Hotpoint overheated door interlock | washing machine | how it failed!

[@mrlaundry101]

Fire recall model, techincally if you notify hotpoint they should take this away and give u a brand new replacement

[@bye122]

Exactly

[@abed051980]

You are right don't buy a Hotpoint or Indesit Washing machine they are rubbish and they burn people's homes down.

[@RandomStuffByNoah]

In December 2019, Hotpoint and Indesit washers were recalled and this was one of the models

[@mielekid.w1613]

U can have 2 options. 1. Take it pff your other destroyed hotpoint and have a working one 2. Call hotpoint because it caught fire as ots an affected model and they give u a replacement

[@Hisense_lad]

I'd say its worth putting a door lock innit

[@Duckybrownys]

I have the exact same one, and it is.

[@benthebossjackson4388]

These machines - had some models with dangerous burning door locks and machines going on fire and exploding... models were disconnected and discontinued. and under law scrapped unless hotpoint replaced the door locks.. but eventually they were stopped due to safety reasons and replaced by hotpoint...

[@richardbutler4488]

Wonder if Hotpoint would give a new machine for it still now, or maybe this machine was abandoned because of an exchange. Maybe it wasn’t worth the tinkering around with it. Although it’s obvious to see that the interlock design was an design flaw, and it would be easy to ignite if the right combination of circumstances came together.

[@richardbutler4488]

@@MarcLeslie98fm Took the owners a long time to notice the issue. One would wonder how many machines still exist under recall but not repaired/replaced. Will be interesting if Owen manages to bodge a repair which is safe and effective using alternative parts/spares.

[@zaczerlany-band]

no idea, but those colours are for something so why you connect 2 browns? red is a live one and 2 brown ones are neutral? and all might have to be connected as the board needs to know that the electromagnet is switched on

[@LaundryGuy1500]

Terrible machines, fire recalled. As someone else said Hotpoint may give you a brand new replacement if you tell them about it

[@abed051980]

You are right

[@TheInfoworks]

Owen, I'm thinking that the board needs to know something so the extra wire has to send a signal. maybe you can trace the circuit in the door lock switch, cheers

[@bootsowen]

I think this one went to the big laundry in the sky months ago. Found the footage in a mystery file last week.

[@TheInfoworks]

@@bootsowen Ah, a familiar storey, open the kiln this afternoon, 48 Hr cooling is good, cheers

[@Boschwhirlpoollad1996]

I would say it’s worth cleaning up and putting a new door lock in and selling it or giving it away

[@danhutchinsonbackup]

@@MarcLeslie98fmprobs can be modified to not be a fire hazard

[@balfie18]

Only thing u can do with this my friend is smash it up. If its been registered and thrown out then it's no use. The door wiring is linked to the drain pump wiring, so first thing that generally happens is the door locks, drain pump starts, and then fills. There are parts available for the repair of these, but unfortunately I can't go into that here. Would help ya if I could. Only again I can give ya is smash it.

[@bootsowen]

This one was from a few months ago. Found the footage in a clearout last week. About 30 vids. I have no memory of what I did with this. It may have been an inverter motor (you’d remember better than I). I think it may have gone straight out again to the big laundry in the sky.

[@balfie18]

@@bootsowen yeah they had an older style inverter motor, they have changed them for newer style inverter motors, absolutely almost silent when on, not a lot of them machines still exist, they have either been replaced or repaired so won't find many of them out there now days, can still find some, but at the time there was huge media campaigns and calls and emails to people with affected models, so most have been sorted, I've been with the company a good while now and can count on one hand the amount I've seen, and I've seen thousands of machines. 😂

[@amani5614]

I need help i hve a black version of this and its locked and wont open how can i open it

[@zx8401ztv]

But you are the master of washing machines, i believe in your abilitys 😀 Its odd that the door switch connector burnt up, i would follow the brown wires and see where they go, a hidden fault maybe. Check the motor, to see if its dead.

[@washboss9119]

New loom and lock i see no ends of these bloody things but normally i find the handle also broken because of the door locks burning out

[@Horlis201]

That’s the same hotpoint model washer I’ve got at home

[@Jake-gy9fq]

Massive problem with this model catching fire with the interlock. The only problem is I have one sat in my kitchen and I can’t afford to replace

[@danhutchinsonbackup]

Replace to door lock with a black one. Do not use the whit door lock as they are the faulty door lock as I have heard

[@Lenardd]

Not even surprised…. Indeshit/Hotpoint behavior 😂

[@danhutchinsonbackup]

This is a recalled model. The ones with the black door locks should be safe

[@abed051980]

​@@danhutchinsonbackupExactly

[@abed051980]

Be careful when buying a Hotpoint or Indesit Washing machine as this model is on the recalled list

[@mghjfdgh]

I think the back water filter is clogged

[@charliecharliecharliecharl8554]

The problem with our washer was we couldn't open the door even when it had finished washing , how to know if interlock is broken mine has electric going through it but doesn't click

[@charliecharliecharliecharl8554]

After taking interlock apart decided to buy replacement because I don't want to electrocute myself

[@benthebossjackson4388]

Sadly dont fix it. u cant sell it knowing its a recall, the replacing door lock wont fix it as it trips the PCB knowing its changed etc... PCB would need reprogramming

[@Maxwasinthe212]

it turned into a hotpoint Aquarius the one with the over heating door lock

[@KarlHamilton]

They were recalled.

[@mikigry9838]

Pressure sensor may be stuck

[@Duckybrownys]

I have this machine Edit: I dont have it any more it caught fire

[@mrbeastfancalls]

Made in August 2013

[@Motherboard686]

June 2016*

[@WishyWashyGuy]

I had this in black was a piece of shit