Born for the Stage? Valeton GP-200 Guitar Multi-Effects Modeler Real World Gig Use!

[@OfficialPerfectoDeCastro]

Get my Valeton GP-200 Patches here 👉🏼 bit.ly/PDC-GP200

[@alphadogstudio]

Is the live sound, in the video, going into an amp or was that directly into the board? I'm thinking of getting one of these and would really like to know. Thanks!

[@midifalcon4965]

Hi..I bought the GP200 and imported your patches (Thank you) but when I click on the 1st patch, the stomp mode doesn't have the pedals assigned? Can you help with a 1,2,3 step after loading the patches.

[@h4mp3l]

Thank you very much, highly appreciated :)

[@mush182]

Absolutely love this video.

[@artistlovepeace]

You all sound wonderful! Keep sharing the dream!

[@SujeetGT]

A quick tip for everyone using the GP 200. Presently the unit doesn’t have stereo width to the effects, I suggest using the M chorus modulation effect pre or post amp with a 20% mix and 20% depth, this gives much wider space for the tone especially for the heavy crunch rhythm and even for lead if you wish so.

[@OfficialPerfectoDeCastro]

Nice tip!

[@isatriya2]

Most people use ping pong delay and set the feedback time as low as possible to achieve such thing like stereo FX..

[@accentontheoff]

I am new to this so I apologise if I misunderstood. Are you saying that none of the effects are in stereo?

[@SujeetGT]

@@accentontheoff probably they're slightly but it's not that wide enough like other units

[@accentontheoff]

@@SujeetGT Ah ok I guess they don’t feel like stereo even if they are. Even the ping pong delay?

[@tyronwatzinger3784]

Just found your channel because of the Valeton GP. Your channel and your band are awesome ! Incredible how clean and accurate you perform live on stage! Also Thumbs up for your lead singer !

[@elementscity4204]

THANK YOU for this video, I loved that you not only explained how good it is but also gave some comments on how it can be improved by firmware updates. I really hope valeton listens to you, and please update us in a video if they do so. This is the first video of yours I ever watched but I'm definitely watching more

[@TheKLeifheit13]

This is the most practical review/guide I've found on a modeler, thank you! My only gripe about your video is how loud your shred lick interlude is in comparison to the rest of the video, I'm officially awake now 😅

[@georgehaywood8608]

Great Video!! I love how you have your GP200 setup. I would love to see you do a video that actually goes through the process of programming the footswitches and how you assign them to the different effects. The manual doesn't really go to much detail about setting the footswitches. Also most of the other videos just want to show you how it sounds with very little explanation on they achieved the results. Any way it would be great if someone who actually uses the GP200 to perform with did a real hands on in depth tutorial! Thanks Again for a Great Video of the GP200!

[@JTB--]

The taller switches on top, smaller on bottom row is a savvy design . That's real attention to detail. Excellent Demo 👍

[@julzmuzik9464]

I've never owned or tried any effects pedal. Can't afford one. Must have been great. Thanks for this preview master perf

[@rodneyguinn1887]

This is the best modeler demo I’ve ever seen. Amazing job .. i really appreciate it and i bought this unit and downloaded your patches. You should consider making more patches and charging . I love the patches and your approach as a live musician it really helps

[@hmcpimpslap480]

Nice plane and your singer was killing it!

[@marsk09]

You can definitely hear it out there pushing through the mix 👏🏼👏🏼👏🏼

[@RichKDollarElement]

That lead singer is rad!! 💥💥

[@tomaszlatos1363]

Absolutely, if I didn't see it, I would think it was Josh Kiszka or Bon Scott or Axl Rose. Great event band

[@Timbo1969]

Best review of the GP 200 I’ve seen yet

[@clouds5]

For me it's the perfect unit. Size, price, functions, quality. It's all there. One thing that is missing: Global Tempo. You can only set bpm per patch so if you switch you have to tap or manually set tempo... We need an option that lets us set global tempo that applies to every patch.

[@pedro.darochafernandes]

Can you please explain how you set the footswitch to be engaged on tap or in release?

[@ThePro-q7h]

Now, your wishlist is already there with the version 1.5. I sold my mg 30 for this valeton gp 200 and I love it

[@alexxdb]

No regrets on ditching the mg 30, then?

[@tonyharley5230]

I'm the guitarist in a tribute band (UB40) and play a Zoom G3 direct to PA. I've tried every brand of MultiFX and keep coming back to Zoom. I am considering the Valeton but have been concerned about reviews stating the modulations are weak? Although I use fairly subtle settings I rely on one good phaser effect. I note that the GP200s main competitor the Pod Go doesn't have balanced XLR output, that's a prerequisite for serious stage use imo. I'm glad to see a JC120 (staple reggae amp) is simulated in this unit too.

[@lalnuntluangachhakchhuak5767]

Hello my fellow zoom user

[@rmcf3972]

4:05 please share the patch for slash tone. Tnx.

[@danielmiller2886]

Perfecto, I love the old lady rockin out in the front on the first song!

[@sburt251]

Thanks for the video man! And your band rocks! You guys sound tight! Could you explain a little more about the "activation on initial tap or release" at 4:45? I recently bought the pedal and would like the effects to activate when the switch is pressed down, not on the release. I can't seem to find anywhere to toggle that function. Thanks, and keep rockin! 🤟

[@knutgit]

A real Situation Test and pickin up Infos and experience from Lifegigs is a 100 times better than just talking in the Studio. Great Leadsinger! Thank you for NOT showing 100ts of Effects nobody uses on stage.

[@unicaaiminakuchi3889]

We need an updated review of this. they just released a new firmware update and you can use 8 control functions and some other features like whammy and auto swell.

[@davedavenport8673]

It would be nice if you could name the footswitches on the screen instead of CTRL 1, CTRL 2, etc. I know that doesn't really help at a gig as the screen is hard to see, but for practice and setup would be nice to know what effects you are activating on any of the switches.

[@AndyY499]

can you program the footpedal to a pitch shifter, for those high dissonant type clash notes?

[@velochromecktan6075]

PERFECTO!!!!! Thank you very much. It's actually very fun watching.

[@mikegill738]

Can you set the wah to switchless?

[@jesterraj]

Can I get the presets of the patches you used for the show....thanks Caribbean viewer

[@BenRandall]

Very much new to this world of guitar pedals, so could this be used directly into the pa, no amps, no cabs, completely ampless?

[@OfficialPerfectoDeCastro]

Aha, you didn't watch the video 😂 That's how I used it for the live clips, XLR output direct to the PA mixer

[@montagninavarro]

Boss Perf! May request sana na topic, volume levelling! Volume level ng clean >> crunch >> solo .. thanks and God bless!

[@paulelopreofficial5560]

Yeah

[@BaldwinRojas06]

Na pa bili na ko kuya perf dahil sayo hahaha. Salamat ang ganda din ng patch na ginawa mo. Thank you po💯👌🎸❤️

[@VictorEMusique]

I just got the GP200 yesterday and I want to use it with my BluGuitar Amp1 which can take midi commands pretty easily - it has a midi read mode that whatever command comes next, it remembers the settings on the amp - how would I send a midi command with each patch? I set it up so that the top row has 4 different patches and the bottom row has different effects from the chosen patch - what I am hoping is that as I change patches on the top row, I can send a midi command to the amp to recall different channels (the amp has 4 channels) - and thank for the patches!!!

[@OfficialPerfectoDeCastro]

You'll probly need to assign the corresponding MIDI CC commands for the Amp1 to each of the GP200 switches. Can't say if it'll work or not but that's a cool idea if it does. Maybe a deepdive with the desktop editor is in order.

[@josegallegosdds]

Great video. One of the best and informative reviews I’ve seen in a long time. Your band sounds 👍🏼 Great‼️

[@clydeclavo7868]

Does the delay have a subdivision parameter?

[@jesterraj]

How is holding up after a year now?

[@santoshbaskey]

Could u make tutorial for assigning footswitch I am really confused. And please help regarding stomp and I really dont understand.

[@MandirigmADxb]

Mabuhay ang Musikerong PINOY.. MORE POWER DOL PERF... CHEERS FROM DUBAI UAE 🤘🇦🇪🤘

[@gitaristangengot3772]

Which is better the flamma 200 or valenton gp 200?

[@rogiemac]

Nice chops bro. You and your band sounded great! In comparison, Im a total amateur. Interested in one of these multi fx. The GP-200 is way more advanced than I could take full advantage of....and the price is pretty good.

[@jurepecnik9054]

How is pitch shifting working in this unit? I would be using virtual capo for my needs... Could you make a video about that? 😁😁😁

[@guzmandelgado5721]

Where is the option to set the footswitchs to run on the press or on the release? 4:48

[@torsten1091]

Hi! Did you find out? I have been looking for this since I bought the GP-200

[@workdays8280]

Can it put 2 different AMP simulations together like a preamp and distortion and boost

[@OfficialPerfectoDeCastro]

Just one amp, no parallel processing

[@A-Wa]

But how is it for practicing with the band? Can you change the tone of your presets directly or do you need a computer for that?

[@OfficialPerfectoDeCastro]

You can tweak on the unit but desktop app is easier

[@gazzaduce3424]

I have just ordered the Valeton GP200. Quick question how does this Valeton know when you are using effects in the FX loop and not out front ?.Thanks

[@Aaron-xm9qk]

Can you record multiple loops and stomp/select between them? In essence have a chorus, verse and bridge loop and navigate between them for live show? Also, can you send drums to one output (ie mixer, PA, different amp) and guitar to a different output (ie different amp, etc)?

[@jamesrotenberry4989]

Hello….I ordered the go200x should be here within the week….i watched a different video where a guy assigned the bank up/down (maybe patch up/down) to an external two button clicker switch…would that change the set up on your download patches or how would you assign it accordingly to the set back you mentioned in this particular video…I do understand that this video is a couple of years old but I do plan to download your patches as I find them super diverse and believe you could pull off almost anything from classic to heavy music tones

[@OfficialPerfectoDeCastro]

The fs assignments should be the same thi they are pretty easy to set up. Enjoy!

[@davidoelker493]

I realize this video is over a year old, but I just recently got my GP-200. Could you explain how to assign the expression pedal to the preamp overdrive and distortion effects? I looked through the manual and went through my unit but couldn’t figure it out. Can you do this on the unit or does it have to be done through the software? Thank you for putting together this very useful video!

[@OfficialPerfectoDeCastro]

I’m using it as a volume pedal placed before the amp block. Set minimum volume to where it starts cleaning up then 100% volume on toe down

[@hifans11]

Quick question, by any chance have you tried switching between the 2 presets while in the middle of the song? Just trying ti check on whether there will be a cut in the signal when switching between presets. Thanks! By the you sound great! Well noon pa naman!

[@gorimus]

Nice demo and tones. This is unique video in a live context, great idea! I've heard that it has a noticeable lag when switching patches, is it true? Any views on how this compares with Zoom G6; can't decide between the two! Thanks.

[@OfficialPerfectoDeCastro]

Haven’t played the Zoom G6. Lag is typical multifx, which is why I try to get the most range out of a patch so I rarely switch presets within a song

[@gorimus]

@@OfficialPerfectoDeCastro Thanks for your quick and honest opinion. I get your point. In that case, when in pedal board mode (within in one preset/patch), when we on/off individual pedal effects, there wouldn't be any is lag, correct?

[@SujeetGT]

@@gorimus yes, even otherwise when switching patches ,the lag is very negligible especially when you have delay and reverb trails on .

[@gorimus]

@@SujeetGT Thanks for sharing your views. Currently, I can't decide between this and Zoom G6, but should be able to pull the trigger soon. Such discussions are helpful.

[@OfficialPerfectoDeCastro]

@@gorimus if there's any lag, it's barely there. Didn't bother me during the gigs

[@jaywhite3186]

Thank you for this video. It was helpful for me. I do have a GP 200 and really like it.

[@OfficialPerfectoDeCastro]

Glad it was helpful!

[@Osssssssssssssh]

Nice video I was planning to buy a Boss GX-100 after I saw this GP-200 the distortion are awesome and the Wah is cool thanks bro

[@DavidChiriboga]

Just discovered your channel and artistry! Great playing and dig the sound of your live band. 🔥 You guys kill it! Thanks for this review. I'm a Spanish guitarist, trying to up my electric guitar game and figuring out this whole tone thing lol. Do you still currently recommend this unit for someone like me, getting my first multi-effects unit for live performances? Or do you have other recommendations for me to look at as well? This is very overwhelming finding a unit.

[@OfficialPerfectoDeCastro]

This is still great unit to start with 🙂

[@rmcf3972]

​@@OfficialPerfectoDeCastrothis or wait for valeton gp300, if there is?

[@javiacustico]

people were on fire in the dancing floor XD

[@francoislombardo5403]

hello can you explain me how to charge patches on the valeton gp 200 please ? thank you very much

[@paulzeofficial]

Idol. patulong naman pano ma trim ang sound ng GP200 masyadong matalim eh. 🙏🏻

[@brokenchains]

Can you set banks ABCD as 4 presets live, for instance clean delay on A, Clean on B, dirty on C and lead on D?? If you can is there a lag from going to A to D? Thanks

[@OfficialPerfectoDeCastro]

Yeah that’s that factory setting out of the box. Lag is typical of multifx, not noticeable but you still have to time it right.

[@MrSpeed-lt8gr]

Love your Got Balut t shirt!!! My family never made that for me to eat. I've eaten tripe, I've eaten dinaguan (and enjoy it) but I ain't eating balut no matter how much you pay me!

[@OfficialPerfectoDeCastro]

Hahaha it’s just a hard boiled egg…. with a beak 😂

[@manfredworner8528]

Great vocals 👍

[@marklienert2646]

Thank you, great video! I learned three things about programming patches!

[@richardchristensen1768]

Hi Mr Perfecto Thanks for doing this amazing video I'm very excited because I just got this unit and now have a decent grasp on using it but even more so because of your vid I'm going to get the patches here from you which is the most exciting part I will be supporting you and getting some merch as I have of course spiked the like and am subscribed Could you tell me about the number of patches that are in the package and how I can better support your channel? Thanks man 😊 Follow up Just downloaded your patches and loaded them into my GP 200 Haven't patched in yet to hear them but I'm very stoked that it's so simple to do which is a big relief because I'm tech deficient So the fact that you've served these up for free is very generous of you Very grateful and will follow up further with certain praises for their greatness as I know they'll be fantastic

[@TheLogan1186]

Just got this kit. Struggling with assigning the presets that I saved to the foot switches. I tend to save it and then when I access it again it sounds completely different from what I tweaked. Can someone assist with this issue? Cheers

[@GianfrancoTorrisimusic]

Hi nice Demo, thanks! perhaps it seems like there is some latency between effect switching...

[@arroncajigas4260]

May Tagalog version b neto sir Perf? ☺️

[@kenminerva]

Hey there man! Does this unit have acoustic nylon sim? Thank you!

[@OfficialPerfectoDeCastro]

Not a nylon acoustic sim but you could load an IR of one

[@ralphieralph9176]

this is like a birthday party/wedding-type of gig? noticed most people there are from your country, what was it? nice video!👍

[@OfficialPerfectoDeCastro]

Filipino bar/restaurant

[@mikejelinek1413]

I like your demo it was outstanding. What were you using for powering the Valeton live? Thanks in advance!

[@OfficialPerfectoDeCastro]

It was plugged into the PA via XLR

[@dennisdiaz6704]

How many assignable footswitch?

[@DocHelliday]

How's it holding up a year later?

[@OfficialPerfectoDeCastro]

I still have it, though it's more for backup since I've started gigging with amps again

[@sergiowremez]

Your review is amazing! I've got today from a friend to try out here in my house. I am using a baritone guitar tuned in A and I want to try a heavy distortion. Any suggest friend? thanks in advance.

[@Haunter3386]

Live will it work in this channel> Guitar>Gp200> Mixer> Final Output??? (without using any live amps)

[@davidmurray9193]

Im looking at this model and the boss gx100......still not sure which one yet

[@lance134679]

Great band. Also, the guitar tones are great from the live recordings.

[@richardchristensen1768]

Definitely subscribed and definitely getting your presets!! Just got my GP 200 and have been taking the time to go thru it with software You're awesome as a player and mentor ! Now I'm going to search your content for further instructions on usage of the unit and how to load your presets WARNING I may become a pest to your channel LMAO

[@OfficialPerfectoDeCastro]

Thanks for the sub!

[@jamesfloyd4930]

Sounds pretty fun, bro. Where is it made?

[@LORDOFROCK6]

Congratulations for your video !!! How can i charge the patches please ? Thanks

[@OfJaggedRisings]

Regarding the three different functions that you can assign the volume pedal… How does that work? Like if one function is gain, and one function is set to volume how do you actually differentiate between the two?

[@bobbyg1233]

You press down on the toe and it switches the pedal function A or B. You can also have an external exp

[@davidkay3443]

Wow that’s firstly some amazing playing. Very impressive. And the way the unit itself sounds is a lot better than I would have thought. Being somewhat of a digital noob I always use analogue pedals through and amp. ( am a dinosaur lol ) . But am I right in thinking this negates the need for any amp and can be played straight into front of house. Not being technical is that easy to do? I’m so tempted by this unit. Much respect and new subscriber right here from UK

[@OfficialPerfectoDeCastro]

This was all straight to FOH. The feel is going to be way different from analog pedals + amp but way more convenient

[@elbowjames7625]

What is the right way to say Valeton? How do the people from Hotone/Valeton say it?

[@rudyramos7211]

Does the volume pedal have a toe button to switch to wah?

[@angle.0255]

Does this have to be connected to an amp head or can it go straight into a cab and work like a fractal or quad cortex?

[@OfficialPerfectoDeCastro]

It needs a power amp like a SD Powerstage or similar if you want to plug it into a cab

[@angle.0255]

@@OfficialPerfectoDeCastro great thank you!

[@rodneyguinn1887]

Would you consider making a few more presets paid? I downloaded yours and really like them . But need a couple more sounds and i just can’t get the sounds you get maybe some guidance

[@OfJaggedRisings]

I’m still confused by the CTRL button. When it says there are 8 ctrls does it mean the 8 actual buttons on the unit itself?

[@cenaakashakash]

Can I set different patches on ABCD so that I can switch between them live?

[@jann_rygh]

Just played the GP200 yesterday and as a NUX MG30 User I must say that the GP200 sounds so much more transparent when playing Clean or crunch? Like the Highs have more Room or sth can that be? When I play CleanCrunch Tones with P90 or Singlecoil on my MG30 it sounds kinda compressed although the Comp is just slightly in the front....Will have to compare some Weeks but I really like the BaseSound out of the Box - 90% of the Presets are unuseable, for me, but the dedicated Amp Controls on the Front are Heavensent 💥

[@stringmaster_leo]

Even i found mg 30 to be a bit compressed... i returned mg 30 and then got delivered gp 200 jr yesterday... nd had to say... sounds pleasing to the ears... not sure bout others...

[@ThePro-q7h]

I have nux mg 30 now and am planning to buy gp 200. Is it a good move?

[@jann_rygh]

@@ThePro-q7h mh...I sold both because Neural DSP just blows both away 😂

[@RaymondPros]

Sir ano po gamit mo na guitar wireless system sa live nito?

[@KeyboardMac]

Very nice TESLA "Love Song" tone sir :)

[@emithestrada6338]

Hello, does this valeton give you the live gain volume???

[@Usucks3]

Hello, can u do a review of Boss ME-80? THANKS!🔥

[@VincenzoTomei]

Great! Since you are a HeadRush mx5 user, would you give as a comparison between the 2 units? I don't know which one to buy, i play mostly at home, i like ambient looping, I use a headrush Pedalboard which i love, but too big for my room, so i was going for a MX5, but now the gp200 tempts me a lot because the quick access to basically everything, can you explain some differences and in which case one would be better than the other? Thanks a lot

[@jaychen2000metal]

I'm not getting any volume. I can hear my guitar but it's super low hooked through my amp effects loop...

[@TheBlueskyson]

Thx bro. But the guitar tone on your actual channel introduction clip sounds much better than the tones live! lol. ty anyway. Feliz navidad.

[@zeropointzeroband]

THANK YOU!

[@thrasheradventure3867]

what about quad cortex

[@muni-muni1555]

Sir Perf I just recently saw on your wiki profile na you won NAMCYA. Please tell us the story, would love to hear it especially how it was competing against sir Manuel Cabrera and Sir Joseph Mirandilla.

[@ngo3657]

how did you got amplify in the show of the video? very helpful video !

[@OfficialPerfectoDeCastro]

Straight into PA via XLR

[@kazeaze9572]

Can you do the oscillation thingy on the valeton gp200?

[@voodootattoo9057]

Cool video. Your singer is amazing too

[@avisorussell]

Sir Perf, is a Boss Me-80 is still worth buying?

[@aaronsbshshh]

which one is better in your opinion, gp200 or mg 30?

[@OfficialPerfectoDeCastro]

@@aaronsbshshh GP200 has more buttons for flexibility

[@aaronsbshshh]

Oh, I see. Thank you for answering. In terms of sound quality, which one do you think is better?

[@lesliejin4809]

Do you connect ur gp 200 to fx loop or direct to PA?

[@OfficialPerfectoDeCastro]

Direct to PA

[@Xisco1103]

I watched your demo with the valeton gp200 and Nux mg30, any suggestions which one I can choose, thank you Sir Perf.

[@OfficialPerfectoDeCastro]

I prefer this for since it has more footswitches