Bobcat Drive Motor Rebuild T590

[@davidjackson4112]

Hi Brady, thanks for your tips. Greatly appreciate showing us the proper method in rebuilding final drives including CR Components in saving money on parts.

[@chrislangdell117]

Wow great video. Tons of detail and proper professional instruction. Very impressed.

[@viktorponkratov3213]

hi Brady, thanks for video. Very helpful! Yesterday I finish exactly same job! The customer bring me motor and parts. that job not easy, but your video very help me thank you very much!

[@joseesparza9706]

The knowledge is unbelievable, thank you for sharing it with us.

[@ToddFathers]

Love the new shop and the increased vids, thank you for going the extra mile!!

[@mikescaffo4850]

Total professional right there

[@yelnats949799]

Awesome job! Happy to see it up and running and dry motors again!

[@tetradgroup]

Just a little more testing and it will be ready to go!

[@jeremiahrussell390]

Hey buddy I'm glad you're a bobcat tech awesome content good videos keep up the good work A1 man

[@therealboris2020]

Wow what a great video! Thank you 🙏

[@dylansadventures4696]

OF course you post the video a week after I did my t770. Hope I did it right lol

[@russsterns2656]

Well demonstrated!! TY Brady!!!

[@williamburke09]

Caterpillar has a installer tool for Duo cones. Looks like a piece of leather.

[@siamac6454]

Hi, thank you for all these useful and instructive videos. Here I got a Bobcat T595 with 2200 hrs on it , it is hard to steer, something getting extremely hard!! What could be the reason?

[@CRComponents]

Thanks for the shout out Brady! Great job on the video and process of assembly!

[@tetradgroup]

Thanks for providing the quality parts that allow us to repair these motors, you guys are AWESOME!

[@codymoore8014]

I have a 2018 t770 tailgate rear back fans one will work and the other won't then out of no where it will switch fans and the one will come on the other will go off. Fuses are good both fans do work just not the same time . Thank you

[@avalos2047]

Would of been nice if I had seen this video about a month ago. Had to replace that face seal and installed it wrong and it started leaking because it got pinched when I installed it.

[@raphaelgerhards4158]

Hi friend I have a question I bought a bob cat 751 and I would like to change the accessory belts the belt that goes from the alternator to the engine I managed to remove it but but the one that goes from the motor to the fan

[@bradgifford3122]

How different is this process for a T740? I have the same issue with the seals behind the sprockets and looking to get the seal kit from the place your recommended and do it

[@le999333]

Hi what tipe of gear oil do you using for drive motor for T66? Thanks

[@tannerkottwitz3883]

When installing the dual cone seal is the special seal installer tool the white circle thing not available for you to buy for the big and small motors for a customer or independent person. I always use it at work

[@tetradgroup]

I haven't seen one available for these smaller motors. We used them on the larger finals when I worked with CAT.

[@user-gd2fh5qs6mJD]

Hi I have t450 leaking hydraulic oil from behind the sprocket would that be from the face seal? All the hoses and everything else is dry

[@tetradgroup]

That's exactly what happened to this one.

[@user-gd2fh5qs6mJD]

Thanks for the reply Brady. you are a superstar!

[@douglastreeservice9602]

Good morning having an issue with a 2014 M series have the code d7542 before I started, then get a code d7518 then shuts down immediately watching some of your videos I think you've had the same issue. Is it the sensor or the bushings?

[@pedrovinent4454]

How much torque do you put on the last 9 hex bolt?

[@terraintactic]

How concerned should I be with a broken off sprocket bolt stuck in the drive motor? I've tried welding a nut, drilling it out, etc. it just will not come out while on the machine. Don't want to heat it up too much. How would you fix?

[@tetradgroup]

Should not be a problem, happens all the time.

[@scironworks]

Can you do an old m46 pump?

[@CharlieRubin-y5x]

Hey Brady maybe u can help me I have a 2019 t650 and it has a intermittent m4404 if u can help me out or where I can get wire diagrams that would be grt

[@tetradgroup]

Email me a picture of the tag on the auxiliary controller, more than likely the controller has failed due to an internal short that was common on the older version controller.

[@CharlieRubin-y5x]

Thank Replaced the controller and still having this issue does the machine need a relearn?

[@tetradgroup]

Did you replace the white auxiliary controller? What was the date code? They do need to be programmed but the code would be different.

[@firewoodsolutions]

I’m the first to like and comment

[@tetradgroup]

I would expect nothing less