Thank you for a great, no-nonsense overview of the job. Also, seeing the extra 30 seconds taken to chase the threads was nice… a lot of backyarders skip those little steps. Hope the cars giving the owner many more years of enjoyment 👍🏻
@josemiguel89303 жыл бұрын
Me parece un trabajo fenomenal. Chapeu. Y encima solo y casi sin medios. Eres una luz que nos guía en este camino...... Magnífico.
@TheultimateDIYmachine3 жыл бұрын
Simplemente por un comentario así merece la pena el esfuerzo. Muchísimas gracias José Miguel!
@liudmilaioskevich85952 жыл бұрын
Excellent job and excellent video.
@rudi5317 ай бұрын
Great Video and great Beat 💪😀
@TheultimateDIYmachine7 ай бұрын
Thanks!!
@victorjaimegomez72155 ай бұрын
Buenas una pregunta que util usaste para centrar el embrague al ponerlo ? Es decir con que lo hiciste , y el cojinete de empuje que refería es el mio de Luk nuevo tiene mas juego que el tuyo y me preocupa si esta mal o no
@TheultimateDIYmachine5 ай бұрын
Buenas! El útil para centrar me lo fabriqué yo a partir de un vaso con punta torx que tenía. Del otro asunto, no recuerdo la referencia, venía con el kit completo que compré (embrague, con bimasa y cojinete).
@apimpnamedslickback72183 жыл бұрын
Doing this right now. Its a pain in the ass. But the video is helping alot
@KyleMontanaro8 ай бұрын
What's the reason for replacing the flywheel? Great Job! Love it when I see someone who takes care of a E39 with the 6-cylinder engine!
@TheultimateDIYmachine8 ай бұрын
Thanks! Sincerely, I replaced it just for preventative mainteneance.
@dannysstiventsthomasmoguel6493 Жыл бұрын
EXCELENTE TRABAJO, gracias por compartir tu conocimiento. Tengo una pregunta, si me pudieras apoyar te lo agradeceria bastante. El cojinete piloto cual es la numeración? Le estoy cambiando el cluth al mio es un 530i modelo 2004 El inconveniente es que le hicieron conversión y no le pusieron cojinete piloto y se averio la caja, agradeceria tu ayuda bro. Estoy en aprietos por esta citación
@TheultimateDIYmachine Жыл бұрын
La referencia original del recambio es 21517521471 cojinete de desembrague. Espero sirva de ayuda. Gracias a ti por comentar, saludos.
@datsoon9236 Жыл бұрын
Hey man, great video. Do you happen to have links to all of the parts? Specifically the smaller ones?
@akbarmahmood77413 жыл бұрын
thanks amazing video go ahead man , good job
@flyjohnson711 Жыл бұрын
The pre Sept 1997 clutch had a better feel on e39. I bought a 1997 540i 6 new in spring 97 and loved it. Sold it after a few months and missed it. Went back in 1998 and got a 98….and the clutch had this crappy spongy feel….not as responsive. I hated that clutch. Give me the non self adjusting one all day.
@zemuudene2808 Жыл бұрын
Hey, what happens if i take that middle shit out which is holding te fingers and then put all on and center it in my way.. will it work?
@omarvazquez58363 жыл бұрын
Buenísimos videos sobre BMW e39 muchas gracias un saludo
@TheultimateDIYmachine3 жыл бұрын
Me alegro que sean de tu interés! Un saludo
@DoubleJThe3 жыл бұрын
What flywheel is that? I've got a LuK flywheel and a Sachs clutch kit, it's a no go, the flywheel has a ridge that interferes with the Sachs disc.
@TheultimateDIYmachine3 жыл бұрын
I buyed a complete Luk clutch kit (flywheel included) and that’s the way to go. Otherwise vibrations, noises and installation problems might happen.
@cheikhtalibouya12 жыл бұрын
Do you remember the size of the socket used on the crankshaft pulley?
@TheultimateDIYmachine2 жыл бұрын
Yes, that’s for sure 22 mm!
@radosvetyordanov43512 жыл бұрын
how much does it weight?The dual mass flywheel?
@TheultimateDIYmachine2 жыл бұрын
11.29 Kg
@240hp-car92 жыл бұрын
Ilove bmw e39 thank you for video🤓
@michaelmarcus5093 жыл бұрын
Love the video thanks so much, plan on doing my own soon. Also what was the music?
@TheultimateDIYmachine3 жыл бұрын
Thank you too Michael for commenting! Music: God fury - Slyrax 👍🏻
@michaelmarcus5093 жыл бұрын
@@TheultimateDIYmachine no problem, can I ask what clutch and flywheel you went with. Did you go OEM? I’m looking into them now for my manual touring
@TheultimateDIYmachine3 жыл бұрын
Factory was Luk, so I installed a Luk clutch kit. No complaints at all
@hall89PL4 ай бұрын
Good Job
@blockpartyvintage15685 ай бұрын
Stock clutch? Is this an M50?
@TheultimateDIYmachine5 ай бұрын
Yes, stock clutch. M54
@iouriDemolder Жыл бұрын
C’est la même sur un 530 d e39 manuelle ?
@TheultimateDIYmachine Жыл бұрын
Je ne sais pas.
@ManuelLopez-ec2jp3 жыл бұрын
gracias a ti voy a poder cambiar el embrague al mio,raro que tenga tan pocas visitas:D
@TheultimateDIYmachine3 жыл бұрын
Me alegro mucho de que sirva de ayuda!
@g0ldensniper551 Жыл бұрын
hey do you remember the size of the flywheel bolts?
@TheultimateDIYmachine Жыл бұрын
M12X1,5X50
@latinmusic62582 жыл бұрын
Hola, me gustaría hacerte una pregunta? Yo llevé mi carro a un mecánico para ponerle el kit de cloche, se lo pusieron pero no me esta cogiendo los cambios y para poder lograr coger el cambio tengo que darle hasta abajo al pedal, que podría ser el problema? Espero la respuesta si puedes. Gracias
@TheultimateDIYmachine2 жыл бұрын
Hola, si antes de llevarlo al mecánico no lo hacía, es que probablemente te han instalado algo mal 👎🏼 Vuelve a llevárselo a que te lo revisen o cambia de mecánico!
@MassimoPannozzo7 ай бұрын
Bravissimo 💪💪💪💪💪💪💪
@alejandrogarciadulgheriu16672 ай бұрын
Mismo procesor para un 530d ?
@TheultimateDIYmachine2 ай бұрын
Básicamente
@alejandrogarciadulgheriu16672 ай бұрын
@@TheultimateDIYmachine recomiendas cambiar el volante de inercia siempre ? O si esta mas o menos bien, ponerle solo el disco y demas nuevo
@alejandrogarciadulgheriu16672 ай бұрын
@@TheultimateDIYmachine luk es la marca que traen de origen ?
@TheultimateDIYmachineАй бұрын
Siempre no, depende del estado en el que se encuentre, holguras y demás…
@TheultimateDIYmachineАй бұрын
Juraría que sí, por eso yo le instalé el kit de Luk
@Fosterforged2 жыл бұрын
Do you remember the part number for the kit you purchased?
@TheultimateDIYmachine2 жыл бұрын
Luk BR 0241
@TheultimateDIYmachine2 жыл бұрын
600 0187 00
@Fosterforged2 жыл бұрын
Thank you!!
@Kobra1843 жыл бұрын
Good Job !!!
@davidalvarez70053 жыл бұрын
hola amigo con que limpias el embrague el bimasa y el plato de presion .un saludo
@TheultimateDIYmachine3 жыл бұрын
Con papel de cocina y spray limpafrenos a mi me sirvió. Creo que lo ideal es alcohol isopropilico, pero yo no tenía a mano y usé lo anterior. Gracias por tu comentario!
@davidalvarez70053 жыл бұрын
@@TheultimateDIYmachine gracias por la respuesta amigo un saludo desde galicia cualquier duda consulta tengo 325i e46 325 e36 530d
@vosedon3 жыл бұрын
How many miles on this clutch?
@TheultimateDIYmachine3 жыл бұрын
180.000 miles.
@vosedon3 жыл бұрын
@@TheultimateDIYmachine wow that's cool. I'm currently at 152k and looking to tackle this job. Great video!
@tecnohome2.0782 жыл бұрын
Cual es la referencia del pitorro de plastico del empujador
@TheultimateDIYmachine2 жыл бұрын
21511223328
@tecnohome2.0782 жыл бұрын
@@TheultimateDIYmachine muchas gracias
@b.e.u.b2 жыл бұрын
👍🏼
@RaFiMuSiiC Жыл бұрын
Tea faltado acerle el cambio de aceite valvulina pa Acerlo completo completo
@TheultimateDIYmachine Жыл бұрын
Pues se lo cambié, lo que pasa es que no lo muestro en este vídeo, porque ya tengo un vídeo específico en mi canal, donde muestro cómo se hace el cambio de la valvulina. De todas formas, gracias por comentar!