New build has started, a 1985 #BMW #K100 RT. In this episode the OEM exhaust get's a decent chop and finished of in Cerakote C-serie. Stay tuned for the exhaust sound at the end of the video!
Пікірлер: 42
@revelationakagoldeneagle8045 Жыл бұрын
Brutal! Great looking exhaust! ✌️
@corner.custom Жыл бұрын
Thanks man!! I do sell these via my Instagram page, Corner.custom 👍🏼
@twistedfatebuilds2 жыл бұрын
Nice work Si, love the deep rumble 😍
@corner.custom2 жыл бұрын
Thanks mate 👊🏼👍🏼 Sounds so aggressive once shortened 💪🏼
@karimmuhtaseb7502 Жыл бұрын
Is it too loud for city driving? Im thinking about doing it my self but dont want enemies😂
@corner.custom Жыл бұрын
No imho it isn't too loud, but that's also dependent on your right wrist 😉 There are also some soundclips of the bike with this exhaust on my channel, the red K100
@karimmuhtaseb7502 Жыл бұрын
Haha, i like this guy😏 I have trauma from riding v4 with straight pipe😂
@corner.custom Жыл бұрын
Hahaha ok in comparison to a V4 with straight pipes it's quiet 😁🤟🏼
@abencomo2 жыл бұрын
Is the shorter exhaust now only clamped to the four manifold pipes? Will not the weight of the exhaust damage the manifold connection points to the engine block?
@corner.custom2 жыл бұрын
Yes the shorter exhaust is only supported by the manifold clamps. Haven't had any troubles with this setup and I know quite a few builder who did the same and all without any troubles
@christophermikrowelle70938 ай бұрын
Great Job! What did you use to clean the stainless? Sanding paper? Polish?
@corner.custom8 ай бұрын
I blasted the pipes in/outside with aluminum oxide and after that a brush to get the texture back 🤌🏼
@dominiclostaglia4300 Жыл бұрын
Did you cut anything out of the muffler or did you just shorten it?
@corner.custom Жыл бұрын
I didn't took anything out of the part that I've kept. I also sell these shortened exhausts via my Instagram page, Corner.Custom when interested
@Garfoid2 жыл бұрын
Nice. Want to do something similar but have it come out the other side.
@corner.custom2 жыл бұрын
Thanks! You mean the exhaust comes out on the swingarm side?
@Garfoid2 жыл бұрын
@@corner.custom yes
@corner.custom2 жыл бұрын
@@Garfoid I've seen some of those bikes on Instagram where the exhaust made a bend to the other side and had a similar end cap of the OEM exhaust. Looked good 👍🏼
@Garfoid2 жыл бұрын
@@corner.custom when you cut yours down did you have to make any mods internally to it.
@corner.custom2 жыл бұрын
@@Garfoid No just like the videos explained, no internal work necessary
@Srombi94 Жыл бұрын
What’s your rear width rim and what size is your rear tyre please ? Great job 👌🏻
@corner.custom Жыл бұрын
It's a OEM K1200 wheel with a 160/16/17 tires on it
@Srombi94 Жыл бұрын
@@corner.custom 5´´ or 5,5 ´´ width ?
@theone00702 жыл бұрын
Great job. Would you offer the service to modify my k100 oem exhaust? For sure for the price you ask for
@corner.custom2 жыл бұрын
Thanks 👍🏼! For now I'm busy finishing up my two builds, but there's a chance I'll be taking on work like this in the near future. Would be more towards end of the year though
@corner.custom2 жыл бұрын
I've made a batch of shortened K100 exhaust, just like the one in the video. Send me a DM on Instagram (Corner.Custom) and we'll sort it out
@slashdotism2 жыл бұрын
Damn that sounds mean
@corner.custom2 жыл бұрын
Sounds a lot more aggressive with a better flow
@karimmuhtaseb7502 Жыл бұрын
Do you need stainless steel welding machine to weld the muffle?
@corner.custom Жыл бұрын
Yes sir, it's a stainless exhaust
@garrethsnowball7872 Жыл бұрын
Hi, how close is the end cap to the inside pipes please?
@corner.custom Жыл бұрын
Approx 2 centimeter, but the majority points towards the end cap
@garfunkel2 жыл бұрын
Just wondering why you cleaned the stainless steel pipes only to wrap them with tape?
@corner.custom2 жыл бұрын
The pipes which are wrapped with tape is another build of mine some years ago. The cleaned up pipes will go on my recent build which is 95% done by now. Will post another video of that soon
@garfunkel2 жыл бұрын
Can’t wait to see it!
@corner.custom2 жыл бұрын
@@garfunkel hopefully before this end of the month 👍🏼
@Andrewlone174 Жыл бұрын
So you cut original exhaust to half and velded back? video not realy clear
@corner.custom Жыл бұрын
Actually I cut more than 60% off. But yes I weld back the original end cap to give a OEM+ look but then with way better sounds and flow
@faizalbi44952 жыл бұрын
i love love love the look. Unfortunately the sound will attract unnecessary attention to my bike(traffic police). Will buy if you can make one with a mellow sound ❤️from Singapore
@corner.custom2 жыл бұрын
The sounds isn't that loud. Please check recent build video of the K100 that's on my channel. You can hear it better in those soundclips