Blackmagic ATEM Mini Pro | Features

The ATEM Mini Pro is the next level in Blackmagic Design's revolutionary line of compact video switchers!
Similar to its predecessor, the ATEM Mini, the ATEM Mini Pro from Blackmagic Design is a four-input live production switcher with an integrated control panel designed for multicamera live streaming up to HD video to the internet or broadcast applications from gaming consoles, corporate computer streams, or HD cameras. Along with the software control update, the Mini Pro builds on the Mini with features such as live stream data rate and status information, a built-in hardware encoder, simultaneous recording to USB drives, drive hot swapping with the Blackmagic MultiDock, added record and stream buttons, stream caching, a timecode generator, program preview multiview, tally support, and support for Blackmagic Design Pocket Cinema Camera 6K and 4K to utilize as your broadcast sources.
1SourceVideo.com
844.270.2442
Check us out on social media:
/ 1sourcevideo
/ 1sourcevideo
/ 1sourcevideo
#blackmagicdesign #atemminipro #livestreaming #angelbird #1sourcevideo

[@TerenceKearns]

Well paced, clear explanations. Nice one!

[@lowellmeyer1068]

Thanks for the informative video. One question: do you know if there is an inherent latency built into the ATEM Mini Pro? And either way, what are some of the best practices that you use with the Mini Pro to ensure the shortest latency / lag? And with those practices, what has been your lowest latency time? I'm thinking about buying this product but am hoping to do so in order to get as close to a LIVE feed as possible on KZbin. Thank you.

[@alltehstuffs]

This thing is so cool. I can hardly believe it exists. If you would have told me ten years ago we would have this many features for $600 I wouldn’t not have believed you.

[@1SourceVideo]

It really is unbelievable.

[@sloanNYC]

Impressive at this price point.

[@kilapriestug7209]

Atem fully packed with technology

[@onsetxco]

I had the chance to checkout the ATEM Mini Pro in person and wanted to find more info and came across your page. You did a great job explaining . I"m new in the live streaming and wanted to know if you could go wireless with a wireless router and have the ability to control the software controller with a iPad or high end tablet ?

[@midwifeshannon]

Great Video. I have a ATEM Mini Pro on order. IK like the style of you video.

[@eddienyambe5046]

The music is fire!!!!!

[@britesynth]

Would be cool to have midi ports or be able to connect foot switches for solo podcasters, switching cameras with your foot 😁

[@barrybishop9753]

Does the ATEM software control focus control work on that camera and lens?

[@soon-kyoungkwon6829]

great video!! do you know setting of internet sharing on windows 10?

[@correarc]

is there a vector scope/histogram in the program?

[@CanalPortugal]

Hi there, do you know if there's any kind o light to id witch camera is on that I can use with this Mini PRO?

[@15741tassle]

is there a way to make video camera input wirelessly into atem minipro? Just like what is in slingstudio but without delay. Thank you

[@Fsosrecords]

high music and low speach :-/

[@gcavy1]

so if someone could help clarify for me. Does the minipro allow streaming to KZbin by itself, or does it still require a computer for its network connection? Can a user simply connect it to an internet connection then enter the stream key to connect and then stream?

[@gcavy1]

I want to clarify my question. I know you need a computer connected to setup the ATEM Mini Pro and make changes to the settings, cameras etc. But once its setup, can I stream without a computer connected? (just the ATEM, cameras, ethernet connection, monitor, power?) Going to use this for a house of worship, and was hoping to not buy a dedicated laptop to go with it. thanks!

[@mikeanderson8375]

Awesome video my friend!!!! Would you be able to suggest a reasonable lens that would work with the Canon M50 for me to be able to control the zoom funtion through the mini pro? I am hoping to have this camera mounted high up as an overview shot and want to be able to zoom in and out at times. THANK YOU!!!!

[@1SourceVideo]

Thanks Mike. You can only control Blackmagic Pocket Cameras from the ATEM Mini Pro

[@vincentrema1006]

Do you need OBS software or sort to work alongside that ATEM Mini pro?

[@kduane1]

What kind of split screen can I do with this other than PICTURE_IN_PICTURE?

[@fv3video]

Can send audio from my x-32 console to the mic inputs and are they panned left and right or would I have to do it in the software?

[@DirectorMj]

Does atem mini or pro support NTSC Cameras? Or Devices.

[@christmiraclecenter]

Will the ATEM Mini Pro work on macOS 10.13?

[@sjstudiotv2011]

Question. Does the Atem Mini Pro heat up after prolonged operation. Thanks

[@1SourceVideo]

Not significantly.

[@GROCMUSICCO]

So talking with Blackmagic support I've found this to be a bit disturbing. Whenever the media is removed from the ATEM Mini xxx the drive is still mounted. Meaning the data could possibly become corrupt or even damage the drive. I haven't used the unit long enough to determine that this could be a problem but I'm sure it would be. I've only been in the computer business for 30 years but I do see this as a problem.

[@TonyVentura]

Is it possible to use it with restream.io other websites that multistream? I dont want to stream only for one channel like youtube that u showed in the video

[@AnthonyFlemingCorkCity]

Yes. kzbin.info/www/bejne/mX-Uk6iwf8prmK8

[@SluTubeTV]

So can I use this to record serato video mixes ? And track em out .. edit . Ect ?

[@markshirley01]

Hi - I was originally going to buy the mini but some reviews recommended using a encoder with it. Does the Pro add an advantage in having a more stable livestream with having a encoder included. Note: I don't need the multiview or BM camera control as features The recording feature is very useful tho.

[@1SourceVideo]

The Pro has a built streaming engine. Its optimized for streaming compression so you get better compression quality, smoother motion without dropped frames, and the settings are much simpler. What platform are you planning on streaming to?

[@markshirley01]

KZbin Facebook or Instagram.

[@eecorr]

Sounds like a solid device.. I think I should try it out first before buying. Keep up the good work 🫶🏼

[@piatallgren]

I am a new user and very delighted to see the interface with Ecamm and Restream.io. My audio card in my Mini Pro crashed yesterday. any idea what caused it?

[@nathan122591]

Looks like a great product. However, I'm a little confused on the Ethernet/WiFi portion. So, is this unit able to directly connect to a router via Ethernet, or does it have to get routed through a computer? And if it does have to go through a computer, is the computer just giving the unit internet via WiFi direct? And if that's the case, is there any loss in quality/delay in having to do that? Thank-you.

[@1SourceVideo]

The Pro can stream directly to your destination without being connected to a computer. If you do connect your switcher to a computer the Pro can share the computer's internet connection. This can be either a wired connection or the computer's wifi. A wired connection (instead of wifi) for streaming is always ideal!

[@isaacrojas2078]

Can you output preview/multiview to the usb-c or ethernet, while using the the hdmi as your multiview? Also, can you do ethernet to hdmi via converter? Thanks.

[@1SourceVideo]

You can't output preview or multiview to the USB-C or ethernet.

[@uprobo4670]

Hello, Thanks for the video, I have one question , Can I stream in 1080p and Write to disk in 4 or 8k (The original output of the camera)?

[@Alecxace]

no

[@andremalcolm_studio]

Is it possible to stream KZbin, twitch, X, & amazon live on the pro at the same time?

[@benugdsen75]

How do I connect a mulit channel mixer to this setup? I have an 18 channel X-Air mixer and I need the mulit channels to work with streaming.

[@1SourceVideo]

We connect a 15 channel mixer to the mic/line input.

[@carmenb1059]

Can you stream to 2 sources at the same time - KZbin and Facebook?

[@lullullullul]

Nice informative video! If I could offer a piece of criticism I would say that the mixing on the sound can be a little better. The music drowns out your voice. Other than that thank you so much!!!

[@ShazammtheProducer]

Does anyone know if you can use the ATEM 1 M/E Advanced Panel with the Atem minis instead of only using the software?

[@1SourceVideo]

Yes you can use any of the ATEM Control surfaces with the ATEM Minis!

Excuseme, i have one 2nd Atem mini pro, but it doesn’t have green light in button, can you help me?

[@ScoTreVan]

How do you screen capture Multi View to be able to show it to someone for example over zoom and screen sharing?

[@1SourceVideo]

You will have to connect a recorder to the HDMI output of the Mini Pro...or to do it live, you will have to connect it to a capture card.

[@ScoTreVan]

@@1SourceVideo Thanks, I have ordered an Elgato Capture Card to use the live option, much appreciated

Thanks, and how is possible connect internet for go live stream ? When I have LTE Wifi router, I must connect ethernet cable from router to Atem and my notebook using same router for wifi ? And how I must connect Atem to notebook ? I can"t use other external monitor. Thanks for help :-)

[@keithchester4425]

Can I add any video source without the need for a capture card?

[@1SourceVideo]

Cameras, media players, and computers all work fine directly to the HDMI ports.

[@triumphantlifechristianchurch]

Do I need an encoder to stream live with the ATEM Mini pro? I have an older computer and my processing power isn't the greatest. Thanks in advance.

[@1SourceVideo]

Nope! Thats the beauty of the ATEM Mini Pro. Unlike the regular ATEM Mini, it has a built-in encoder that does all the heavy lifting. You can actually use the ATEM Mini Pro and stream to the web without a computer at all.

[@triumphantlifechristianchurch]

@@1SourceVideo Great thanks for answering that question. Now this brings me to another question. Don't we need a computer to access the controls to send the stream to youtube or facebook? I thought we needed to connect this via LAN line so we can access that. Also, is the blackmagic ATEM mini Pro encoder reliable? I've heard that the RESI Ray encoder is one of the best but it costs a lot of money. Can you shed some light on that? Thanks team really appreciate the time.

[@1SourceVideo]

@@triumphantlifechristianchurch Yes the ATEM encoder is incredibly reliable. To adjust all of the setting of the ATEM Mini Pro you will need to connect it to a computer. This can be done by connecting your comp to the USB C port or by using the ethernet. If you use ethernet, you can connect the ATEM Mini Pro directly to your computer and share your computer's wifi....or you can create a network using a cheap ethernet switch. If you need help with this, I can help walk you through this process.

[@triumphantlifechristianchurch]

@@1SourceVideo Fantastic. Thank you very much for your help. I will definitely reach out.

[@timjaycox7234]

What is the longest distance you can have for an HDMI cable, to control these cameras? Are you able to convert to SDI, and still control? I haven't been able to find much information regarding this.

[@1SourceVideo]

HDMI can only go 50ft at most without being boosted, but I don't know if I would I trust it at this distance. You should be able to control your cameras as long as you are getting a video signal. You can't convert to SDI...this was one of the first things I tried.

[@albaprime]

1SourceVideo why couldn’t you convert to SDI? What was your setup to try this?

[@1SourceVideo]

@@albaprime Let me rephrase that. Of course you can convert to sdi and get video signals. I had my pocket camera, converted it to SDI, then converted back to HDMI at the ATEM. While I still got my video signal just fine, I was unable to make changes to my camera from the Software control or get tally, etc.

[@1SourceVideo]

I should mention that I was using Blackmagic converters as well.

[@albaprime]

1SourceVideo Okay. Perhaps this product wasn’t designed for tally and talkback since it’s targeted at the consumer/prosumer market? I didn’t think that camera control commands could be transmitted down HDMI. Also, data is flowing from the camera to the switcher in one direction anyway right?

[@olisamaxwell6718]

Does it has an output

[@arhauz9719]

sir, if you connect ssd at type c output...where can i connect my laptop to have the software control active as well?

[@1SourceVideo]

Connect your computer using the ethernet port. This can either be a direct connection or you can have both devices connected to the same local network.

[@arhauz9719]

@@1SourceVideo thank you sir. i found it.

[@ASMRpoke]

Can you stream at the same time to multiple platforms? Facebook, KZbin, etc.

[@juzzonmorris]

Is there any way to stream to Google Meet? Google Meet doesn't have a streaming key code.

[@josiahurban]

On the Atem mini pro, there is a usb c output. if you connect this usb c to your computer, your computer will recognize it as a webcam. On google meet, under settings and video, you can select the Atem mini pro as a webcam.

[@spiroangelatos4274]

You mentioned, "all these recordings, including your SSD RECORDING, will be sync'd". How can the SSD recording be sync'd when the ATEM Mini USB-c does not record isolated inputs?

[@1SourceVideo]

Yeah...that doesn't make any sense. its an MP4...you're right.

[@lloydyana4833]

Does it have lower third capability?

[@1SourceVideo]

Yes, you can load in still PNG images into the switcher. Unlike the other Blackmagic switchers, you can't load PNG sequences, but with macros, you can program them to fly in and out.

[@JansenBispo]

Hi, How do you activate the green indicador on the buttons 1 - 4 to preview the cut? I tried activate but didn't work. When I press the buttons ATEM switch directly to the camera. I want to the see the next camera on the Preview window just pushing the buttons 1 - 4. The option in Preferences: Transitions operate as: Program/Preview is checked. It only works when I chose the next CAM in the ATEM Software Controle in Preview and then use the manual lever to transition the cameras. What can I be doing wrong? Thanks for help.

[@1SourceVideo]

Connect your Pro to your computer with USB C and open the "ATEM Setup Application." In the configuration menu you can change it to "Program Preview." Took me awhile to figure that out too lol

[@JansenBispo]

@@1SourceVideo Wow!!! Thanks. I was trying directly on the Atem Software Control. It's alright now.

[@petermaina9579]

Nice video, just wished you spoke a little louder and/or turned down the background track

[@70mmdp]

good information, but much of the narration is lost in the background music, hire an audio mixer next time.

[@TylerTripsTunes]

Where can I download the software from?

[@1SourceVideo]

www.blackmagicdesign.com/support/

[@PeteYagmin]

The music is WAY TOO LOUD - to the point where it's distracting.

[@1SourceVideo]

Sorry.

[@murdochmaclean4995]

The foreground music track is too loud. Ruins what would otherwise be a helpful presentation.

[@Eyeshotify]

Music is too overpowering....

[@iheziechukwunenye8085]

Pls can you use HDMI Television for split?