🇵🇭 BMW 116i N13 Direct Injection Engine. Angle offset "Solved"

[@tsepangnoko1962]

Well done I got the same problem

[@edralinbustaliniomcbautomo7707]

You solved it. Well that's excellent you made it.

[@s3obi]

Thanks for your video and I would like to ask your help and advice I have the same problem and I have change the cam shaft sensor but it doesn’t work I also have change the high-pressure pump but it doesn’t work as well Coil and spark plugs are new which part I have to change help me please F30

[@edralinbustaliniomcbautomo7707]

May i know the DTC and what does it mean? Camshaft sensor is not the fault. I will tell you now what you will do, it has a camshaft solenoid right. The intake side and exhaust side. Just swap that parts and I'm surely you will solve it...DIY.ok

[@alonsodelgado5503]

Hola, tengo un problema con un bmw n13 al encender el auto hace fructuaciones en las rpm luego se estabiliza, y también las hace a 1500rpm

[@edralinbustaliniomcbautomo7707]

Ipagpalit no lang ung dalawang soenoid Agad magbago andar ng makina mo.

[@luiscabral8645]

R u still in sheik garage?

[@edralinbustaliniomcbautomo7707]

Do i knew you? Please kindly acknowledge...

[@luiscabral7276]

Colleration CMP & CKP

[@edralinbustaliniomcbautomo7707]

If corellation yes but angle offset is the dtc..not corellation.

[@alexlimo6959]

You never show us how we do it.

[@edralinbustaliniomcbautomo7707]

As i had said, was i did swapping of intake and exhaust vanos. Thats it then the engine idle back to normal condition without replacing any parts.

[@bimmerhacks]

@alexlimo6959 I am not getting any logic in swapping the VANOS Solenoid. Did you try swapping it? Did it fix? In my assumption it should be a broken chain guide or enlarged timing chain.

[@edralinbustaliniomcbautomo7707]

@@bimmerhacks no it was'nt a timing chain or enlargement of the chain. As i said it was in the vanos solenoid only and without replacing any parts. Then its a matter of an excuses, the problem solved. Thats it.i did'nt do a longer video because out of time for editing.

[@bimmerhacks]

@@edralinbustaliniomcbautomo7707 I need the feedback from Alex as your solution might not work for others. Let's see his findings

[@bimmerhacks]

kzbin.info/www/bejne/jYW7n5xtadaVjq8 Solenoid swap must be just a coincidence fix