Brandon's GT35 Twin Turbo LS 5.3 Sloppy Stage 2 Cam Dyno

Stock 5.3
862 Heads with upgraded springs for cam
Sloppy Stage 2 Cam
Twin GT35 eBay Turbos
Megasquirt
E85
80 lbs Deka Injectors
450 lph Fuel Pump
TH400 Transmission
Ford 9" Rear End

[@SloppyMechanics]

nice work guys!

[@CarportGarageDragRacing]

Thanks you, this was built based on your information.

[@CarportGarageDragRacing]

Unfortunately Brandon sold this car so it will no longer be on the channel. But I will be putting a turbo on mine when funds permit and I am leaning towards going with twin eBay or Maxpeedingrods GT35s and upgrading to VSR 6762 later or do a single eBay GT45 and upgrading later to a S475 or S480 later.

[@BadLuckGarage]

Pretty close to the same combo we have in our 3rd gen Chaos Theory. We've been 5.84@120 in that car so far on only 16ish lbs of boost and 21 degrees. Full weight, full interior street car. 👍 You're in for a ride fellas! Once you get her dialed in and start turning it up you're gonna run out of pump and injector fast though. Just something to think ahead on.

[@CarportGarageDragRacing]

Yours use the eBay twin GT35s?

[@BadLuckGarage]

@@CarportGarageDragRacing Using the ebay billet gtx3582rs. So they've got a billet 64mm wheel instead of the cast 61mm wheel like the standard gt3582s. Otherwise they're the same turbos. The entire build is on my channel in the Chaos Theory Camaro playlist. We're doing some safety and suspension work over winter and shooting for low 5s in the spring. If these turbos wont get us there we've got a set of 67/62s that are going on once we max these out.

[@CarportGarageDragRacing]

@@BadLuckGarage I'll check it out

[@ALEX.THE.RUSSIAN]

Hoe much power did you guys make at 16 ish psi?

[@BadLuckGarage]

@@ALEX.THE.RUSSIAN trap speed and weight says just shy of 800 on that pass.

[@chvyxtreme]

What size blow off and waste gate was used with this twin gt35 set up

[@CarportGarageDragRacing]

50mm bov and 38mm wastegates

[@jbwhite28]

What radiator did you go with?

[@CarportGarageDragRacing]

I'm not sure. He bought it that way. Most use the Griffin in these types of swaps.

[@shawnc757]

nice! t3 or t4 flange?

[@CarportGarageDragRacing]

T3

[@shawnc757]

@@CarportGarageDragRacing by chance know what the A/R is on the turbine housing?

[@CarportGarageDragRacing]

@@shawnc757 70/63

[@CarportGarageDragRacing]

@@shawnc757 they are just the eBay GT35

[@shawnc757]

@@CarportGarageDragRacing awesome bud i appreciate that. Subbed! Don't mean to be a nuisance but im in the process of figuring out my build for late next year