Methanol K24 Mr2 On The Dyno - The Most Power We Have EVER Made!

[@Brandon_Gray]

Please get a fire suppression system on the car!!

[@masterexploder6802]

Good call. I agree.

[@MGAFFY]

At the very end of the video he mentions a full fire suppression system will be installed. And I agree, at this point it's 100% needed.

[@rileymannion5301]

Definatley needed, especially with invisible fire

[@MattyEngland]

Fire suppression is for girls. Real men just coat themselves in bacon fat and roll with it.

[@feelinghealingfrequences7179]

why not just get full coverage insurance?

[@vegaswould]

"What's a waste gate for? To waste power." - Wise Man From Video

[@rockkhound943]

Same " man " figured torque from rear gear ratio and trans gears 🤯

[@raimondnu3]

@@rockkhound943 I didn't even know that was possible! The More You Know!

[@d1specdrifter]

@@rockkhound943 its not hard to do when you have all the numbers

[@phiillzzz807]

​@rockkhound943 what? Can you translate that to beginner car guy lingo? Thx

[@raimondnu3]

@@phiillzzz807 Easiest way to understand is to go to Dyno!🤣

[@sirmonkey1985]

1500hp is cool, but that 900+ ft lbs of torque out of a 4 cylinder is nuts.

[@raimondnu3]

Good Ol K Series Back At Again!!! I didnt even realize that he was running the factory Honda Coils before M1 the ENTIRE TIME! That was MindBlowing

[@markchapman2585]

Ya, that's awesome torque

[@markchapman2585]

​@raimondnu3 Yeah that'scrazy. His last video Kyle said K series coils handel over 1500 horsepower no problem.

[@JBM802]

All they have to do is make a spark,

[@Bacongrease00]

@@JBM802imagine the cylinder pressure they have to fight

[@mythiccycles]

We need a "não exploda!" Fueltech and BoostedBoiz collaboration T-shirt! Way to listen and just send it, Kyle! Giving the fans what they want!

[@mickk3943]

"It felt great at 30psi, so let's just go to 75" 🤣 I reckon we need to see Whitt and Jackstand build a car together, just to see how long it stays together 🤣

[@OG_MTK]

.005 seconds

[@hackaboom]

Honestly the motor would probably live longer than the chassis with jackstand.

[@teammusketeers]

​​@OG_MTK that long ? I like the optimism 😂😂😂.... it wouldn't live until the assembly is complete 😅😅😅

[@mastercricket7626]

Whatever it is would be nasty quick and best believe it will have NOS with jackstand 😅 and White's knowlage .. tbh I think it would make a few passes that might even set some pb's for them 😅.. peace and love, brotha, keep it rad, stay safe, and build on.. l8z

[@FuelTechUSA]

It's always a good time when you guys come to the Dyno! 😎

[@unclesam239]

I love how Luis was like “if it was me, I would be running 85 pounds” 60 secs later: “I’m gonna watch from here”😂😂

[@ElectronicMax88]

Anderson said, youre not that guy yet..... YET! Theres a fucking chance boys!!!

[@G_Ozare]

😂

[@wolfparty4234]

I caught that… funny as hell!! Let’s goo!!

[@theglitch99]

Who is that guy,,,NOW????

[@astrodudepsu]

George pulls a 330ft wheelie in fiero, Kyle: hold my beer.

[@michaelfagan6123]

Doesn't the MR2 have the sensors to help stop the wheelies?

[@joshuahi7053]

@@michaelfagan6123 yea there is laser height sensors in the front

[@djpickle68]

Maga george.... ew

[@StrKillin]

​@@joshuahi7053Last I knew they turned it off because they tuned the wheelie out of it between the slipper and the tune but I'm sure they will turn it back on til they get it consistent again

[@sunfigt]

Loooool😂😂😂

[@Slim728]

That Anderson dude is a giant of positively. Seems like the most genuinely nice guy and hearing about his business being basically destroyed at the end but yet he’s still all smiles was pretty amazing

[@cassianomartin2699]

I live near were it happened, flooding was really bad. It hit many cities around. We're still recovering from it. -- " Gaúcho do chão farroupilha, não podemos se entregar de jeito nenhum!"

[@randomguyontheinterweb]

The Fueltech guys are the coolest guys in the industry

[@SloppyMechanics]

Kyle built a monster good job, no drywall holes today

[@bigswingin6316]

🤣

[@MrPlatinum831]

lmao

[@rgreerjr]

It always weird seeing sloppy commenting on other peoples videos

[@wobblysauce]

There is still time.

[@N3MAID3S]

It always brings a smile to my face seeing you comment here, i can safely say if it wasn't for you i wouldn't be here either. For some reason i remember my first ever video i watched around modified cars and it was your video of putting nitrous on taurus beater and ripping it on grass 🫡

[@BillStraub303]

Ive seen some really big names come to dyno at Fueltech and not get anywhere near the VIP treatment that the BoostedBoiz get. Your really killing it guys, keep up the awesome work!!!!

[@dereksmith2828]

I take it they have tons a respect for what Kyle has accomplished and know he’s one of them at heart. This is Huge for BoostedBoiz to get this type of content with them

[@billfelldin912]

1200++ newton meters in a 4banger is insane 👌 congrats to the new numbers

[@brunomanzi185]

As a Brazilian guy that watches your channel for years now, it’s satisfying to hear you say some Portuguese lines 😂😂 loved it

[@jjkgiglio]

Vamooooo

[@Bu5H84]

YES!!!!!!! Kyle speaking Portuguese, let's go BOIZ!!!!!! big love from Portugal 🇵🇹

[@ThalisUmobi]

Wow boyz, you're so lucky to meet Cacá Daud there! The guy really knows his stuff.

[@Hard_Right]

cucka dude ?

[@nickwalston1322]

Wished I knew just a little bit of what these guys know and can do

[@tetracontrol]

That guy is royalty in the 4 cylinder world

[@HeidiFegles]

Fuel tech Definately made tuning real practical didn’t they. So awesome.

[@fourleafcloveer5011]

I got a fueltech because of this channel. 100% I didn't use a code but I know i wouldn't have it if I didn't learn about it through Kyle and Brent. I got a pfi turbo.

[@Greg1096]

Fueltech is awesome, their customer support is some of the best I've come across in the racing aftermarket, they came in clutch for me last year with the remote tuning/troubleshooting when i started having issues on qualifying day, wouldn't have been able to race that event without their help, hell i even won my class. 😂

[@davemcbeard]

Buckle up boys, this things gonna fly!

[@skate2freak898]

Hopefully, not fly apart lol

[@imalec]

@@skate2freak898those doors are definitely exiting

[@ricko6514]

Love the relationship between boostedboiz and FT. You just dont see that very often, it's like they are part of a family. Loved the vid!

[@butwhytharum]

Look at Kyle learning the engineering behind hot rodding from hot rodding engineers.

[@JimmytheCow2000]

I love that you kept asking to keep the FT700, and he finally says. "Your not that guy yet." Love it! Keep growing boiz! You'll be "that guy that gets early release" stuff

[@korzer]

@@JimmytheCow2000 maybe dropping the Tesla's would help

[@johnbourdeau9]

​@@korzeryou mean getting rid of them or no content like that?

[@ConanOG]

The only people that have it for now are the developers from Fueltech and another company that is building the 2025 Brazilian Stock Car vehicle (which will use the FT700), no final consumers have it, the first batch for consumers is yet to be sent.

[@PushingDownDaisys]

Those guys at FuelTech are pure class as always. Testing the limits and having some fun along the way. I also noticed they had a "Boosted Boiz" display up on the TV, the small things are even buttoned up. Cheers guys, nice video.

[@GearHead1258]

The Fuel Tech guys are so freaking cool. It’s awesome to see their company flourish in the land of the free 🇺🇸. They have built a name in Motorsports that’s undeniably respected by many. They seem to be great people, they let the camera into their lives and share their personal relationships with their customers, which is just awesome. Congrats Kyle on your build making awesome power. Louis’s jet ski is insanely cool! What a great video, thank you @BoostedBoiz for sharing. It’s truly inspiring to see how far your channel has come. I remember watching you drifting Wago in the snowy parking lots of Colorado, and I’m still watching! 🤘🏼

[@802Garage]

What a rad crew of guys at FuelTech is! I didn't know about the flood that's so awful. Hope everything goes smoothly from here. For them and the MR2 of course!

[@lyricbread]

Those FuelTech guys are a riot. They seem like a cool bunch of dudes.

[@just_j6514]

The Guys At FuelTech Are Awesome. (Try Not To Forget The Condensation With Running Meth And Keep Up On The Maintenence)..

[@neong]

I love the Fuel Tech trips. These guys know so much and seem to love sharing.

[@otfjuju6]

Boosted Boiz needs to be a certified Fueltech Dealer one day🔥

[@r7kelley553]

I see I'm not the only one that likes the video before I even watch it.

[@justinwinter4018]

Standard practice. Lol

[@leonardwashington6456]

It's always an automatic like for these boys from me

[@lerrynhawke3375]

Standard

[@robtheARguy]

Kyle- "let me just take it home" Anderson- "your not that guy pal" 😂😂

[@brandondimmitt8467]

The fuel tech guys are beast! They’re changing the racing game!

[@B.E.Z.nOtLayZ]

The guy in green was a Great personality!

[@shiffer253]

man that ft700 demo was so impressive.

[@MrDroste]

Fuel tech guys seem like such cool people. If I ever needed to go standalone it would for sure be a FT

[@djk91lx28]

Seen people hating on fuel tech and I still don’t understand why,,,, all great guys. Love seeing videos from all kinds of racers , always something to be learned by these guys. Go fuel tech!!

[@fabini14]

Dont have the money to switch that is why... fueltech is taking the aftermarket ecu market

[@mastercricket7626]

Yeah, tbh I really think it's just a price thing .They are not cheap , but they are arguably the best in the market atm

[@djk91lx28]

@@mastercricket7626 makes sense but at that point most aftermarket ECU 's are expensive aside from Holly. Cletus still running a holly in mullet too. The new fuel tech has more inputs. That's been a big complaint too compared to Holly

[@fabini14]

@@djk91lx28 Fueltech have input expander but yes, the new one will have a lot more inputs.

[@djk91lx28]

@@fabini14 yup, people want a 100 inputs nowadays lol

[@therealpaddy4687]

Guys fueltech are the bee's knees Anderson your a gentleman

[@SRM_NZ]

I know dick about cars...but your channel is one of my favourite...I am learning so much about the mechanics of cars...which makes me feel good...

[@DeejayPozE]

It's so fun to learn huh. It's crazy how it all works!

[@cfwheezy]

The attention to detail with how different fuels will run with different air temps is amazing. Perfect explanation. Much love from AZ

[@DLUSK91]

The MR2 needs a huge Fueltech windshield banner. These guys are awesome.

[@jra5624]

I didn't know that about FT HQ. These guys really have always been good to you guys. And the knowledge shared when you're working with them can be priceless.

[@mike30534]

Damn it! First Cleetus at Pro-Line, now y'all at FuelTech. I can practically see both places from my house, but not Russia... Every time I drive through Ball Ground I glance at the cars in the parking lots looking for something familiar. So far nope, but one of these days.... Great to have y'all in Georgia!

[@CarsAndChicks]

Day 6 bring back the Honda prelude to Florida

[@MartinSanchez-sk6zo]

Keep goin man

[@RadDadisRad]

Holy 💩 that FT700 has so much!!! *I WANT ONE!!!*

[@Labergemusic]

The most insane detail in this entire video is that guy PUT A 10L90 INTO HIS 2J SUPRA WTF THAT IS AMAZING AND WAY TOO COOL

[@boostedalex5994]

And it’s the fuel tech controlling the transmission

[@breakupgoogle]

yeah for most thats its own video lol. just casual uber swap in a rhd lol

[@johnnygeorgopoulos4072]

Yeah it's definitely 500X cooler than any damn TH400 I can tell you that....at least it sounds good driving... and...is fast AF 😅

[@Labergemusic]

@@johnnygeorgopoulos4072 I thought I was special with a 6L90 in my LS swap but dude just went ultra max with that 10 speed

[@MathewSkaggs-fx1wq]

It’s a billet block as well 😮

[@4113N5]

FuelTech is such a great company with the support they provide to the community. But more importantly is that they become such good friends. I smiled throughout this entire video.

[@jclaybaugh2]

Loved hearing from the Fueltech brain trust about M1. That was awesome

[@thefightingplumber]

Oh YES!!! A 50 min video? You made my day

[@GregoryJohnston77]

Fueltech is some stand-up guys. Their equipment is way out of my league but I'd sure love to support them.

[@vinicios307ify]

Nice ! It's always good to see the Fueltech team and the boostedboiz together. I am proud to be Brazilian on these moments

[@joshmross-bailey2855]

The Fuel Tech guys are awesome! It must be a blast to work there.

[@Brtmyster]

One of your best episodes ever.

[@blackomegawolf1490]

Hearing these guys talk concept and talk the science is so badass. Love this video 10 minutes in

[@briskettaco]

These Fueltech guys are freaking hilarious!

[@georgem.6136]

Fuel Tech dyno sessions are always so awesome!

[@vitorlovatto7121]

Man, i'm from Brazil and thank you for the shout out on the flood that happened here. Very nice video and keep it real, you guys are awesome.

[@BenjySparky]

Kyle, Wyatt, and FuelTech, y'all rock! Peace

[@rockkhound943]

Fuel Tech guys are gods . Crazy amount of knowledge.

[@BlueEternities]

That car gives me crazy smiles watching these dyno runs. Love the new sound.

[@tommc282]

That FT 700 is sick!!!!

[@theangrymarmot8336]

Always love to see the FuelTech guys in the videos. It always amazes me how far ECUs have come, and the FuelTech stuff is crazy. I remember when I bought a Electromotive Tec3R and thought I was supercomputin' - but nowdays it is on a whole 'nother level

[@br549rdr]

You have to love the guys at Fueltech. Their accent and always smiling. So damn smart too!!!!

[@bmarklar]

The knowledge at fueltech is crazy

[@ChutneyInc.]

the record holder was dropping some gems

[@swazzy8469]

The trick to not tearing up when methanol is in the air, is to not form an emotional bond with it.

[@gullreefclub]

If you huff enough Nitro fumes Methanol fumes become nothing but sweet roses 🤣

[@PURPONTHETRACK]

The "you're not that guy yet" was so genuine and playfully funny. Also that thing is a gamers tech guys wet dream ment for car guy stuff, so amazing!

[@beyondmaintenance]

😂 “you’re not that guy” with the shoulder pat.

[@coliimusic]

Loved the Fueltech dudes, amazing humor all around, had me smiling and learning new stuff about methanol tuning

[@billwilliams2242]

Really enjoyed the video and the FuelTech guys are true motor heads

[@RedmistAU]

It's all about air density, the cooler and denser the air entering the throttle body the more power you can make.

[@fomomofo6917]

No shit

[@boosted2.4_sky]

No POOP

[@djpickle68]

Compound turbos, compound intercooler, with an equal length intake tri y. Is the answer to 2000hp.

[@MattyEngland]

No faeces

[@kiwi84ryan]

No excrement

[@fe.salves]

I follow BoostedBoiz since the early days and never would've imagined i'd see them trying to speak portuguese lol

[@atomicsquirt8082]

When him and Charlie were racing randoms on the interstate. Kyle has come a long way

[@sarahdell4042]

That’s serious power! I remember 15+ years ago building 4 cylinder turbo stuff, and seeing 600-700 hp was SERIOUS

[@Muldoon111]

I’ve been SOOO looking forward to seeing this.

[@misawajason]

Thanks for posting the longer format on this one. I enjoyed listening to Carlos, Andersen and yourself talk about stuff for a while.

[@iancameron415]

Super educational video, pumped to see the MR2 get back to the track.

[@RadDadisRad]

I love the FuelTech guys. Been following them for a while.

[@lucrebec727]

Suppression is a must now! Hope that Lazer height sensor is working! Can't wait to see her rip. Awesome job boiz!

[@boomgarf5459]

Now that's a certified boosted boiz motor if I ever seen one!

[@davidvander2233]

Air density is more relevant than boost pressure, intercoolers add density. You will make more power with less boost pressure with more air density

[@djpickle68]

Twin compound turbo's, twin intercoolers, with tri y intake.... 2k hp

[@mr.k6136]

Even compounds are still susceptible to atmospheric pressure​@@djpickle68

[@Negative1337]

Twin compound turbo? four turbos?​@@djpickle68

[@Hard_Right]

@@djpickle68you're dumb in every thread huh

[@SirJeffreyAllen]

No it doesn’t.

[@BrianHollihan]

What a bunch of awesome people at Fueltech 🤙🏽 can't get much better than them, especially Anderson, always has a smile on his face 🤙🏽😉

[@alastairdow4400]

Fueltech real racers making products that work for a very competitive price more of these types of businesses needed in the performance auto world.

[@HeidiFegles]

Thank you Kyle for doing what everyone came here to see which was send it. Kyle true to his roots. Been watching for over 12 years.

[@davidlyall4769]

At 15:57 he made so much sense to me. So basically Kyle time for a different intake manifold, centrally fed may make all the difference. This way, all cylinders run equal temps vs cyl 1 potentially causing a complete engine failure. Ps PFI speed has helped me more with fuel tech then anyone.

[@leostrop979]

You just meet one of the nicest person in the world, that just happens to be a drag race legend. Cacá is the man!

[@rdeleon4190]

0:04 in and I already hit the like. I'll you know how much I love this after I'm done.

[@rdeleon4190]

Ok. I was super excited throughout the video. But I literally got hard, stood up and fuckin yelled when I saw the Supra. You guys are killing it.

[@douglasmolineropereira7396]

You guys should came to Brazil! I'm 100% sure you will love our car and what we can do on the track

[@curdisdunn5414]

About time real race car content

[@printhubbrasil]

Im so proud seeing boostedboys and my people from Brasil in the same video! 🇧🇷🇧🇷🇧🇷🇧🇷 AND THE OPALA in the background Hell yeah

[@jadenriley]

27:03 casually wearing the front clip of a car

[@bluegizmo1983]

Somebody back there pretending to be a racecar 😂

[@xSHOOTERTOOTERx]

I paused just to comment on this... 😂🤣😂🤣

[@CarlTedrick]

i enjoyed the tec part of this the most..you guys rock.

[@garywoodward847]

Kyle brother I am impressed that thing is stout. In not really an import guy but I like that thing. It sounds freaking sick! You have a great channel.

[@AbbStar1989]

Congratulations Kyle and Wyatt on your success. Don't be scared to work hard and chase your dreams people. Good fortune may just find you!

[@meziked]

A safe 1300hp with reserves, MR2. This is gonna be good. The fueltech guys seem cool. "You are not that guy, yet".. haha instantly liked him after that.

[@w0nderb0b]

the intercooler talk is really nice to hear. You'll always reduce boost pressure at the throttlebody by lowering IAT, the density increases as temp drops. Even though the pressure at the throttle body is lower the same boost pressure was made at the turbine housing, reducing IAT is always beneficial, meth or no meth.

[@riderzinc]

Mr2 needs a Boostedboiz wrap with a turbo on the side

[@42Hertzer]

Imagine bringing a engine engineer from the 70:s seeing this in the future, almost 1500hp from a 4 cylinder engine! Bet they would say it's a hoax! :)

[@darionanderson5943]

HOLY SHIT KYLE,,,38:34 why you look like Sharkboy off of,, Well iykyk,,, he's just missing his lavaGirl💀🤣🤣🤣

[@ianf2985]

Awesome to see the teaching aspect as well. Such a great partnership!

[@maxxrelax88]

Fire suppression system is a must now my guy, gotta stay safe and methanol fire is no joke!