Jets for Bofeng carbs (one with red covers, not NT Speed): www.amazon.com/gp/product/B09JSQD7C5 also this is a bad tutorial video but whatever I'll always improve my content, editing, tutorials etc.
@2strokezoomies4 ай бұрын
❤ it bro can’t wait to see more I’m here for the long run I got 83 years left for it lmao I’m never gonna forget these kits at all they make me happy
@DirectCurrent4u3 ай бұрын
Awesome Light Show! Really appreciate all Your hard work and time You put into these videos! Very informative and down to earth.that light show was a real bonus! Keep up the awesome work my friend!👍
@nicholaslafferty39282 ай бұрын
Very informative! Thanks for the knowedge and inspiration
@dustinh41754 ай бұрын
I mix my gas in a big mason jar that has fluid oz marks. I just fill to the 32 mark and add a an ounce of oil.
@sleepered76924 ай бұрын
Good mecanic video man you know you have another time green position on you bike try to run same level on your crank one foot front and one back 🤘🤘🤘
@ExpediteTravels3 ай бұрын
You should try some Klotz bean oil it's castor oil with a red dye in it I believe it's 80% castor and 20% synthetic smells great
@StaePulz-qr7ll4 ай бұрын
I enjoy your channel and your videos I was just curious that my crap behind you the black one where did you get that exhaust on that thing is that a real and see what is that
@mikemiller33034 ай бұрын
Thanks for the informative video brother
@cheri7583 ай бұрын
I use a 1l water bottle, put about 1l of gas, european 98 octane, motul 710 or 800 factory line road racing, 1:32, and thats pretty much what i do, i put my oil woth a medical syringe, even tho i do 1:32 i always put that tiny bit of oil more, so makes it prob 1:31 or something like that
@2StrokeMoto7964 ай бұрын
Good video thanks for the ride
@eumid4 ай бұрын
New video lets fuckin go
@kennethlloydr.sentino9344 ай бұрын
Bro nice transition didnt saw that coming🔥🔥
@Zjones82Ай бұрын
Hey man where do you get your kits from they sound so good
@krabbypatty-x5l2 күн бұрын
Isn't it bad to wide open throttle during break in? I want to WOT my bike but I don't want it to blow up at the same time.
@trentbikes2 күн бұрын
Not really. Just get it tuned/dialed in. WOT for 5-10 seconds, then slow down and cool down, and repeat.
@krabbypatty-x5l2 күн бұрын
Okay thanks man!
@Treythebikebuilder3 ай бұрын
personally i use lucas racing oil for my 2 strokes and have never had a problem with it and it very affordable
@panostzo74 ай бұрын
I have tried what you said about breaking in and go fast,i only went for 5 seconds with correct oil ratio and clean ports...The piston will scratch the cylinder and where did you find this information (go fast and stop and again)?
@trentbikes4 ай бұрын
Going fast, stopping and cooling down, then again, varying the rpms in the process is doing heatcycles to your top end. wdym scratch the cylinder? You must have some metal shavings or pieces lodged in the rings or something.
@michaelbrinks8089Ай бұрын
Always Always Always take these new 2 strokes and clean the metal dust & shavings out before the 1st start. I'm still on my same engine from Jan 2021. Although I switched the too end from 47mm to a 49m. Iron sleeve for slightly more power. But both cylinders are still good.
@gregorykucera42353 ай бұрын
Great video thanks
@RowansTalkShow2 ай бұрын
How long do you think these type of bikes last you with good maintenance?
@alrums4 ай бұрын
Hell yeah
@kimdecastro91564 ай бұрын
this is a great video
@andrewmilligan96754 ай бұрын
Super helpful info! Thanks man!!!
@Toxic2T4 ай бұрын
0:07 was it another two stroke? It sounded brutal
@trentbikes4 ай бұрын
Surron
@Toxic2T4 ай бұрын
@@trentbikes I thought those pitbikes were electric. Sounds so good
@trentbikes4 ай бұрын
@@Toxic2T They are electric
@trentbikes4 ай бұрын
@@Toxic2T lol my bad. I thought you were talking about that dude popping wheelies on the surron.
@Toxic2T4 ай бұрын
@@trentbikes hahaha I just realized it! But was it a 2 stroke scooter screaming at the beginning? It sounded tuned af.
@manuramos96383 ай бұрын
Where do you buy the exaust of the plated bicycle!!
@trentbikes3 ай бұрын
Huh?
@theLyzhendricks4 ай бұрын
My mini bike goes 40 and feels insane my motorized bicycle tops at 36 but even that extra 4 mph has got to feel insaine
@furmaster2124 ай бұрын
Cool to see someone else using castor. Personally use Klotz super techniplate. NOTHING beats the compression and wrist pin oil retention of castor oil!
@nadahog15694 ай бұрын
reed valve. good carb. good port work. mzmiami head. and a ramped piston... easy 55mph all day long.
@trentbikes4 ай бұрын
I already ported it and did upgrades and mods to it. Not going to put a reed valve on it though. My other bike has an athena sport on it that can hit 60-65mph.
@ExpediteTravels4 ай бұрын
I'm in the process of breaking my engine in at the moment I ran 20 to 1 fuel mix just regular Walmart universal 2-cycle oil after I'm done two tank fulls of that I will switch it over to full synthetic
@michaelbrinks8089Ай бұрын
1st thing I did was take apart the new engine, inspect & cleaned all the metal dust and metal shavings out.....Then just ran 32:1 for break in. Riding slow 50- 75% of throttle for 3 heat cycles. While checking for loose 🔩. On the 4th ride I started riding like normal with 0 issues....Some people get super OCD about break-in running 20:1 oil or more for 3 full tanks. Taking a month to break in a $75 engine. Many chainsaw builders who have rebuilt 50+ saws. Say all they do is make sure it's clean. When put back together. Start it up, do 1 heat cycle, shut it off, check everything. Maybe check it over again on #2 start up and then use it normally. Basically 1 or 2 heat cycles and 🔩/leaks check...With 0 problems from little to no break in. Others say 40:1 from 1st start to end of engine life with no issues. I like to run about 35:1 but 32:1 to 40:1 really doesn't make much difference. 32:1 will actually run a little hotter temp 🔥 than 40:1 but despite running say 15F hotter. It's providing more lube. An accurate YT chainsaw temp temp. Showed 25:1 ran quite a bit hotter than full synthetic 50:1...My snowblower says run 50:1 but I think that's because they want it to break sooner. So I use 40:1.....
@darkstar927724 ай бұрын
Since you are dead and can’t hear the engine can you tell from the vibrations of whether it’s tuned right or not?
@trentbikes4 ай бұрын
I can hear anything, I have a cochlear implant.
@mrcleanisin4 ай бұрын
Got mine up to 45mph on a level road and I weigh 200 lbs. I shaved a little off my head to increase compression.
@trentbikes4 ай бұрын
removing material in your combustion chamber decreases compression. more cc volume.
@mrcleanisin4 ай бұрын
Shaved means to lay the head on a sanding block and rub the bottom of the head. This decreases the head volume and increases compression.
@trentbikes4 ай бұрын
@@mrcleanisin Oh, that's what you meant, yeah sure
@DirectCurrent4u3 ай бұрын
@@trentbikes 💯Fact!
@xxlegendarygamer46503 ай бұрын
Is mineral oil ok to use in these bikes with unleaded petrol
@trentbikes3 ай бұрын
@@xxlegendarygamer4650 lol definitely not. You need two stroke oil
@xxlegendarygamer46503 ай бұрын
@@trentbikesit says 2 stroke oil on the bottle but it’s mineral, when I ride the bike for the first couple minutes oil comes from the top cylinder head and I don’t know where it’s coming from, could this be due to the oil? I’m on a 16:1 ratio
@xxlegendarygamer46503 ай бұрын
And after a while it starts riding decently and oil stops spluttering little bits out the cylinder head
@trentbikes3 ай бұрын
@xxlegendarygamer4650 why 16:1? You're following these bad manual instructions aren't you? 16:1 is a waste of money and oil. Use like 25:1 at least. I use 32:1 from cradle to grave depending on cylinder
@trentbikes3 ай бұрын
@@xxlegendarygamer4650 you have a head gasket leak, tighten head down or replace gasket
@Zerocyde4 ай бұрын
Man, I need to get off my butt and finish the trim\paint if you're gonna make videos by the back door, lol.
@trentbikes4 ай бұрын
Lmao
@isaacbrown5114 ай бұрын
Nice Chevy shirt
@acorncz47524 ай бұрын
I don't know if it's good but i run a 100 octane with my yd 100 sometimes. It smells sweet and seems to run fine but idk. We have some goofy ass gas in my country so we can't put 95 oc into two strokes anymore.
@theLyzhendricks4 ай бұрын
What country😂
@acorncz47524 ай бұрын
@@theLyzhendricks Czech Republic hahaa
@Matthew-wj8cm4 ай бұрын
Zdravím motokolaře😂. Pravě jsem koupil Avenger válec. Snad prvni v ČR. Uvidíme jak to pojede.@@acorncz4752
@DirectCurrent4u3 ай бұрын
@acorncz4752 I always run 100 Octane Aviation fuel in my race bikes!
@leonardarola4 ай бұрын
What else do you want from it?! Gotta up your own game. You can do more, better.
@trentbikes4 ай бұрын
wdym?
@leonardarola4 ай бұрын
@@trentbikes ohh kid, you never seen a real race bike before, have you?!
@trentbikes4 ай бұрын
@@leonardarola ohh you mean that lol. Yeah I don't race. I just like going fast and all
@leonardarola4 ай бұрын
@@trentbikes c'mon, you are young.
@trentbikes4 ай бұрын
@@leonardarola Yea, not my thing. Also there's like no race tracks for motorized bikes or whatever around here.