Breaking in a Bicycle Engine (Avenger 85)

Рет қаралды 5,585

Күн бұрын

Пікірлер: 73

@trentbikes 6 ай бұрын

Jets for Bofeng carbs (one with red covers, not NT Speed): www.amazon.com/gp/product/B09JSQD7C5 also this is a bad tutorial video but whatever I'll always improve my content, editing, tutorials etc.

@2strokezoomies 6 ай бұрын

❤ it bro can’t wait to see more I’m here for the long run I got 83 years left for it lmao I’m never gonna forget these kits at all they make me happy

@DirectCurrent4u 5 ай бұрын

Awesome Light Show! Really appreciate all Your hard work and time You put into these videos! Very informative and down to earth.that light show was a real bonus! Keep up the awesome work my friend!👍

@krabbypatty-x5l Ай бұрын

Isn't it bad to wide open throttle during break in? I want to WOT my bike but I don't want it to blow up at the same time.

@trentbikes Ай бұрын

Not really. Just get it tuned/dialed in. WOT for 5-10 seconds, then slow down and cool down, and repeat.

@krabbypatty-x5l Ай бұрын

Okay thanks man!

@dustinh4175 6 ай бұрын

I mix my gas in a big mason jar that has fluid oz marks. I just fill to the 32 mark and add a an ounce of oil.

@ExpediteTravels 5 ай бұрын

You should try some Klotz bean oil it's castor oil with a red dye in it I believe it's 80% castor and 20% synthetic smells great

@cheri758 5 ай бұрын

I use a 1l water bottle, put about 1l of gas, european 98 octane, motul 710 or 800 factory line road racing, 1:32, and thats pretty much what i do, i put my oil woth a medical syringe, even tho i do 1:32 i always put that tiny bit of oil more, so makes it prob 1:31 or something like that

@sleepered7692 6 ай бұрын

Good mecanic video man you know you have another time green position on you bike try to run same level on your crank one foot front and one back 🤘🤘🤘

@StaePulz-qr7ll 6 ай бұрын

I enjoy your channel and your videos I was just curious that my crap behind you the black one where did you get that exhaust on that thing is that a real and see what is that

@nicholaslafferty3928 4 ай бұрын

Very informative! Thanks for the knowedge and inspiration

@johnjeffries8701 23 күн бұрын

Hey I'm ready to upgrade my carb. What is the one you suggested that is fully adjustable. You said it didn't need any jetting.

@kennethlloydr.sentino934 6 ай бұрын

Bro nice transition didnt saw that coming🔥🔥

@mikemiller3303 6 ай бұрын

Thanks for the informative video brother

@Treythebikebuilder 5 ай бұрын

personally i use lucas racing oil for my 2 strokes and have never had a problem with it and it very affordable

@Zjones82 2 ай бұрын

Hey man where do you get your kits from they sound so good

@CGBike796 6 ай бұрын

Good video thanks for the ride

@eumid 6 ай бұрын

New video lets fuckin go

@gregorykucera4235 5 ай бұрын

Great video thanks

@manuramos9638 5 ай бұрын

Where do you buy the exaust of the plated bicycle!!

@trentbikes 5 ай бұрын

Huh?

@kimdecastro9156 6 ай бұрын

this is a great video

@darkstar92772 5 ай бұрын

Since you are dead and can’t hear the engine can you tell from the vibrations of whether it’s tuned right or not?

@trentbikes 5 ай бұрын

I can hear anything, I have a cochlear implant.

@andrewmilligan9675 6 ай бұрын

Super helpful info! Thanks man!!!

@RowansTalkShow 4 ай бұрын

How long do you think these type of bikes last you with good maintenance?

@theLyzhendricks 6 ай бұрын

My mini bike goes 40 and feels insane my motorized bicycle tops at 36 but even that extra 4 mph has got to feel insaine

@ExpediteTravels 6 ай бұрын

I'm in the process of breaking my engine in at the moment I ran 20 to 1 fuel mix just regular Walmart universal 2-cycle oil after I'm done two tank fulls of that I will switch it over to full synthetic

@michaelbrinks8089 2 ай бұрын

1st thing I did was take apart the new engine, inspect & cleaned all the metal dust and metal shavings out.....Then just ran 32:1 for break in. Riding slow 50- 75% of throttle for 3 heat cycles. While checking for loose 🔩. On the 4th ride I started riding like normal with 0 issues....Some people get super OCD about break-in running 20:1 oil or more for 3 full tanks. Taking a month to break in a $75 engine. Many chainsaw builders who have rebuilt 50+ saws. Say all they do is make sure it's clean. When put back together. Start it up, do 1 heat cycle, shut it off, check everything. Maybe check it over again on #2 start up and then use it normally. Basically 1 or 2 heat cycles and 🔩/leaks check...With 0 problems from little to no break in. Others say 40:1 from 1st start to end of engine life with no issues. I like to run about 35:1 but 32:1 to 40:1 really doesn't make much difference. 32:1 will actually run a little hotter temp 🔥 than 40:1 but despite running say 15F hotter. It's providing more lube. An accurate YT chainsaw temp temp. Showed 25:1 ran quite a bit hotter than full synthetic 50:1...My snowblower says run 50:1 but I think that's because they want it to break sooner. So I use 40:1.....

@alrums 6 ай бұрын

Hell yeah

@furmaster212 6 ай бұрын

Cool to see someone else using castor. Personally use Klotz super techniplate. NOTHING beats the compression and wrist pin oil retention of castor oil!

@mrcleanisin 5 ай бұрын

Got mine up to 45mph on a level road and I weigh 200 lbs. I shaved a little off my head to increase compression.

@trentbikes 5 ай бұрын

removing material in your combustion chamber decreases compression. more cc volume.

@mrcleanisin 5 ай бұрын

Shaved means to lay the head on a sanding block and rub the bottom of the head. This decreases the head volume and increases compression.

@trentbikes 5 ай бұрын

@@mrcleanisin Oh, that's what you meant, yeah sure

@DirectCurrent4u 5 ай бұрын

@@trentbikes 💯Fact!

@xxlegendarygamer4650 4 ай бұрын

Is mineral oil ok to use in these bikes with unleaded petrol

@trentbikes 4 ай бұрын

@@xxlegendarygamer4650 lol definitely not. You need two stroke oil

@xxlegendarygamer4650 4 ай бұрын

@@trentbikesit says 2 stroke oil on the bottle but it’s mineral, when I ride the bike for the first couple minutes oil comes from the top cylinder head and I don’t know where it’s coming from, could this be due to the oil? I’m on a 16:1 ratio

@xxlegendarygamer4650 4 ай бұрын

And after a while it starts riding decently and oil stops spluttering little bits out the cylinder head

@trentbikes 4 ай бұрын

@xxlegendarygamer4650 why 16:1? You're following these bad manual instructions aren't you? 16:1 is a waste of money and oil. Use like 25:1 at least. I use 32:1 from cradle to grave depending on cylinder

@trentbikes 4 ай бұрын

@@xxlegendarygamer4650 you have a head gasket leak, tighten head down or replace gasket

@Toxic2T 5 ай бұрын

0:07 was it another two stroke? It sounded brutal

@trentbikes 5 ай бұрын

Surron

@Toxic2T 5 ай бұрын

@@trentbikes I thought those pitbikes were electric. Sounds so good

@trentbikes 5 ай бұрын

@@Toxic2T They are electric

@trentbikes 5 ай бұрын

@@Toxic2T lol my bad. I thought you were talking about that dude popping wheelies on the surron.

@Toxic2T 5 ай бұрын

@@trentbikes hahaha I just realized it! But was it a 2 stroke scooter screaming at the beginning? It sounded tuned af.

@nadahog1569 6 ай бұрын

reed valve. good carb. good port work. mzmiami head. and a ramped piston... easy 55mph all day long.

@trentbikes 6 ай бұрын

I already ported it and did upgrades and mods to it. Not going to put a reed valve on it though. My other bike has an athena sport on it that can hit 60-65mph.

@acorncz4752 6 ай бұрын

I don't know if it's good but i run a 100 octane with my yd 100 sometimes. It smells sweet and seems to run fine but idk. We have some goofy ass gas in my country so we can't put 95 oc into two strokes anymore.

@theLyzhendricks 6 ай бұрын

What country😂

@acorncz4752 6 ай бұрын

@@theLyzhendricks Czech Republic hahaa

@Matthew-wj8cm 6 ай бұрын

Zdravím motokolaře😂. Pravě jsem koupil Avenger válec. Snad prvni v ČR. Uvidíme jak to pojede.@@acorncz4752

@DirectCurrent4u 5 ай бұрын

@acorncz4752 I always run 100 Octane Aviation fuel in my race bikes!