Brother 1034D Serger 11 How to Fix a Broken Thread

[@mudpotter1]

Finally! After 2 days of headache with my "new to me" serger, I found your video that resolved my threading problems. Thank you so very much 😊.

[@TheClayone]

You are SUCH A LIFESAVER!!! I have been away from my server and forgotten this....thank you!!!!

[@Jessica_Valerio]

You are a godsend of a woman. Every machine out there should have such a great bundle of thorough and clear videos as you have created here. =)

[@leisureletter2051]

You are a lifesaver! I was so frustrated on what was wrong with the machine, but thank you so much for walking me through how to fix it.

[@momzilla9491]

This lesson is awesome! I have "just" learned how to thread my machine, after running out of that darn Blue (lower looper) thread. I hadn't come across this video yet. After finally being successful, (had lots of problems with that Lower Looper thread --- not staying put on that "metal clip" that gets pushed back in the machine) the left Needle thread started coming out, again, and again... Go figure? Turned out to be a problem with the spool thread jumping up and down too much. It knocked the spool holder off. Finally I find that the spool of Needle thread is running loose behind my machine! Geez You can't hear it jumping around when the machine is running. So now I know that I don't need to rethread the whole machine again, and again. I need to make sure that the remaining needle thread is pulled out from below the Presser Foot, then pulled directly to the back of the machine, and pull the looper threads are pulled out to the left. Bless you! Thank you so very much!

[@DesantesWorld]

You are an angel! Found your video after 2 1/2 hours of continuously threading my Serger😭

[@MadebyKarenM]

You are a lifesaver I literally was about to throw my whole server away! THANK YOU 🤗

[@karinavillalobos2039]

You just saved my entire weekend! Thank you!

[@chaosandhappiness_Jami]

THANK YOU! I spent 45 minutes trying to fix a lower looper. Didn't realize I need to re-thread as well. Thank you so much for this.

[@freckledcrafts86]

Omg, I had my lower looper break and couldn't rethread it to save my life, was too stubborn to just rethread the whole thing. 2 days later I watch your video, rethread the whole thing and I'm golden. DUH!

[@TgTesh]

Thank you so much. I feel relieved

[@LiL309]

Christ. I was in tears trying to figure out what I was doing wrong. Thank you so, so much!!!!

[@atelier142.creations]

I just bought a used serger and your video came extremely useful, one of the best ones 🎉❤ thanks for sharing

[@kellie1649]

AMAZING - thank you!! I can see this will save a lot of time and have already sent this on to my sewing buddy!

[@heatherhd98]

I’m my gosh. You saved my life. I was going to jump in the river or at least throw the serger into the river. Lol. Thank You so much.

[@TheClayone]

Boy do I know how you feel!!!

[@DesantesWorld]

Same 😂

[@knittysong]

Thank you SO much for this tip. Wish I had known it before tearing half of my hair out......

[@Nerraleehood]

Thank you soooooo much my manual neglected to mention rethreading machine! Save me hours of frustration....

[@glh4883]

THANK YOU!!!!! I couldn't figure out why I was having to rethread all 4 if 1 of the loopers broke. Wonderful tutorial. Thank you so much!

[@fashion_artbyaudrinpeter]

Amazing tip.. it worked on my machine 🔥

[@kimberlydereiter4574]

Thank you so much!!!! Was getting so frustrated when my lower looper kept breaking.

[@belindarickett233]

Thank you so much!

[@stellaezinne4362]

My right needle is touch d lower looper causing it to break Please what should I do

[@stephaniebarnes8118]

Thank you!!!!!!

[@DavidHernandez-rz7qo]

Thank you

[@rillahagley440]

Good evening the arm of my 1034D is not working what can I do

[@RacinRumors]

Watch all 33 episodes, order a serger, watch them again while you wait and you will ask yourself a week after it arrives "WHY did I WAIT SOOO LONG" If you didn't already toss the thread your serger came with you will break some thread. Mine had enough on the loopers to serge about 20 feet of seams.

[@kalarcon5519]

This is a godsend😭 I have punched my surgery machine too many times because of this issue

[@evperez3599]

Thanks!!!

[@Shinestyles4U]

My serger won’t chain I have re threaded I have change needles I have oiled and cleaned out and still won’t re thread 😢😩

[@momzilla9491]

This lesson is awesome! I have "just" learned how to thread my machine, after running out of that darn Blue (lower looper) thread. I hadn't come across this video yet. After finally being successful, (had lots of problems with that Lower Looper thread --- not staying put on that "metal clip" that gets pushed back in the machine) the left Needle thread started coming out, again, and again... Go figure? Turned out to be a problem with the spool thread jumping up and down too much. It knocked the spool holder off. Finally I find that the spool of Needle thread is running loose behind my machine! Geez You can't hear it jumping around when the machine is running. So now I know that I don't need to rethread the whole machine again, and again. I need to make sure that the remaining needle thread is pulled out from below the Presser Foot, then pulled directly to the back of the machine, and pull the looper threads are pulled out to the left. Bless you! Thank you so very much!