Bio Bidet SlimEdge / SlimTwist: How to Install Properly Step by Step (Perfect!)

I show you how to setup / install along with a quick review and how to use the Bio Bidet SlimEdge (same as SlimTwist except the knob is different). With this bidet you have two nozzles one for your butt and the other for a female part. Pressure is good unlike some other bidets where even if you turn it a little bit it, water shoots out like a laser. It also comes with 3 toilet bumpers in case there is a gap between the toilet case and seat but most of you will not need it. Hope this helps.
Bio Bidet SlimEdge Simple Bidet Toilet Attachment in White with Dual Nozzle, Fresh Water Spray, Non Electric, Easy to Install, Brass Inlet and Internal Valve: amzn.to/3bZeNrd
Amazon Daily Deals: amzn.to/2QVcoRC
----My Gear for KZbin videos----
Main Camera 99% (smartphone): amzn.to/2utQFGH
Tripod: amzn.to/2xxpKcw
Cell Phone Tripod Adapter: amzn.to/2iM4Kw5
Selfie Stick/Tripod: amzn.to/2iK2Agu
Microphone: amzn.to/2xTAw13
Lights: amzn.to/2xVa5Ic
Electric Desk: amzn.to/2LLyzqU
Dual Device Tripod Setup w/ Hand Grip : amzn.to/2sOXuC2
Cheap Video Editor: bit.ly/2HdAMb7
Business inquires: [e-mail]
Twitter- / worldoftech11
Disclaimer: The above links are affiliate links meaning if you buy products using those links i will receive a small commission.
Also i am not responsible should anything go wrong so do at your own risk!

[@dieselboy914]

Thank you for this video! It's better than the manufacturer's, and it helped me solve a mystery problem. I got mine installed successfully thanks to you!

[@vannakr25]

Manufacturer is SUPER CLUELESS- maybe b/c it’s made in China

[@vannakr25]

You’re de best. At least there is someone out there that shows How To. I did mine before I watched your video. I Just need to get a Longer pair of bolts that hold the toilet seat together b/c after I placed accessories on it - it shortened the length of bold - so I can’t really tighten that much from underneath the bolt. Thanks again. I hope the manufacturer paid you something.

[@DougForce]

Nicely done on the install! Nothing beats a good bidet in the days of TP shortages!

[@floobadoo99]

the instructions that came with mine seemed to neglect the plumbing tape, my T valve was leaking at first but your guide helped me secure that water. Thanks!

[@kimwarren42]

Thank you for this video. I wouldn’t have been able to do it without it! Any handyman videos will be much appreciated 🥰

[@peanutzgirl8828]

Thank you so much! So helpful! I followed your every step and installed 2 biobidets! Woo woo!

[@timjohnson8820]

i bought this bidet a few weeks ago. I LOVE IT!

[@rayrayusa]

Nice video. Thanks for sharing. Your toilet seat hovers over the bowl because your toilet seat is not flat on the bottom (the seat is concave into the toilet bowl). This is because the nozzle assembly extends into the bowl without angling down first. The bumpers help a bit, but still it feels like the pressure on the nozzle assembly will crack over time. The real solution is to get a new toilet seat with a completely flat bottom or buy a different bidet which doesn't jut out as far and angles the nozzle assembly downward like the Samodra. Also I was warned to just go hand tight with the T-adapter at the toilet inlet. If you overtighten with a wrench, it will leak. You didn't overtighten it, but that's a common leak area. Also the particular "wrench" you used is normally called "pliers", which worked well as a wrench in this case.

[@qwesence1]

Thanks! I was able to put this together following your steps!

[@WorldofTech]

Great job!

[@jdurbin55]

Perfect video! Thanks so much for taking the time to do this.

[@Pfloyd1970A]

Video was very helpful and it sure beat using the directions. Great job, thank you very much!

[@msandoval122]

I also applied the plumbers tape on the threads prior to the install. 😉

[@jennifersolorzano1416]

Thank you so much for the video! This made it soooo easy for me to install.

[@jaydeeluistro4344]

Thank you for your time

[@lholder8096]

just used this video and it went in easily! thanks!

[@self-righteousideologue9398]

This bidet has crazy water pressure. It can get quite messy. I would recommend installing a valve that attaches to the bidet to throttle the flow coming in

[@DaveyDGaming]

Thank you

[@paulgettinger5983]

I like your video but I do have some improvement. 1. Plumbers tape should always go on in the clockwise direction. 2. You should avoid using a wrench on plastic fittings (Finger Tight). Your bidet is off center to the right. This moves the control closer to the toilet. If you mount the bidet off center to the left it moves the control away from the toilet.

[@dieselboy914]

Thanks!

[@JBearwa]

Nice video good information. It help me install! Thank you

[@halleythomas1011]

Super easy thank you!!

[@leaper1983]

Where you placed the bumpers...is it flat under there or is their curvature...cause my toilet seat is curved and doesn't sit flat down even with the bumpers

[@lany_07gaming]

Nice info.👍

[@MattRobloxYT1]

Nice info

[@Berrypancakes229]

Good review 👍

[@SUMMEYWISE]

Thanks for the walkthrough. Whenever I turn my switch to the butt position, it opens, when turning it to the off position it won't close the nozzle. It works properly the female nozzle. Any suggestions?

[@El-Fartomatic]

Maybe try lowering pressure by “closing” the valve a bit. Or exchange it if possible

[@maazshafique3604]

Hello, I want ask a one question related Gopro..please reply me

[@BuddhistFist271]

My mans tried his best not to say vagina. Very good info though 👌

[@RaviPaudel69]

Nice tutorial😇 thumbs upppp

[@arthurhodo6066]

Mines is leaking right under the control knows, seems like where the battery would go

[@Dug2watch]

Thank you!