Blaster Garage Door Lubricant - Product Review (Andy’s Garage: Episode - 423)

[@antoniomarc7174]

Does seem to work well this is what I use and I apply 2 times a year is how I do mine…👍👍👍

[@lynnmattingly2582]

Pro tip: Lube from the bottom to the top (spring last) to keep from having to wear a shower cap to avoid overlubing the toupe'.

[@brettmullins751]

Great video. thx for sharing the video

[@Longeno55]

Nice review Andy! I'm going to get a can of Blaster Garage Door Lubricant on my next trip to town!

[@PhillipsVision]

@@Longeno55 👍

[@johnnyace1954]

I was told it works great on rubber car window tracks. My power window on the drivers side moves very slow thanks

[@PhillipsVision]

Could also be your power window motor starting to go

[@MarkWright-np9hf]

Thanks Andy!

[@paulastill3435]

Great video..but can't use it if you can't get the cap off! Still waiting.....

[@paulastill3435]

Thanks SO much! I discovered this several.months ago. LOVE IT!

[@jjflan1]

Does anybody else have a problem with this dripping after its applied? Should you be rubbing it in with a cloth or something?

[@ramseyzakaria1333]

Hey Andy, off topic but i’m trying to replace the valve gasket covers on my fiero and i’m having some difficulty accessing where the gaskets should be. Any help would be appreciated, thanks in advance.

[@PhillipsVision]

If you have the V6 GT Engine, the valve covers are just below the Plenum. One facing the trunk and one facing the firewall. They are just above the spark plugs. The gaskets are underneath the covers once you remove them.

[@ramseyzakaria1333]

@@PhillipsVision I do indeed have the V6. My issue is when I tried to remove the covers I didn’t have enough room even when I had the intake manifold plenum taken off.

[@PhillipsVision]

@@ramseyzakaria1333 should just pull right up, then slide out

[@ramseyzakaria1333]

@@PhillipsVision The valve cover gets stuck on the intake manifold and there’s not enough room, I think i’ll have to remove the intake to access It honestly

[@hamidizadi]

Anyone compare this product to fluid film or surface shield??? I feel like those two would last longer.

[@rusted5408]

Is it sticky?

[@PhillipsVision]

No, just slick

[@Howard2006]

Is there any residual smell after applied?

[@PhillipsVision]

@@Howard2006 No

[@Howard2006]

@@PhillipsVision Thank you for your reply; what about dripping onto cars after the application? That would not go over well!

[@PhillipsVision]

@@Howard2006 I emptied my vehicles from the garage when applying and cleaned any dripping before bringing vehicles back in

[@paulone65]

wow thats some good lub

[@malin7919]

Didn't lube the chain?

[@MyCatCarriesAGlock]

No -_-

[@TheeRocker]

next video, How to Replace a Broken Chain lol.