I just added the OEM Scrolling LEDS. Switched out the front signals, tested and both worked awesome. Installed the rear signals and then I got hyper flash. Thought maybe putting the incandescent back on the rear and still got hyper flash. Frustrating.
@dinkster_view8432 Жыл бұрын
So I spoke to the guys from Brogue Motorcycles and I needed to add 2 of their resistor kits inline on each bank so my setup is now currently 2 resistor kits on the front signals and 1 kit on the rears and everything works flawlessly with no more hyper flash, will do an update video soon. They told me sometimes the canbus can act funky and that’s why you get hyper flash.
@jasonwilliams6849 Жыл бұрын
@@dinkster_view8432 That’s sweet that you got it to work. I have a 2022 R. I was under the impression that this bike didn’t have a flasher relay. But I checked anyways. Take both seats off, tail fairings and then the black skirt between the battery and the tail area. Sure enough, there is a flasher relay. FE218BH relay hooked up to a wire harness. I was wanting to order the Triumph Flasher Relay but it said it was for older Triple models. Ordered it anyways to see if it will work.
@stevenhsu2336 Жыл бұрын
@Jason Williams any updates on this? I'm doing front and rear as well. If it worked, which flasher relay did you use? Can you specify a part number please? Thanks!
@dinkster_view8432 Жыл бұрын
@@stevenhsu2336 I did an updated video after I spoke to brogue and got it to work with the leds. The STR doesn’t have a flasher relay, I put the link to the resistors I bought in the description, I needed 3 sets. I installed 2 on each side up front and 1 each side in the rear, works just as the incandescents did.
@jasonwilliams6849 Жыл бұрын
@@stevenhsu2336 Yes. I found the flasher relay under the seat and it was the same model relay that they used to use. Eventhough these newer bikes aren’t supposed to have them, mine did. Bought the Triumph LED relay and it works like a charm!