QS120 e-bike build is the quickest bike on the channel.

[@miguelpagansr6128]

Absolutely my favorite build so far, it really needs to be either stretched or wheelie bar.

[@Black66]

Thanks! Ya, mine too!I will stretch it soon!

[@nickpatton3211]

Can you build me a bike please

[@rafaelramos2299]

@@Black66 HOW MUCH DID ALL THE PARTS COST

[@Black66]

@@rafaelramos2299 Links for the parts are in the description of the videos on the e-bike playlist

[@rafaelramos2299]

@@Black66 thank you

[@TheAnthonyBrandi]

You been a inspiration to me. I was building my mini bike with the same motor kit you recommended but never got to ride it because it burned up along with our house 2 weeks ago. I'm so sad. We didn't have any insurance either. I been battling cancer since 2021 so it's been rough and I just wanna feel the wind in my hair again. Life's handing me such a bad hand.

[@paulk459]

what caused the fire

[@mozzde4675]

@@paulk459that’s a dumb question

[@mikehagquist5198]

Probably the battery

[@katherinecreamer9039]

@@paulk459 Believe it or not, it was smoking in bed. My mind was blown too.

[@IdahoEagle77]

Now this is insane!!!!! Please do more kit builds like this from Electro and Company! I could not find anyone else doing this with coleman mini bikes like this. Would love to see more about range, battery life, etc... with these builds.

[@andrewpipitone1572]

This is awesome. I love the power it has. I want to see this extended. I changed tires on my bike from mtn to trail type tread and it slowed my bike down. I love the kit. Ps when I was 11 I asked my dad if we can make an eletric 5speed.He told me we needed a constant runing motor. He as a good mechanic. But always busy and the last of 5 did not get much attention. Lol it was 1973. Imagine?

[@Black66]

I will extend it in a video soon. Yes no need for gears with this bike. Have you checked out the race video with this bike? It's in the e-bike playlist. Thanks for watching!

[@andrewpipitone1572]

@@Black66 I will I have two tuong bloods that I need to build something with like like what you do. We will be watching and getting friends involved. :-) Holy crap 60 mph on a mini bike that insane. Lol

[@gunsandrotors8704]

Its perfect...great off the line and really good top end. And quiet.

[@wilsgrant]

He makes it look so easy.

[@mikeransom1959]

I have spent like 10 grand between two bikes one started as a stock 2017 Emmo knight sport and was upgraded with first a Qsmotor 3000w Mid drive assembly kit that bolted right on with almost no modification and had a belt drive 3000w Qsmotor mid drive motor sandwiched between two nice light aluminum arms with everything from the rear rim, belt drive pulley and rubber dampers kinda, a votol em150, a two piston caliper, brake pads, the new hardware to mount everything using existing rear shock and hardware, existing rear tire and the existing wire harness and controls and brake levers. 72v 70ah controller The first bike goes 110kph and can wheelie. The Second bike exactly the same except I used a Fardriver Nd96530 controller on this one and it has way more torque and is kinda scary to be honest because of the insane torque that will throw you off the back of your not hanging on tight. It's running at 96 volts instead of 72 and more amperage too. It has a 96v 55ah lithium ion pack and turned down by a lot it does 130 in seconds and had to have the ramp up speed turned way down to make it safe.... So much fun.... Anyone else got one like this and what is the max anyone has ran the Qsmotor 3000w mid drive motor at with belt drive??? I blew a belt twice now in 4 years. No sign of wear just blew out when I cranked hard on it both times.

[@mc4492]

That thing flys out the gate.. Sounds like something out of Star wars..You can tell you respect that crazy power band..Really cool build..👌🏼👍🏼✌🏼

[@bikerevolutiontv]

I like how you pay close attention to detain. Very good build!

[@scrappyhustler7467]

My neighbor has a similar kit he amped up and he ran a 6.54 8th mile on his motovox e mini bike no 1/4 mile as of yet regardless its fast as hell and faster than all my gas.

[@jr.3650]

Dude, you got the fastest coleman on the planet. Thats crazy!!!!

[@Barncatfish]

Nice video work and editing, and useful real-world ride along in terms of how the 120 motor feels on a 20s battery. If I was going to sink that much cash on components I'd put them in a more sophisticated rolling chassis, but that's personal preference...

[@nicolec7290]

900 never. 30 mph is just fine. Love those tires

[@NVScrapper]

This was an awesome build. You are a genius Black66! It must be that giant Alien brain of yours😎! I can hardly wait for next Saturdays video to see the racing against other MB's. Keep up the good content! 💯💯❤💚👏👏😘

[@Black66]

Yes, it is my giant alien brain! 👽

[@erichamm7198]

One that size with some suspension would keep it from lifting up I think. Really nice job on that.

[@Black66]

Thanks! I'm going to do something like that or stretch it. More videos to come with this bike. Thanks for watching!

[@nealmyers2735]

This is the best bike in this style I have seen so far. I'm going to try to build one myself. Thanks for the great content

[@geemy9675]

impressive. looks WAY quicker than the 14kW metacycle to 30mph even though it's limited by the geometry and short wheelbase. there's probably several factors, lighter weight, smaller wheels/shorter gearing (direct drive wheel hub is 1:1), better cooling, more aggressive torque. looks like a slightly taller gearing might still get to 60mph quicker.

[@davidmalone8565]

Another work of art sir!!

[@Black66]

Thanks! Check out next Saturday's race video with this bike!

[@wbt398]

@@Black66 *

[@T2daBikeGuy]

nice clean build i got to get out of this city so i can build

[@Griff93ST]

That things fastter than some 125 bikes wtf. What a cool build dude

[@EntityPilot]

What did you use to program the motor and the controller? Did you enable flux weakening? Or is the motor on the stock program? Thx.

[@Black66]

Yes, it was on the stock program in this video. Battery upgrade and parameters in the controller along with a frame stretch for better launches are coming in upcoming videos.

[@EntityPilot]

@@Black66 thank you i wasn’t sure, thats pretty fast for being stock 😅

[@dust921]

i made a all wheel drive fat T E bike. im canadian so i needed something good for snow/ice/sand/mud lol & i think it might the future when it comes to slippery of rode stuff it works super good ;)

[@AdamOpheim]

Instead of stretching, try wheelie bars. Made many sets out of Conduit. Easy to bend up and take on/off. And plenty strong if built correctly. I make them the length of the bike and let them touch slightly when seated. I run 120v setup...

[@johngalt97]

Electrical conduit with wood shoved in at the ends to stiffen the mounting holes, and braided steel wire with turnbuckles for the 4 tension elements. No bending required, just drilling at either end of the conduit, which can be done with a hand drill. Super light weight and super strong, as Adam says. I ran one with the normal suspension on an RD350, and it made launches smooth-as-butter.

[@POSminiracer]

That's pretty impressive. It'll be interesting to see the ride you can get out of it

[@jasongooden917]

Speed Limit 40 Sign Black66: I did a speed on 63.95 😂

[@Elijahhuckaby]

Bro love it man keep it up I love mini bikes because of you and I love it and I am a mini bike Mechanic now

[@str8mac842]

That thing is fast ! Quiet but still have a sound to it 🔥

[@danielroach8330]

This minibike is awesome!

[@Mike-ig6jk]

Great build ! Black66 , you should invest in a DeWalt or Milwaukee portaband , metal cutting bandsaw . Build a table / stand for it . Ideal for making accurate cuts , brackets etc ..

[@ericwhittaker3570]

Seconded!

[@turbocoupe9212]

Awesome job dude, keep up the great content.

[@Black66]

Thanks, will do!

[@kenndjohnson]

fat tire reverse trike for on and off-road for Michigan UP living all season. Enclosed option for winter. That would be awesome. That would open a market for winter Midwest people. And make it sporting looking like a Polaris RZR.

[@budwhite9781]

Fantastic video. What a build. Great performance numbers too👍👏

[@Black66]

Thanks! Check out the race video with the same bike . It's in the Mega Moto e bike playlist .

[@joneserupinsmoke9161]

im a gear head and love how engines sound but im starting to like motors

[@TheTrooper777]

That is insane, awesome. Thank you for sharing

[@Black66]

Thanks for watching!

[@juliosdiy3206]

The speed is like a bullet!

[@agungdecaprio8925]

Wish I have one.that was cool electric bike 🤤🤩👍

[@dust921]

i like the wire cuvers looks cyberpunk :)

[@runingblackbear]

Grate job on the ebike

[@jeffkent6345]

I really enjoy your channel. I’m going to build a Mega Moro 212 . Do you think this kit would handle the bigger tires, I’m going 21 “ double jack shafts for more gearing options. This build will be for extreme single track slow going to wide open desert riding. The QS 138 kit has more power and options, I’m considering this kit. Thanks !

[@Black66]

Thanks! Ya, i think you can probably get bigger wheels and ties on there. Yes, the QS138 kit has more options. I'm building one myself.

[@raynagy7660]

I really enjoy watching this channel it's cool

[@Turbski1]

i wish i had that electric setup to install onto my GTS frame

[@tristanmcnabb2741]

Allsome work from cruzermans inventions 😁🎉👌🌟

[@dt9094]

I love what you have done. I’m an old man now and never once did I ever think my mini bike would be electric powered. I’ve been watching your shows and I think there just great to watch. I’ve been tinkering around with my grandsons bikes (2) they want me to get back in the saddle again. If you have a larger mini bike, with out front suspension we’re would you look for a larger set of front suspension? Thank you. I’ll keep watching 👍🇨🇦

[@Black66]

Thanks for watching the videos. Gopowersports has all that stuff.

[@gearlab734]

It's cool, well done, but that things a motorbike!

[@tristanmcnabb2741]

Allsome stuff from cruzermans inventions 😁👍🌟🎉

[@BustedKnucklesBuildsTexas]

Great video , nice work on the bike , clean work !

[@Black66]

Thanks!

[@robinblackman4509]

Excellent 👍..... I'm coming to that Level of power with my next build.... 😀

[@Black66]

Awesome! Have you watched the e-bike race video? kzbin.info/www/bejne/i4m2o4KrgNCXqLc

[@AlexRapada-ft6tm]

You're crazy. I love it!

[@moose1992caprice]

I was wondering why this motor kit was $899 and the ones on Amazon are? $200 or so? I completely understand that you get what you pay for in most cases, but are there that big of a difference in the parts?

[@ReganHumphrey-g7e]

I have the same kit for my mini trike! What size braided sleeping did you use on the phase wires?

[@Black66]

The links for the parts used are in the description of the video.

[@stanlucas665]

If you’re gonna stretch it. Why not put the GPS swing arm rear suspension on it. On a side note. If you haven’t had an issue with the handle bars slipping, that’s awesome. Unfortunately it did happen to me once and it was a big surprise. My cure is to drill and tap hole in the middle of the top handle clamp. Run a set screw down inside and tighten it against the handle bars. Mine hasn’t moved in 2 yrs.

[@Gunshotglory]

Dude sick! Love the video. no fat just good info

[@gonetoheck]

How much for the Tesla mini bike ?

[@richpalmisano1740]

Definately can get more top end but it will sacrifice some 0-30. Could this sucker get over 70 with the correct gearing? This frame is pretty much the same as the mm80 no?

[@raynagy7660]

That bike is sick man that's crazy I like it

[@scotto9online]

looks like the high desert , hello from apple valley

[@Black66]

I used to live in Apple Valley.

[@harryfowles5088]

Bro that’s bad ass… I would buy one. U should go in business.

[@psehunter3525]

Super awesome work! BTW I’ve never worn my knee pads upside down before do you find it more comfortable?

[@Black66]

Try it. It is WAY more comfortable.

[@Newso-m2b]

Great vid can I ask what is the name of of the company and where did you buy the kit from I’m wanting to do a e build also thanks

[@Black66]

Check out the electric mini-bike playlist. The link for the kits and the parts used are in some of the video descriptions. kzbin.info/www/bejne/j5XLl5mtqNBgiac

[@mlindsay527]

Nice! Stretch it! You know you want to! Do you think you are hitting the power limit of the motor or some programmed rpm max at top speed?

[@Black66]

Thanks! Did a little programming already. Its reaching full power now with the battery that it has. More videos to come with a more usable gear ratio and more top speed!

[@juice9767]

Love it. Sweet Build 👍

[@petermelnyk7664]

Awesome thanks for sharing.....also thanks for using MPH.... instead of kph.

[@Black66]

Thanks! Check out the race video with this bike . It's in the e-bike playlist on the channel. Thanks for watching!

[@wetwater481]

Finely

[@JayL781]

You know I'm getting ready to build a similar build I've been trying to figure out a way to use a computer cooling system with the speed controller box to help keep temperatures down

[@jdickens8306]

Simple radiator pump and water block easy pc cooling for controller

[@keyelectric91]

Hell yeah what up did you use for the zero to 30 testing? I need to try it on my Honda xr350r electric conversion bike I made.

[@Black66]

I use a Dragy performance meter for 0 to 30

[@johnk6346]

bad ass minibike💫

[@ianmangham4570]

Beautiful tyre's

[@rickmantwill8356]

How much did the kit cost? I have an old PGO scooter I would like to convert Would not need the forks or handlebars

[@Black66]

The links for the parts used is in the description. Thanks for watching!

[@colinriches1519]

What sprockets did you use? Just wanted to know what ratio you're running in the video. Please.

[@Black66]

I show a couple ratios I have used in this video...check it out kzbin.info/www/bejne/r3mxYoevodplgKs

[@colinriches1519]

@@Black66 Thank you. Awesome bike btw.

[@joshm4723]

I don’t know why I never thought about researching electric conversion kits for my mini bikes and go carts. This video literally just blew my mind! Any recommendations on a good electric motor conversion for a standard go cart?

[@liamhunter2403]

Can't go wrong with Kelly Controllers and QS motors-all depends on budget IMO...Can get expensive FAST haha

[@Mike-ii1vz]

Because everyone who would have put you on researched it and seen how expensive it was lol

[@liamhunter2403]

@@Mike-ii1vz At least anything worth getting power-wise would cost $1000 for motor/controller and another $1000 for battery. Can always go and get a kit from Amazon for ~$300 and a battery for ~$500.

[@SoLoCruizer]

omg he got the QS120 holy shnikieeez

[@farrismoore7524]

I love that bike 😧

[@jojojeep1]

What is the distance on that bike if you drive normal, I’m thinking about getting rid of the whole carburetor and cam thing and plus the man won’t bother you on the E bike

[@Black66]

Check out the e-bike range test video. It's on the e-bike playlist .

[@joedoakes8307]

WHY , aren't you giving US your top speed for each power setting ? Also , the price of the Kit ?

[@BrokenWoody718]

I’m about to build one of these and I gotta ask, how long does it take to charge the battery, and how long does it last? Thank you a ton! ❤

[@Black66]

It could be anywhere from 45 minutes to a few hours depending on the charger used. Check out the range test videos in the e-bike playlist. kzbin.info/www/bejne/sJPRY6aeprSol7M

[@dustinhoover8697]

You have a link for this E kit? Comes with battery??

[@letsskydecipherandfindout54]

Excellent Channel exactly what I needed to run across perfect relaxing information with accurate calibration within your best. You've got yourself a lightning bolt. Is it just me or those handlebars on backwards it looks like you're riding it from the other end or stopping it when someone's driving to you can anyone tell that the handlebars are backwards? Or perhaps I'm the only one that is backwards I've been told that more than once

[@Black66]

Thanks! Check out the E-bike race video! kzbin.info/www/bejne/i4m2o4KrgNCXqLc

[@sethcrawford6219]

Just found your channel I love it man keep it up ❤

[@Black66]

Thanks! Thanks for watching!

[@nothoughtsheadempty6220]

A burning question I can’t seem to find the answer to is, which of the ports are used to connect the controller to the battery? I can’t seem to find any pictures or anything on that.

[@je7647]

how many watt you run the motor @ 72v just getting this motor myself and wondering what I should run at? I assume it will do 3000w nearly all day @ 72v?

[@I-TILE]

Nice Fabrication

[@Black66]

Thanks! Check out the e-bike playlist I built a few more kzbin.info/www/bejne/j5XLl5mtqNBgiac

[@charlesyates6687]

How many miles are you getting per charge ?

[@Black66]

Not sure, I will do a range test video soon.

[@lilbeviltwin]

I need one 👀

[@999benhonda]

I'd love to do an electric build...but while a decent motor isn't that expensive, the battery pack and controller are. I did an electric fwd drift trike with a 2000watt, $500 kit...nowhere near enough power for good fun.

[@hobonickel840]

Is there a way to make your truck charge the e-bike just by driving the truck ..because its light enough to mount ...I want to build one and mount it to my truck. Had initially thought about Suron for my bugout bike ...thanks for inspiration

[@Black66]

Thanks! Maybe with an inverter. With the battery that's on this bike you wont need to charge the bike very often. It has a fantastic range.Range Video coming soon!

[@smartassist9700]

If power settings can be set at (30% only). What is top speed? What is total mileage distance one can travel? Also, what is charge time from “close”to zero? Are there speed chargers that plug into a 120V outlet?

[@Black66]

Check out the Mega Moto e-bike playlist. There is a range test along with a top-speed video on the playlist. kzbin.info/www/bejne/nKmcdaSBnKt4aKc

[@jesusanguiano420]

Can you use a different battery for that kit?? The bike Is sickkk bro!!

[@Black66]

Thanks! Check out the e-bike playlist for more bikes with different batteries. kzbin.info/www/bejne/ZnSWlGB7obSAnqc

[@northldnscooters9571]

Great video how many miles does 24a battery go?

[@Black66]

Thanks ! Range test video is in the E-Bike playlist. kzbin.info/www/bejne/o5rUent-jdJ6isk

[@voiss75]

Do u do conversions for $$$ and sell them for us less mechanically inclined? I got the arxyearth 105cc that looks same. I. Need electric due to laws and revoked license

[@delasse3178]

i want to see it do some corners :)

[@misc5831]

Try a larger front sprocket with the same rear.

[@charlesbroussard9289]

WOW like Lightning

[@PGG909]

Awesome.. great work!

[@JRyan93]

What front wheel is that? Great build!!

[@Black66]

It's a 6-inch mag wheel from GoPowerSports

[@markmonroe7330]

Excellent video. You may want to brace/gusset that rear brake mount a bit, especially if dont add the front brake.

[@Black66]

Thanks! I'm going to stretch the frame and add the duel piston brake soon.

[@REVNUMANEWBERN]

I'm wondering HOW this setup would do on a old Snapper lawnmower frame without the cutter deck, like make a go cart with this same setup??? Your thoughts

[@Black66]

I think this kit would work great on a kart project. It has a lot of torque!

[@jonlee580]

Mr. Vermin Supreme

[@louisrouthier9901]

Nice job

[@Black66]

Thanks!

[@matthewstoll2859]

What app or program do you use for the metrics? Its dope and nice mods!

[@Black66]

I use digiHUD on the phone along with the camera GPS for top speed and a Dragy performance meter for 0 to 30.

[@THEDEEDIZZYSHOW]

I'll be watching

[@boxmyster]

Dude.... I want one