BMW Replacing Rocker Cover gasket N46 Engine 20i 120i 220i 318i 320i 520i Change Tappet 1 3 5 series

BMW Replacing Rocker Cover gasket N46 Engine 20i 120i 220i 318i 320i 520i Change Tappet 1 3 5 series.
I take you through step by step to pull the engine bay apart to get to the Rocker cover and to change the gasket.
Affiliate links for USA Amazon:
Rocker Cover Gasket: amzn.to/2AMLmIO
Rocker Cover Gasket & Accentric shaft motor: amzn.to/2OcDPX1
The Magnatec Oil I used and like. Not all Oils can be used in Diesel as well as Gas/Petrol cars. This can: amzn.to/2AY8uBp
This oil also is great with newer BMW's with stop start technology as it clings to parts longer.
Torx Screw driver set: amzn.to/31vNQTQ
Torx Sockets: amzn.to/31rXtmh **Great for every BMW owner**.
Stanley Basic Tool Kit 65 piece amzn.to/2SmxN6a
Stanley Basic Tool Kit 210 piece amzn.to/2QAukUf
Thanks for watching this Mark's reviews and Tutorials video. Mark is not a trained mechanic. Just a car guy that loves to drive and work on cars. What I do here may not work on your car and I am not intending to give professional advice for you to work on your car. But if you do know a bit about cars then hopefully watching these videos will help you to sort out what is going on with your car. Mark is not liable or responsible for any damage you do or things that happen to your car or yourself.
Cars are complex and dangerous things and not only can you be hurt working on them but you can also do serious and expensive damage to your car.
Cars should be worked on by qualified people, don't over reach.
Talk to a qualified mechanic if you are in any doubt.
Please subscribe for more videos.

[@DZTechNet]

From Algiers! I salute you as your "show how video" is very well explained!! Well done.

[@sarahjenah5859]

All that in just about 11 minutes. Impressive!

[@9feetfrog]

Thank you for making and sharing the how to video!

[@leki.e87]

Thanks for this 👍🏽

[@gtsdrag9854]

Thanks for this

[@ronaldinolanda9832]

Thanks very helpful 👍

[@thiagoraposo3595]

How mutch Torque you do on screws? Bmw 320i e90 N46N 2010

[@Jerry_from_analytics]

BMW 320i year 2006, European version (left hand side drive) does not seem to be that easy. That stiffening bar kinda gets in the way.. Together with cable harnesses (on top, in those hoses). I was not able to remove the cover ( 4:35 ). I also don't have enough tools to remove that bar as well...

[@tspark1071]

Very good. Can you explain how to remove the two screws at back side. Especially right hand side is not a normal screw. And no need to unscrew the flange of the eccentric valvetronic sensor next to the engine oil cap? Normally oil leaks near this flange.

[@Marksreviewsandtutorials]

It is about having a range of tools. I think I used a flexible shaft socket on the left rear and a small ring spammer on the right side.

[@LuqmaanShah]

Good video

[@Marksreviewsandtutorials]

Thanks

[@Driftkingmo]

I'm having issues with the small half moon which goes at the back by getting caught in the valve tronic pipe or tube, anyone got any tips or suggestions?

[@silviataylor92]

Hi, My bmw E83 crankcase vent valve went bad with pressure in engine & blow out my valve cover gasket. Do you think it could have damage any other seals?

[@Marksreviewsandtutorials]

I would be getting the head gasket checked. That sound serious

[@ismith1598]

very helpful this.. ! followed it and got the gasket replaced (and oil leak stopped) But started the car when finished (it all went back together without a problem reversing the disassembly procedure) and damn thing showed an engine fault on the dash, OBD reader said an error from the ex. cam sensor ... doh :( replaced the sensor and the car still reporting a fault. Its gone to BMW to sort

[@Marksreviewsandtutorials]

Glad to hear the first bit and sorry to hear the second. I wonder was a wire broken with the movement? Let us know what they found so we can all learn. MRT

[@ismith1598]

@@Marksreviewsandtutorials wow....! in answer. The BMW tech report says and i quote - Engine Valvetronic servomotor is not working because the power supply from the multi fuse box on top of the battery is faulty . Replace entire power distributor on top of the battery because a non replaceable fuse has blown Like I said... wow! And curiously, zero other electrical faults have shown up ;)

[@Marksreviewsandtutorials]

@@ismith1598 wow is right. I would take it to a BMW specialist that isn’t a dealer. MRT

[@ismith1598]

@@Marksreviewsandtutorials ...not one close by. Dealer is only 1km away

[@nigelpont4272]

Hey thanx for the excellent quality video I'm going to do mine next weekend I trust it will go 'all good ' if I take my time - QLD AUSTRALIA How much labour/$$ would a workshop charge??

[@baxdiyarcafazov6164]

👍

[@Cosminnegres-qx2uc]

N46b20?

[@WayToManyAssassins]

Will doing this throw a code?

[@Marksreviewsandtutorials]

No. If you put everything back correctly you’ll be fine MRT

[@WayToManyAssassins]

@@Marksreviewsandtutorials thanks