Don't Blow Your Motorcycle's Motor.... (636 Build Eps. 2)

[@brian636]

Enter here for your chance to win this never stunt, freshly built 636 featured in this series! Much Love Brian 636! www.patreon.com/brian636

[@kxnggayle2131]

I see you beating around the hood eats bush

[@brendanb.9359]

@@kxnggayle2131 lolol

[@brian636]

Injured right now man, I’m a man of my word

[@spacceoutt]

Yoo I live in Chicago too , would I still have a chance lol

[@charleer6stuntz624]

Thanx 4 this vid brother I had no idea about this I'm gna have to figure how to do the clean air mod on my fz1 good lookn out

[@Dankwheelie]

So crucial, crazy how many people have never heard of this but go thru motor after motor 😏

[@noordana4013]

I wonder...........🤔 LOL

[@mike1156]

Dankwheelie how exactly does it destroy the motor? It’s just oil?

[@ZoeAndHerTales]

Dankwheelie it was interesting to watch actually. Lol, learned something new today. I like knowing how things operate and one of those thing are stunt bikes!!

[@brian636]

You aren't lying my guy

[@Infamous_636]

@@mike1156 I’m a year late on this, but lol is a liquid, if you were to say overfill your oil then it would be sucked into the cylinder heads and you can’t compress a liquid which would bed your piston rods making them useless and causing damage to your motor that is pretty much non-repairable. Hope my reply is good, anyone have any other info, comment back and tell me if I got anything wrong 👍🏻

[@karaelizabeth429]

Can’t wait to see who ends up with this beauty!!!

[@mike1156]

If I won this I would kiss Brian! 😘😝

[@sleepyeye_racing9750]

Just picked up an old beat up 636 yesterday, your videos have inspired me to get into stunting, and these build videos will help me get the old beast right, she is rough but good enough to learn on, then hopefully I can win this beauty and have a clean one for when I start getting somethings down

[@brian636]

Hell ya Dereck! Means alot to hear that

[@392sl1me]

Using your videos to make my first build... Thank you for the help and motivation!

[@brian636]

My mannnnn

[@Lucky-td4qm]

I just did this on my 2021 636... THANK YOU BRIAN! It's still pretty much the same thing, except there is an electrical connection to the smog pump... all I did was keep that peice connected, but took out all the hoses that were connected to the pump 😂 no check engine light so its good... I will update later if something bad happens 😅

[@Tow_Sr.]

Just that simple.. well done brian . She can breath . !!!!! Safely now . !!!!! On 1 wheel !!!!😁😁🔥🔥

[@brian636]

Wam, bam, thank you maam!

[@royjsilverback7644]

Duuuuuude. Please please make more video like this. I am looking to build a stunt bike and have no friends that stunt. This is so good bro. Stay safe

[@brian636]

I will keep them coming man! Whole build going on this bike!

[@stuntbikejourney9582]

What’s up Brian. Super helpful video. You really explain what you’re doing well and make it easy for us to follow. I will definitely be doing this to the cbr this weekend. Thanks for the tip man. The bike I’m starting to learn to stunt with has 33,000 miles so I want to make sure and take care of it right so it can break 50,000 like your 636.

[@brian636]

Thank you man! Take care of them and youll be good.

[@250SLUSH]

I’m doing this on every bike I own now. Thank You!! 🤟🏾

[@umbreonsfriend4548]

Thank you so much Brian!! Just installed the clean air mod on my 2003 ZX6RR 🙂 only confusing part was that you said to plug 3 holes on the airbox and later on in the video you say that you left one unplugged for the drain thingy. Appreciate all your help brotha! You and Dank has some sweet videos i hope to be as good as you guys some day

[@Infamous_636]

I noticed that too, I did mine, now I gotta go back and take out a screw I put in there

[@FailsAndFightsFNF]

Great video! Right to the point

[@brian636]

My man! Good to see you on the vidos my guy

[@FailsAndFightsFNF]

brian_636 bro I have your post notifications on. I love your hood eats series

[@texasroper2222]

Thanks for the video man. I'll be doing this to my 2020 636 right away!

[@ricardomaldonado7686]

It's all about the blue! Awesome bike Brian!! Nice build did an awesome job.

[@brian636]

I love it!

[@whatever-gg2qs]

My bike is lookin good just sittin there. Keep up the good work on my bike brian thanks. Ohh ra

[@brian636]

Hell ya man!! Good luck!

[@ArabianRider]

this is crazy, never knew you had to do these little tweeks. so cool.

[@brian636]

Thank you man, glad you are like the series

[@StreetBikeTakeoverYT]

Found a minty 04 zx6rr, not a 636 but she's purty and all stock... Gonna pick it up in less than 2 weeks, can't wait to get this build going!

[@brian636]

Hell ya man!!!!! Good deal

[@bikerbiker4306]

Man you are the best stunter youtuber guy ever your fan from iraq 🇮🇶❤🇺🇲

[@heyderibraheem192]

سويتهه الطريقة على دراجتك لو لا؟

[@thegospelofvanlife9381]

Funny, you are acctualy my most favorite motovloger , you and DANK WHEELIE, BRYAN 636 kicking up another knotch, baby, yeah!!!!!! Nov,2019.

[@brian636]

You are my favorite commenter!

[@joey-sq9jw]

awesome video! bike going to look so good when it’s done!! 🙌🏻

[@brian636]

My man Joey!!!!!

[@ZoeAndHerTales]

How dare you undress her without telling us her name first!! 🤣😂 Yup, I’m a dork!!

[@brian636]

Thats how we do it lol

[@ZoeAndHerTales]

brian_636 That’s what I’m seeing lol!!

[@ApexPowerSportsllc]

T fitting the pair valves and then T fitting the crank to those & the filter. The pair valve on the valve cover was connected onto the airbox to vent

[@brian636]

You can do that but then there is no venting of the motor which is very important.

[@ApexPowerSportsllc]

@@brian636 Definitely needs to be vented. I personally use 2 T fittings 1 at pair valves & the other T gets split to end of the pair valve's T, 1 end to the crank, 1 end to the filter

[@kawosszz]

@Conway could you send me a picture of what it looks like?

[@IdanActual]

I'm just enjoying watching your videos everyday all day🔥 Keep up the good content my guy Love from Israel♥️🙏🏽

[@brian636]

Thanks brother!!! Really appreciate you!

[@IdanActual]

@@brian636 I was Hope for a Like on my comment but a replay is good too Lol

[@Mobiusshazarr]

Didn't know I needed a new 636 vid so bad today.

[@brian636]

HAHAHHAHA Glad to have you here man

[@bikerbiker4306]

I am really Enthusiastic for this beautiful bike

[@teflondon1620]

And u shop at autozone... man u keep getting better and better 😎😎 I work at AZ lol

[@brian636]

Autozone ONLY loling

[@hojmacdonald]

I’ll be watching Tell Matt wasup from the friendly Canadian 🇨🇦

[@brian636]

Hell ya brother! Much love

[@marcotrujillo4279]

Crazy, I don’t know if you know this but this is a mod on race engines, they use a “catch can” it lets the engine breathe easier and helps create a better piston seal, on Honda’s they use ports on the block and valve cover, I would keep the top ports connected and vented to help vent the engine better

[@brian636]

Wow!!!! Cool to see the similarities!

[@zakaxy]

If I ever buy one I will need your help modding it 🤣🤣🤣

[@brian636]

Hell ya man!! Thats why I make these videos.

[@creton600]

Man a clean non stunted 636 is so damn clean.

[@brian636]

Got to love it

[@zareenpermessur2115]

Awesome video brian !!! Bike is going to look like a beautiful beast after that 😍

[@brian636]

Thanks Zareen!!!

[@g-moneyrides8341]

Great vid Bro! Well thought out, planned & executed. Straight to the point, no fucking around. Good sound advise throughout the video. I defiantly learned something new today. Thx Man. Be safe out there my Dude!!

[@brian636]

Thanks brother. Glad you guys are gonna enjoy the build!

[@dustinureyes]

I did this for the first time a month ago on my 04 636👌

[@brian636]

Good thinking bro!

[@adrianomclean2218]

WHATUP JUST FINNISH watching DANKWHEELIE REBUILD

[@brian636]

WHAT UP ADRIANOOOO

[@DynamicVlogs69]

Thanks for this video. Stuff I had no idea about. Would love to see more technical videos like this since I'm going to grab a random 636 before the end of the month, btw if anyone has something hit me up. Even a beat up pre-built stunt bike let me know. I'll travel if it's rideable.

[@brian636]

They will be coming with this build brother!

[@grantmp5365]

Do you need to do these to all the brands example r6 gsxr 600 ......

[@bikerbiker4306]

brain 636 I give you my all respect 🌹❤

[@brian636]

Thank you Biker Biker!!! Much love.

[@chrisr6]

Dude , that color 😍

[@brian636]

I love the blue

[@chrisr6]

@@brian636 yea man that bike looks gorgeous, I'm sure once your done with it is gonna be hard to let her go.

[@timvandriessen8773]

I see you short the pair valves, Don't they also put fresh air in the exhaust port so unburned gases burn in exhaust and so heat up the cat ? Did you remove the cat otherwise this might clog up after time ? Nice video's man sick that you do all this! great work

[@clutchliger5800]

Appreciate the video man🙏

[@brian636]

Appreciate you man!

[@HOOLIGANfilmz]

Much love! PEACE!

[@brian636]

Got to love it man

[@kc.95]

Pls always post videos fix engine and like this stuff bro thanks

[@brian636]

Will do man! Glad you are digging them!

[@Ghostface97]

Do you not have to rejett it? Or can you just put it straight on the carburetor on other bikes that are exposed?

[@oldninjarider]

Tech tip: Go on Amazon and get some Silicone caps and plugs, it'll make the job easier for capping the holes on the air box and blocking vacuum lines.

[@brian636]

That is true. Just doing the budget way hahahha

[@troymccoin8469]

Thanks lol i was wondering why i had some oil in my airbox now i know why lol

[@brian636]

Glad I could help!!!

[@troymccoin8469]

brian_636 thanks its my dads bike has not ran in 10 years all i did was adjust throttle screw and it ran tearing bike down an replacing everything thought it was blown because of oil in the air box lol

[@huknowes6093]

@brian_636 so you said I can use block off plates when doing the clean air mod right? Instead of connecting the tube in between the two stock plates

[@gabrieljimenez844]

Thank you so much for this video!

[@brian636]

Thank you for watching!

[@gsxrJOE92]

Another great vid Bri... 🤜💥🤛

[@brian636]

What up brother!!!!

[@GoonRides]

hell yeah!

[@emilioantonio1861]

Sweet vids I got a zx9 01 wanting to stunt

[@Lucky-td4qm]

do you keep the stock air filter in there?

[@pashash7312]

Hello, I've similar bike to u and have this kind of problem, throttle system isn't opening or closing after i open starter, voltage is too low in this case and can u tell me what can be the problem in this situation, have changed throttle already and problem wasn't solved?

[@remixedMind]

why not connect the breather hose to the reed valves so it will do vacuum in the crank case for some low end power? I had mine this way.

[@brian636]

Because the motor will not be properly vented.

[@allanm2306]

Great vid as always!

[@brian636]

Thanks ALlan!

[@okatexoffroad1813]

Keep it clean. And stanky with the dank .

[@brian636]

Hell yes!

[@teodorozimek7001]

very useful video!

[@brian636]

Thanks brother!

[@stuntbikejourney9582]

@brian_636 I am doing this on my cbr600rr and it’s a little different. All of the threads I’m finding are showing it done without using the crank case breather that you are using. Will this way work without the filter?

[@stuntbikejourney9582]

Also there is a pair valve and plug on it. When I remove that is it going to throw an fi light? I’ve never done this mod before

[@brian636]

Yes it is pretty much the same thing here man!

[@stuntbikejourney9582]

Awesome thanks man.

[@reborn_walk252]

keep up the good work!!

[@brian636]

Will do homie!

[@leylaskye8246]

Hey is me Askenaz take care

[@brian636]

Hey Askenaz!

[@jeff6369]

So no need to plum it to the top of the motor?

[@cristiankid717]

Is this video any different from the one you did 2 years ago?

[@mcdodda1014]

Another great vid

[@brian636]

Thanks Dakota!

[@michaelcleary5205]

Any recommendations for pipes I need something that won’t attract police.....

[@hp4r24]

this is work on z900? i want to do as well

[@amantek3545]

Would this work on Hondas too?

[@jameskelly324]

You are the best

[@brian636]

Thanks brother!!!

[@jameskelly324]

Love the bike

[@garyeverett3388]

Gr8 vid dude

[@brian636]

Thanks Gary!

[@PuroPinchePancakes]

Yo my dude. 19 zx6r trying to do this. So i do not need block off plates if i do it this way right??? Bouta get balls deep into mine and do this if so 🤙🏽

[@shs646]

When Is the speedo video coming??? Getting colder by the day.. HaHa

[@brian636]

As soon as I get to somewhere that is above 30 degrees haahhahahha

[@63trix6]

Do you have too do the same thing to a Parallel twin?

[@brian636]

Depends how it is set up

[@Abc-ps9ox]

Do i Need to do this to my mt 07?

[@abielvalentin2231]

Do u know any videos u can plug that shows how to do this for a drz400

[@brian636]

Not sure on that one brother

[@bradleythomsen3083]

Helpful video. Maybe this is dumb, but I assume this isn't necessary on supermotos?

[@brian636]

On most you do need to do this brother.

[@bradleythomsen3083]

Fahk. I was wondering why my dealership put so much oil on the air filter. And why my new bike was burning so much oil.

[@smokeythebear2721]

Can you tell me if I should do this to my 2018 FZ07?

[@brian636]

Yes sir!!!

[@smokeythebear2721]

brian_636 thank you!

[@smokeythebear2721]

brian_636 do you know anyone who’s done one that could post a video or even just send pictures of what it looks like?

[@osalcedoucmsae]

Hey @brian_636, I got one just like this in Cali but my gas tank has 3 little hose connections at the rear(under the seat). Have you seen this commonly or do you know if there any issues with blocking that too? Thanks man

[@brian636]

They have a weird charcoil box on them in they are from Cali, don't have much experience.

[@garyeverett3388]

I did this on my 2000 r6 but it spits oil out gradually so I ran it up behind my seat and nylon strapped to my 12 o'clock bar. Is it normal when you ride hard to have oil residue coming out?

[@brian636]

Yes, a small amount coming out is normal.

[@justindodge9047]

I imagine this'll be basically the same as on my '03 F4i?

[@brian636]

Yes sir!

[@justindodge9047]

@@brian636 awesome, thanks man!

[@eddieo6564]

I need that I’m trying to learn I got a grom

[@brendanb.9359]

Awww shit. Do i see a kentucky speedo eatz in the near future????

[@brian636]

You just might lol

[@brendanb.9359]

@@brian636 just dont rush healing lol

[@moonn6202]

Wait the small shield one?

[@brian636]

What?

[@raulchavez3034]

Can you do this mod on your bike even if is not a stunt bike? 🤔

[@daleprechaun1791]

Nice.

[@brian636]

WHat is up brotherrrr

[@anthonyvallejos3723]

Hey bro my air hose (the one you put a filter on) was just hanging free … it wasn’t attached to anything on the end where u put a filter ….. i had my oil light come on today and im tryna figure out if thats my problem .. please get back to me ! I (it was setup exactly like urs is) except for filter

[@Dwit2EEs]

YO @Brian_636 next time u at AutoZone, come on Madison n Lotus and I'll get u straight bro! Keep the vids coming bro 👊🏾✊🏾🏍️💨

[@brian636]

Will do man!!!!!!

[@brian636]

I know EXACTLY where that is. Ride past all the time!

[@Dwit2EEs]

@@brian636 I be seeing the wolf pack mob through on 1 wheel. Come through when you're off the injury reserve and shut the parking lot down. Trust me we won't mind

[@adrianorozco1419]

What about a 03 Gsxr 1000?

[@brian636]

Yes sir

[@gottagomoto5468]

Dude I love u seriously. I'm gonna hold u down an kiss u if we ever meet. My stva is out . I just ordered a soldering gun kit. I'm now I can repair my stva get my secondary butters working. My roll on is pretty funky, but u just gave me a ton to play with!!! Plus ya my bike looks great under the tank I thought that, but u just confirmed. I no must dont stunt a gixxer but it's what I have right now. Now if I can just get some good brakes an front forks! Great video!!!!!!

[@brian636]

HAHAHAHHAHA Oh god, love to see you here brother.

[@liamlevasseur1064]

Can Canadians enter?

[@brian636]

Yes sir!

[@liamlevasseur1064]

brian_636 well looks like I’m entering😁

[@f1kaa636]

So cool!! Can I have it?

[@brian636]

If you enter in the giveaway!

[@f1kaa636]

Omg! Wow! Hadn't had a KZbinr that reply!

[@Chris-iy4vr]

Can i get away with not doing this if i dont hold wheelies up for long

[@brian636]

Yes, if you aren't holding 12 o clock wheelies for some distance don't worry about this.

[@elmerhernandez61]

I hope I can win this bike so I can ride with all the riders in my city always wanted to join them but I just can’t afford it

[@osalcedoucmsae]

@Brian_636 Does this method cause any performance/efficiency loss? Mines not fully stock, I have a dynojet and full yoshi exhaust so not sure if disconnecting some of those vacuum lines would have negative effects. If not then I’ll give it a try! Don’t want oil in my air box lol Awesome build series again man!

[@brian636]

No it will not man, just a way to keep oil out of your air box

[@osalcedoucmsae]

Cool, no harm for a daily driver. Thanks for the reply! You’re awesome at getting back to your viewers 👌

[@williambussell8818]

as if i only just found these eps

[@tty3682]

👍

[@brian636]

YOOOO

[@MrBpritch100]

I dunno what the hell but I followed this to a T, piece for piece. And somehow when I stand it up for any length of time I get an absolute TON of oil blow by all the way out the filter! Not just some residual oil I'm talking like oil blowing right out the filter and SMOKING like bastard on the header. 🤷🏼🤦🏼

[@swift__]

🤘🏻🏍😎

[@brian636]

What up Swift!

[@benwilson9658]

1

[@brian636]

You win

[@DudleyRx7]

How the hell KZbin gonna notify me an hour late 😑

[@brian636]

Make sure the bell is on. They have been sucking lately.

[@mikeh.7333]

She's minty 👌😍

[@brian636]

I KNOWWW

[@wookonwheels4218]

If the breather is leaking oil, there’s something wrong with the valve in the breather. Oil shouldn’t be able to flow out of the valve until crankcase pressure exceed the pop off pressure of the valve which is set by the manufacturer. The only way I can understand oil in the intake blowing up a motor is because of the excess carbon over time? But that’s a stretch still. I don’t see the logic in what you’re doing. I would rather have oil in my intake than all over my ignition coils. If your bike is spitting oil, that’s not normal and sounds like a bad breather valve.

[@brian636]

It is for wheelies man... If you aren't holding long 12 o clock wheelies, you have nothing to worry about.

[@gonadiator]

Pretty sure I just blew my 2020 drz motor from not doing this.