuelHernandez-fv2zf10 жыл бұрын
Will you be flying your yellow helicopter mod in the 2015 game any time soon? I really wish you would, so we all could see the layout of the new maps. I truly hope you are felling much much better real soon, Bill!
@dcmkcbbq9 жыл бұрын
1. The front plates you took off, you shouldn't of had to swap. If you look at the ones you had on originally, they have an offset pressed into the plate. 2. set the quick hitch on your floor jack and let it do the heavy lifting. 3. Maybe a cloths pin might be called for by one of the problems you mentioned in the video.
@TheDisorderly110 жыл бұрын
That plate on your deck is to add support for driving over the deck.
@39gadget10 жыл бұрын
Just make an "H'' frame wheeled dolly for under that heavy front tractor attachment. When it's time to install it you can roll it under and because the dolly is in an H shape you can use a floor jack to raise it up into position.
@Triveroni10 жыл бұрын
Sorry to hear about you not feeling the greatest.. :/ Hope you get feeling better as soon as possible! :)
@1VVSA10 жыл бұрын
in the plug thing you could probably use some wire nuts if its a different plug
@VJTCI9 жыл бұрын
See this is what I love about KZbin at 6:30 in the morning when you can't sleep
@SCRAPWOODTOCRAFTWOOD10 жыл бұрын
BILLSTMAXX :) hey bill when you change the tyres have you not tried 2 long tyre levers under the wheels and work it into place maybe easier thats the way we do it with lorry tyres makes it a whole lot easier anyhow thanks for another great video keep up the good work
@joshgerszewski10 жыл бұрын
awesome. I just switched our tractor (john deere 1026 r) over to winter mode today. our tractor has that dumb back up safty auto shut off thingy to. annoys the hell outa me. I just jam a close pin under the button :)
@Karl4279 жыл бұрын
Are you sure the front wheels are on the right side? Never seen valve stems on the inside. But I could be wrong
@ajchase65817 жыл бұрын
that plate on the deck is for if u hit a rock or something it won't push in
@ol_skoki795510 жыл бұрын
good vid Bill. keep on trucking and f those over done.. so called Safety buttons big time nucance for the working tractor ? nice unit there Roughly what does a tractor like that cost ??
@Gender19798 жыл бұрын
i dont think ive ever seen anyone scratch there beard that fast.. it made me giggle when he did that lol
@jacobnelsen96758 жыл бұрын
T the same time as ever in the in my room and my mom and I have no clue what to do with a lot of the best thing ever when the only one that has to do wi I don't have to be a little bit more like it but I
@andrewhewkin98849 жыл бұрын
flip the front tires around and the valv stim wont rube
@charmlessfungus22510 жыл бұрын
hey i think it would be a good investment if you got your yourself a two pronged pallet jack you can use it too lift those heavy tires and push it in place by yourself plus its good for other stuff
@crazyjdkid10 жыл бұрын
The PTO switch is on the transmission. Its always open unless your in reverse, so just unplug it!
@WilliamSeibertwillis92310 жыл бұрын
there is ways to bypass that RIO switch, some time on google will help. you can disconnect under the dash, or unplug the sensor on the pedal.
@jokertt1410 жыл бұрын
I cant believe your leaving the front tires like that .
@leonardo148010 жыл бұрын
would it not be safer to put the tiers on the rims right way now before you get to a point where it is way too tricky to do later or impossible?
@lawnboy81SMS10 жыл бұрын
anyone else think there's a lifter tick? I know diesels have extra noises that regular gas engines do not, but for some reason it kind of sounded like, at one point in the video, there was a lifter tick in the engine. Unless that's just because it's a new engine and stuff making it sound a bit different.
@acdcfanforever310 жыл бұрын
For a cool video/expieriment, you should make a cool stack for the new tractor!!! Like the ol' girls do with the rain caps and all. What ya think?
@rubenfuentes98910 жыл бұрын
Wa is like your emergency blinkers
@RoanJS10 жыл бұрын
A cradle would help get all that under there.
@Rab9310 жыл бұрын
Bill, that reversing sensor, could you just disable the sensor at the pedal like you did at the seat
@jeremylee9910010 жыл бұрын
bill you should just take the switch from the new tractor and put it on the backhoe, and put the backhoe one on the new tractor
@zx8401ztv10 жыл бұрын
BILL, you panic too much about a simple switch, there is eather a voltage controlled latch or a solinoid release. If its too hard for you, then make a small flap on a hinge to keep the button up, easy :-)
@NewHavenMotorsports10 жыл бұрын
Your wheels are on the wrong side..... Swap sides and they will be right. The valve steams should point out. I would think.
@39gadget10 жыл бұрын
He knows that the valve stems should be on the outside but he installed the tires so that the tread pattern is facing the correct direction. Unfortunately the tires were installed on the rims backwards.
@NewHavenMotorsports10 жыл бұрын
***** Thats what i'm saying..... If he turned both wheels and tires around.. And then swapped sides, it would be fixed.
@Herschy310 жыл бұрын
no don't flip them when you swap sides just straight over. Tire pattern stays the same
@PuchMaxi10 жыл бұрын
The thing is, they are loaded with windshield cleaner so swapping the rubbers is not very fun!
@WilliamSeibertwillis92310 жыл бұрын
some tractors have it on the inside to protect them a bit, all my garden tractors are like that
@paultuohy685010 жыл бұрын
Make a little stopper like the pre load for your Tmaxx and put it in behind on a ring so u can just put it when u put it on
@Mariusdubose10 жыл бұрын
As much as you have that camera stuck in your mouth...you think you would have glued a mouthpiece on it...
@benharleman58710 жыл бұрын
My pto button on my lawn tractor does that too, you get used to it quickly
@spdkilz08 жыл бұрын
Bill put those loaded tires on a small 4 wheel dolly. That will making lining them up way better. Princes auto has it for $20 here is the product Sku: 8571838.
@brettrath392310 жыл бұрын
I think you can use a jumper like the seat for the PTO reverse mode too.
@MsTractorguy9 жыл бұрын
I've found that turf tired get better tractor in winter than ag or construction type tires
@getitdone19589 жыл бұрын
yep bill - that is one nice tractor you got there
@barnettboys1310 жыл бұрын
All you need to do is remove the switch under the hydro reverse pedal simple
@austinstrong125610 жыл бұрын
You should build a set of shells or something like that next to your shop for attachments
@kevinb20410 жыл бұрын
Sea shells?
@austinstrong125610 жыл бұрын
I meant shelfs
@Rhys_Official8 жыл бұрын
What happens if you pull the yellow button up then twist?? It should lock in place ( I'm guessing )
@andreww643910 жыл бұрын
Isn't it nice when things are tight fitting because it is new and not because of rust? lol
@jameslicking22608 жыл бұрын
Bill make a temporary pilot stud to put in one of the wheel bolt hole to help line up the bolts
@denisetindall858 жыл бұрын
i really like this video on you tube 😀
@Erik-zr5fv10 жыл бұрын
Did you make a video of getting this tractor and sweet video
@ryanman322410 жыл бұрын
do you have a gopro headstrap?
@TheThecyclist10 жыл бұрын
wonder how long it will be until you do a first fill up of fuel on the new tractor
@millerqh10 жыл бұрын
Nice
@jayv740410 жыл бұрын
Is this a compact or sub-compact tractor?
@Connor-vw6yi8 жыл бұрын
Sub compact
@railroadman5710 жыл бұрын
Nice video Bill i have a question also your Brown jacket your wearing , what make is it ? i would like to get one like it , thanks for any help you can give me , thanks bud .
@billstmaxx10 жыл бұрын
Steven Noel made nt dakota from marks work wearhousewww.marks.com/shop/en/marks-marksdefaultsalescatalog/washed-stretch-duck-shirt-16277
@TheTDHS201210 жыл бұрын
If the PTO button on the 110 is what you need, why not order it and custom fit it to the new JD, surely their csn't be that much if a difference
@reesetom18 жыл бұрын
CALL JOHN DEER ENGINERS
@zlott79419 жыл бұрын
Put a clothes pine under the button where u turn on ur implement and u won't have to keep pulling it every time u back up
@damianb415510 жыл бұрын
how much did you buy the john deere for?
@liambarton769410 жыл бұрын
When is your next mail Sunday I feels ages since u did 1 they where great videos
@teresabenz711710 жыл бұрын
Bill, there is a micro switch on reverse pedal.
@Boobtube.9 жыл бұрын
by now u prob figured it out. that "RIO" switch can be disabled. You need to find out which contacts on the switch close when u pull the switch out and put a jumper on those contacts the same way you did for the seat. After I got my X738, within 2 hours of getting it I had my seat and the RIO switch disabled.
@SeekerKnight7 жыл бұрын
You may want to try pulling the switch out and turn it a bit to lock it in place. A lot of those switches can disable the reverse lock out. 1
@TYEGaming10 жыл бұрын
the FF makes u look funny :)
@tdmfan75010 жыл бұрын
bill, don't feel bad. Our X530 is the same way. but one guy here on youtube, i can't remember his username, (this is for our 530) fabricated up a solid piece of plastic and sticks it in there whenever he uses the PTO. my idea for that switch of yours though, 1) try this: www.tractorbynet.com/forums/john-deere-owning-operating/287024-how-do-you-rig-jd2032r-2.html 2) there should be a way to get underneath to the pedals, and disable it there. or just replace it. that actually is your best bet. i was just looking on john deere's website, here's a part # for the switch: AM127393 Now, i don't know if this is the one with the pulll up (RIO) or without RIO. if it is the one with, ignore it. if not, there u go. :D
@matt8887610 жыл бұрын
just live with it
@19jsy10 жыл бұрын
clothespin works great for that pto swtich bill
@Nordic_Mechanic10 жыл бұрын
I hope you will tell Deere about the pto thing being a huge pain in the ass so they make it right again on the next models. Those safety things are getting out of hands and stupid
@muttgusse8 жыл бұрын
gday billy :)
@nathan92169 жыл бұрын
What diesel do you run In them
@grantanderson60010 жыл бұрын
Its for safty because of some one once put there hand under the deck of it and it sliced his hand off so thats why
@cat101pig10 жыл бұрын
The safety in the seat is in case you fall off and the pto safety is to add an extra step for when you back up so you don't mow over anything. I have disabled the pto safety switch on my lawn mower
@60oldmen10 жыл бұрын
u can tell that the tires are on the wrong side bill.
@jimmymasseau59566 жыл бұрын
How did you fix the pto knob
@clivegibbs96189 жыл бұрын
He should go to john deere for some lessons on how to change a wheel , if he worked for me he would be fired for wasting time
@Ag_n_Mech10 жыл бұрын
I think the toggle switch would work good for you thats how most of mine are rewired
@nicholashiggins39029 жыл бұрын
Wait bill u got a new tractor
@dannythedeerenut38979 жыл бұрын
those tires seem like bobcat tires to me. anyone else see that?
@lukephillips872710 жыл бұрын
It's a safety feature
@matt8887610 жыл бұрын
you don't change the front tires?
@matt8887610 жыл бұрын
never mind
@maasive3310 жыл бұрын
does she still have that new tractor smell
@spongebob728510 жыл бұрын
What's that flask like thing on the bar behind the seat?
@ScaleCarModels10 жыл бұрын
Been wondering that as well.
@PuchMaxi10 жыл бұрын
Same here! Maybe some kind of storage? Could not find it in the manual...
@HughzieTube10 жыл бұрын
Waterproof storage container for the Operating manual.
@brandonlerch46219 жыл бұрын
Hey billstmaxx what happen to your other tractor
@brandonlerch46219 жыл бұрын
thanks i seen his video when he took it to the dealer how much weight can his new trailer hold
@13jtyler10 жыл бұрын
the pto problem i would follow the pedel linkage back to ur hydrolic swash plate the wlll be a switch for reverse i just unhook it and the tracor think u never use reverse BILLSTMAXX :)