Blender 2.83 Car Modeling - Part 2 [The Hood]

  Рет қаралды 209,210

NArF - Natural Art Freak

NArF - Natural Art Freak

Күн бұрын

Пікірлер: 353
@blitzTheAVR16U2Enthusiast
@blitzTheAVR16U2Enthusiast 4 жыл бұрын
This could be a 200$ course but you are giving it away on youtube for free! Thank you so much! I absolutely love the workflow you use.
@chinonsonwishienyi7153
@chinonsonwishienyi7153 4 жыл бұрын
My confidence level just went thru the roof seeing what I am achieving following these steps. Thanks man. Much respect
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
You're very much welcome...
@drumboarder1
@drumboarder1 2 жыл бұрын
I felt the same when doing a car in 3ds max back when, juuuuuust be sure to check the mesh from many angles, I had some hilarious topology from certain angles that I didn't pick up on for a while
@nickmarkantonis9808
@nickmarkantonis9808 3 жыл бұрын
I've been searching for a valid youtube tutorial on car modeling and finalyu I have found the best one. All the other where either low poly or where just sweeping throught the steps but this one is perfect
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
You're welcome
@apioude5718
@apioude5718 Жыл бұрын
You are the greatest blender channel i ever seen bro!
@YousufMohammed98
@YousufMohammed98 4 жыл бұрын
I love how confident you are with your modeling skills. Never seen anyone apply two solidify modifiers this early on. Great work bro ❤️
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
Thank you
@ihzanursyahbana7773
@ihzanursyahbana7773 2 жыл бұрын
i has saw 8 and more about cars modelling and your video is the only one who has a great workflow. especially when you placed verticies directly on the right way, thanks for it
@luccarelli1981
@luccarelli1981 Жыл бұрын
The methodology he uses and mastery of the tool are exceptional. Congratulations on the excellent work.
@janrdoh
@janrdoh 3 жыл бұрын
Just followed this and wow it is the cleanest model I have ever done and totally different from how I learned to do it.
@rishabhbhattarai6358
@rishabhbhattarai6358 3 жыл бұрын
Just started today! Can't wait for this journey, I've skimmed through all your videos and they look very good.
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Thanks, hope you like it at the end and would love to see your results...
@huyinh1856
@huyinh1856 3 жыл бұрын
You're the most meticulous 3D artist I've ever known, thank you for your turtorial from a Vietnamese fan.
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
You're welcome, I'm glad you like it...
@k0omodosavesta241
@k0omodosavesta241 3 жыл бұрын
That just the best car modeling series on YT
@dynamitrex3975
@dynamitrex3975 4 жыл бұрын
Was weary of using loop tools for modelling complex structures till I saw this... great work!
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
Thanks, glad it helped.
@liliango52
@liliango52 4 жыл бұрын
You're very clear and concise with your instructions. This is my first car that I've taken seriously and I'm actually starting to enjoy it!
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
I'm really glad you are...
@guardmark
@guardmark 4 жыл бұрын
Great like how you mention everything you do and not just leave it to screen keys, great video, I’m a newby to blender and theses have helped a lot.
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
You're welcome
@bombinator
@bombinator 4 жыл бұрын
Amazing work, you make it seem so easy but we know that its pure talent!
@haruna.3059
@haruna.3059 3 жыл бұрын
i had 0 idea what any of that was but i enjoyed watching it anyway
@apoorvbajpai4763
@apoorvbajpai4763 11 ай бұрын
there is a slight issue at the side of the hood. The surface which is portrayed by 'the line that disapears', does not end with the edge of the hood it actually carries over to the door and ends just before the surface for the vent cut out starts. Please check the reference image. the blue print itself has got it wrong. I will try to make that change when i am modelling my car. this is my first serious modelling project on Blender... wish me luck!
@robertburgin8110
@robertburgin8110 2 жыл бұрын
Thanks! I'm studying these vids for tips and tricks and kinda just how to get good, it really helps. also, is that a rooster in the background?
@云井彰
@云井彰 3 жыл бұрын
Amazing!Reminding me of nurbs modeling!I love this tecnique.It takes away those terrible loop confusions.I’ll try it!
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Glad you like it.
@janrdoh
@janrdoh 3 жыл бұрын
I thought I was decent at modeling until I saw this. Subbed because I learned something and you are using the same HDRI I use.
@AnanthakumarBalakrishnan
@AnanthakumarBalakrishnan 3 жыл бұрын
bro a tio you made sharp at time 17:30 instead of creating two loop cuts select a edge loop and bevel for the equal bi directional edges for that by doing this you will get a nice two sided loop
@techlappy4055
@techlappy4055 4 жыл бұрын
I've been doing vehicle modeling from last 4months only when I though there is nothing more I can learn about this topic you taught me few new things thx
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
glad to help. ☺
@techlappy4055
@techlappy4055 4 жыл бұрын
@@NaturalArtFreak 👍🏻you are dam active 🤣 super fast replies
@techlappy4055
@techlappy4055 4 жыл бұрын
@@NaturalArtFreak quick question how many polygons did you reach in this whole car project of yours
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
@@techlappy4055 I haven't finished this particular car yet.
@techlappy4055
@techlappy4055 4 жыл бұрын
@@NaturalArtFreak kk looking forward to more content.
@lostplaeyr9680
@lostplaeyr9680 4 жыл бұрын
I finally manage to model a car. Will finish your tutorial car to the end. You show me new techniques that actually make work easier and simplify modeling. Really crazy tutorial, Bro: D It works for me (although I have no plan what you are saying: D, because I unfortunately only speak German), but it looks almost as good for me as in your video (but only almost): D And if I ever understand your techniques without knowledge of English, then everyone must understand it: D Thank you, buddy. You are really good teacher;)
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
You're very welcome.
@220croa
@220croa 2 жыл бұрын
thank you for this tutorial series, it's really helping me a lot on my first time!
@italianinkscapechannel
@italianinkscapechannel 4 жыл бұрын
Got a problem at 9:34, pressing ctrl+R creates an edge loop, not a new node, no matter I'm on Vertex selection. I've to subdivide the edge using the contextual menu (Mac user on 2.82). Great tut, btw, thanks.
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
Yeah CTRL+R gives edge loop.
@italianinkscapechannel
@italianinkscapechannel 4 жыл бұрын
@@NaturalArtFreak Ok, there are no faces to split, so only vertices are created, isn't it?
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
@@italianinkscapechannel adding in edge loops splits the face unless I'm misunderstanding what you mean...
@italianinkscapechannel
@italianinkscapechannel 4 жыл бұрын
@@NaturalArtFreak It's ok. I miss to note that you're splitting a part without a face -while I have one on mine, so the result seems different to me. My fault, solved. Thank you again!
@RC-Heli835
@RC-Heli835 Жыл бұрын
Its amazing how well your plans line up from view to view. I'm building a 1959 Ferari 166MM touring Berlinetta and the free plan i found online is way off on some pretty important lines. Its kind of like a stretched out more classy volkswagen beetle from years gone by.
@Kiritokun2027
@Kiritokun2027 5 ай бұрын
from where you get blueprints of model
@RC-Heli835
@RC-Heli835 5 ай бұрын
@@Kiritokun2027 I found it in images searching the model images.fineartamerica.com/images/artworkimages/mediumlarge/1/ferrari-166mm-lemans-berlinetta-blueprint-poster-eastern-prints.jpg
@milanaryal9439
@milanaryal9439 Жыл бұрын
Thank you! You Saved my life! Best tutorial ever on this topic!
@sparkingdude9942
@sparkingdude9942 4 жыл бұрын
your tutorial = very good your talent = very well your explanation = very good your ability = very good your skills in blender = very well understandatation of common people = very well the ubderstandatation of me = very bad it doesn't mean you are bad, You are the unique one but about me it's very very bad
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
Really sorry about that.
@shynnobi
@shynnobi Жыл бұрын
Thank you for this amazing tutorial serie! I just finished the hood and it looks wonderful, let's goo
@user8lll
@user8lll 4 жыл бұрын
wow i like the way u made the video
@user8lll
@user8lll 4 жыл бұрын
when is the next tutorial
@shivanshu1876
@shivanshu1876 2 жыл бұрын
Thank you for the course
@CGSTUDENT15
@CGSTUDENT15 Жыл бұрын
Bro such a helpful tutorial that i believed i learned Lot of thing from this
@EsportsLPL
@EsportsLPL 4 жыл бұрын
Excellent, must read it from the beginning sometime and learn from you!
@frd8791
@frd8791 4 жыл бұрын
Great tutorial... one of the best I've found (teeny tiny comment, please enable keystrokes, would love to see what hot keys you're pressing)
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
I keep forgetting to enable them sometimes...
@ianm1898
@ianm1898 4 жыл бұрын
hopefully you have more client thats it, I really thanks to you, you want to share this kind of tutorial,awesome
@haudtalis5036
@haudtalis5036 Жыл бұрын
Magnificent, precise, meticulous work, admirable! You have a wonderful spatial imagination. Question: Would you like to add a car worthy of your craftsmanship to your virtual garage? A Jaguar Mk II. The topology of this 'beast' muzzle makes me feel powerless and sick. ☹
@kingofgods-w3t
@kingofgods-w3t 4 жыл бұрын
your content is GOLD
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
Thank you.
@mwsiviero
@mwsiviero 4 жыл бұрын
Interesting your technique using 2 solidifiers... first time that I saw that.
@projectbliss6658
@projectbliss6658 3 жыл бұрын
bro your tutorial is good but one small request, pls say the reason for doing each step, i can follow each step but i don't understand why i'm doing it
@coco_jjunu1021
@coco_jjunu1021 4 ай бұрын
1:22 It appears transparently.
@David-jd3hc
@David-jd3hc 3 жыл бұрын
Great tutorial, much appreciated!
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
You're welcome
@furkanozer3869
@furkanozer3869 3 жыл бұрын
27:58 Selecting only rim option, vertexes do not bend inward as shown in the video. On the contrary, vertexes bend outward. What should I do?
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Recalculate normals SHIFT+N
@furkanozer3869
@furkanozer3869 3 жыл бұрын
@@NaturalArtFreak Thank you so much.
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
@@furkanozer3869 you're welcome
@adiletrysbekov1647
@adiletrysbekov1647 Жыл бұрын
@@NaturalArtFreak What if I recalculated normals but nothing happened
@racevoltnft6740
@racevoltnft6740 Жыл бұрын
hey where i can find that modifyer that loop tool modifiyer that u use becasue i thri to use that but i cant in install addon or that list i dont know whats bthe name of that list
@baskapes762
@baskapes762 3 жыл бұрын
This is EPIC bro
@brunojurican5413
@brunojurican5413 3 жыл бұрын
you can use pureref for reference images its easier and it doesnt takes up space in blender viewport !!!
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
sure thanks mate
@creameh3718
@creameh3718 2 жыл бұрын
Im on blender 3 tried to add the solidify modifier but the vertex didn't show up it only shows up for the Plane
@alexandertyurin9423
@alexandertyurin9423 4 жыл бұрын
Sorry for my English. I don't understand how to move the dots when pressing Sx2, as in 3:18. I can't do that. (((
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
S and then X
@alexandertyurin9423
@alexandertyurin9423 4 жыл бұрын
@@NaturalArtFreak Oh, tnx!)
@NeisanDesu
@NeisanDesu 3 жыл бұрын
I'm quite confused at 3:09, i did shift and right click but it just ends up moving my cursor to world origin.
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Means your selection button is left click not right click...
@MallikarjunBhogavi
@MallikarjunBhogavi 3 жыл бұрын
Amazing!!! You're awesome!!
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Thanks
@oozly9291
@oozly9291 4 жыл бұрын
Wow this is incredibly well done and easy to follow
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
Thanks
@ameersohail1430
@ameersohail1430 3 жыл бұрын
this guy is god !!
@prasantgokhale660
@prasantgokhale660 4 жыл бұрын
brother your tutorials are awesome i learnt a lot from it just consider showing key presses so we what type sometime is helps
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
Yeah i made sure of that in the part 3.
@TeslaDIY
@TeslaDIY 2 жыл бұрын
when i hit "W" i don't get that loop tool, and i don't see the spacing tool, what am i doing wrong? version 2.93.4 here
@CustomGraphixYT
@CustomGraphixYT 3 жыл бұрын
at 28:00 when i apply the solidify there is a seam along the center of the hood for me, how can i fix this? it only works fine if i apply the mirror, not sure if this is a 2.9 thing
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
It's a general thing, which I'm pretty sure i fixed in the video but just select all the center vertices and delete Faces...
@CustomGraphixYT
@CustomGraphixYT 3 жыл бұрын
@@NaturalArtFreak ahh i just looked ahead, seems it happened to you after, for me it was on the first solidify which is why i didnt see the fix you did since i wasnt at that part yet
@abd-elrahmankhalifa4453
@abd-elrahmankhalifa4453 3 жыл бұрын
amazing work bro!
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Thanks man
@novessel6822
@novessel6822 3 жыл бұрын
How do you follow up the F at 12:00? Thanks for the great tutorial!
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
You just keep pressing F
@alejandrodolinsky7517
@alejandrodolinsky7517 3 жыл бұрын
You Are amaizing!!!! Great Tuto!!! a question were i can get blender car paintig texture? or i have to create one!!! tkx again
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Yeah creat one, there's one at the end of this series...
@MartIn-bn7yy
@MartIn-bn7yy 3 жыл бұрын
❤️❤️❤️ thanks for sharing bro
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
No problem
@seeking9145
@seeking9145 3 жыл бұрын
3:41 I only hear what google subtitle hear: press double choose loop twos :((
@alexandertyurin9423
@alexandertyurin9423 4 жыл бұрын
help me plz. I do not understand how to properly shift the arc at 23:29
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
S and then X then type 0 for each 2 vertices selected...
@G-point-ki7ze
@G-point-ki7ze 12 күн бұрын
I have made my own carpaint for my car at the finished model but can I apply this to other cars
@Augu162
@Augu162 3 жыл бұрын
Hey sir, great content...i just have a quick question...what's the difference between shift cntrl s and a simple scale?
@Autoexposeid
@Autoexposeid 3 жыл бұрын
nice tutorial
@yera_chad3352
@yera_chad3352 3 жыл бұрын
I didnt know about loop tool Thank you BROO
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
You're welcome
@abirsarkar7075
@abirsarkar7075 3 жыл бұрын
Sir could you please make a tutorial on how to model custom car designs or free form a car if we only have the side view of the car. Thank you for your effort and it is really helpful video.
@srikarb54
@srikarb54 3 жыл бұрын
You're soo good at this
@marcelobravo3074
@marcelobravo3074 2 жыл бұрын
there is some way to make sharp edge by modifier with out making definitive modifications in the mesh?
@Anuragrdx-03
@Anuragrdx-03 3 ай бұрын
Hii, the matcap is unable to download😭
@RaushanKumar-sk8lu
@RaushanKumar-sk8lu 2 жыл бұрын
Hi, I followed the steps for modeling the bonnet, but in the end while using solidify modifier, the model is not showing vertexes in edit mode. Can anybody help, I m using blender 2.93 version?
@NaturalArtFreak
@NaturalArtFreak 2 жыл бұрын
Raclculate your normals with SHIFT+N
@mindforge481
@mindforge481 2 жыл бұрын
YOU ARE A LEGEND
@mycatatemylego2076
@mycatatemylego2076 3 жыл бұрын
this tutorial is the best i have seen on youtube, but for some reason i cant add on a matcap, maybe its because im in a later version im not sure
@digvijayyamagekar4300
@digvijayyamagekar4300 Жыл бұрын
can someone please help me out here ? When i do collapse edges and faces i dont see that green dot which is seen in this tutorial
@pareshbhandarkar8078
@pareshbhandarkar8078 2 жыл бұрын
How to get period option ?
@JM_Design3D
@JM_Design3D 3 жыл бұрын
eres un genio estoy asombrado por tu forma de trabajar, que gran trabajo haces.
@seeking9145
@seeking9145 3 жыл бұрын
5:01 Here my pc select not only the edges but also the faces
@simcity9918
@simcity9918 3 жыл бұрын
Why do we apply 2 solidify modifiers. I don't see any difference while applying the second one. Can someone please say why?
@cgcut8968
@cgcut8968 3 жыл бұрын
really good tutorial
@wahyuagungindonesia
@wahyuagungindonesia Жыл бұрын
good course
@alexandermushibwe4745
@alexandermushibwe4745 3 жыл бұрын
I can't move the camera while extruding please help I'm stuck
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Yeah you can't move while extruding...
@alexandermushibwe4745
@alexandermushibwe4745 3 жыл бұрын
@@NaturalArtFreak thanks. By the way thank you for your series they could be paid courses but you did them for free. Looking forward to supporting you on patreon
@vedarthchodankar6845
@vedarthchodankar6845 3 жыл бұрын
I am having trouble after solidifying hood there is a line where mirror modifier is used
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
You are supposed to delete those extra lines...
@vedarthchodankar6845
@vedarthchodankar6845 3 жыл бұрын
Which extra lines
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
@@vedarthchodankar6845 where you have the issues, i did that in the video... Didn't you see it?
@vedarthchodankar6845
@vedarthchodankar6845 3 жыл бұрын
I'll just look the video again
@kevinvo9771
@kevinvo9771 Жыл бұрын
Do you have blueprints of bmw models (F10, F30, G20, G30, etc)?
@thariq7616
@thariq7616 4 жыл бұрын
Hello..why when i use period theres no active element option ...there is a selection active and cursor to active...when i try to choose selection active ...all vertex is merge...how????sorry im new user of blender switch from 3ds...n now ..i try to adaptation 😅...thankssss
@peterporker1990
@peterporker1990 4 жыл бұрын
So far everything's going great! :D
@Light_assassin27
@Light_assassin27 Жыл бұрын
I love this tutorial but I have one question. What did you do to make the blueprint, it is very helpful and I would like to learn how to create them so I can make any car. Thanks in advance!!
@thariqarrozzaq4615
@thariqarrozzaq4615 4 жыл бұрын
i love how you make tutorials about car modeling...but when i try to modeling car ..when i use subdivision in my car model..sometimes there is a weird line..next can you explain in your video ..how to arrange good vertex when u use subdivision...this is hard for me i search a lot of tutorial in youtube but i never find someone who explain in detail...i hope you know what i mean..thanks...
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
Yeah I do, sure.
@vaidanubhav
@vaidanubhav Жыл бұрын
How to make the vertex look green and bold the way it is in the video? As it's much easier to work on
@seeking9145
@seeking9145 3 жыл бұрын
2:51 way too fast. Did he say hold an control? I get just a new verex D:
@albinjohansson647
@albinjohansson647 Ай бұрын
1:32 how you do that?
@mycatatemylego2076
@mycatatemylego2076 3 жыл бұрын
when i apply the solid mod it deforms the shape, i have done everything i can with the vertices but nothing will fix it.
@china-understanding9837
@china-understanding9837 2 жыл бұрын
guy, u r great
@sagitta98
@sagitta98 3 жыл бұрын
So it's okay to make triangle for high poly model? I thought you *MUST* make everything in quad.
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
You MUST TRY to make everything quad, In some cases you can't make quad you make a triangle, what you have to absolutely avoid is n-gons... Most high poly models end up being triangulated anyways...
@sagitta98
@sagitta98 3 жыл бұрын
@@NaturalArtFreak Thanks for the advice. I've been forcing my car models to be on solid quad and I never satisfied with the end result so I decided to remodel it many times and still haven't finished it.
@x.ROCKSTAR.x
@x.ROCKSTAR.x Жыл бұрын
why i cant doing thisss. arghh! i stuck when it come to start . i cant make it extrude and make a line like this video. what i'm wrong. damnnn
@glowmediaZW
@glowmediaZW 4 жыл бұрын
Thanks bro, You're the best.
@NaturalArtFreak
@NaturalArtFreak 4 жыл бұрын
You're welcome!
@kxphyy922
@kxphyy922 3 жыл бұрын
u are the best, thank you man, I suscribed and I'm going to do a Impala 4 homework, ty
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Glad I could help!
@vasimkhan-id2up
@vasimkhan-id2up 2 жыл бұрын
What you press on time code 18:50
@ratnapilla182
@ratnapilla182 3 жыл бұрын
Can we draw design like auto cad because I want to implement own design
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Yes if you have the CAD design you could just import and retopo...
@felix-qz4dg
@felix-qz4dg 3 жыл бұрын
This is really good. Can you tell us where did you find reference images? Is there any website or something else for reference images of any object?
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
My reference images are mostly from caricos.com ... But If you're referring to blueprints, I make them myself...
@felix-qz4dg
@felix-qz4dg 3 жыл бұрын
​@@NaturalArtFreak Is it possible for you to make a video for the blueprints. I mean how you made them. By the way, thank you
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
@@felix-qz4dg I am working on a video like that...
@hanguyenduykhoi4931
@hanguyenduykhoi4931 2 жыл бұрын
could you share to me and everyone your blue print library? i really need that for my project. thank youuuu
@SumedhVersatile
@SumedhVersatile 3 жыл бұрын
Sir can this work on blender 2.91??
@NaturalArtFreak
@NaturalArtFreak 3 жыл бұрын
Yes of course
@SumedhVersatile
@SumedhVersatile 3 жыл бұрын
@@NaturalArtFreak thankyou sir
@imbroke6354
@imbroke6354 3 жыл бұрын
The green dot represent as a vertical. It's
Blender 2.83 Car Modeling - Part 3 [The Front Bumper]
32:41
NArF - Natural Art Freak
Рет қаралды 75 М.
Blender 2.83 Car Modeling - Part 1 [Preparing The Workspace]
8:39
NArF - Natural Art Freak
Рет қаралды 97 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
How To Learn Blender Part 8 - Car Hood and Fender Practice #Blender
30:38
Learn Everything About Design
Рет қаралды 38 М.
Master Car Design in Blender: Discover the Game-Changing Tool! - Bevel Weight
10:55
How to model a car in blender (PART 1)
23:37
Praize3d
Рет қаралды 35 М.
How to Create Professional Materials
11:23
Kaizen
Рет қаралды 1 МЛН
Car in Blender - PART I - Modelling [ Beginners ]
45:42
Blue Inversion
Рет қаралды 1,9 МЛН
Tire Modeling, Shading & Rendering in 26min | Blender 2.9
26:41
Damian Mathew (Badger)
Рет қаралды 98 М.
Blender 2.83 Car Modeling - Part 4 [The Doors]
35:44
NArF - Natural Art Freak
Рет қаралды 44 М.
Modeling LOW POLY muscle car in Blender - FULL TUTORIAL
54:18
Seven gray Cubes
Рет қаралды 44 М.