Stoeger M3500 Range tests!

We need to see what this new Stoeger likes! We check a variety of 3.5 inch to see what will perform best out of this new M3500!
B.R.O. Merchandise available now at the link below!!
farmfocused.com/bubba-rountre...
/ bubbarountreeoutdoors
Gary Caskey’s Facebook and email is below!
/ gary.d.caskey [e-mail]
Click on the link below to get 10% off of your total order with Marty’s Molds: www.martysarms.com/discount/B...
Enter discount code ‘BRO2020’ for 11% off at Svarog Bullet molds: en.svaroghunt.ru/
/ bubbarountreeoutdoors
Email Mr Bill Kalwas for 3.5, 3 inch and 2.75 inch hulls! [e-mail]
www.thexringusa.com
ckmolds.com
www.bubbarountreeoutdoors.com
www.kicks-ind.com
www.ballisticproducts.com/defa...
leeprecision.com/
www.precisionreloading.com/
www.truglo.com
www.osceolahatco.com/
Positive Impact Motor Sports: positiveimpactmotorsports.com/...

[@johnswanson9591]

Glad to see mrs. Joann getting around

[@l.a.3887]

Great job on the reloads thanks

[@jeffw1246]

Great to hear about handloads. I never use high pressure data. I always select the propellants to the load in any ammo to get lowest pressure. In any shotgun load I try for under 10,000 psi and preferably 9,000 or so. Usually start data from reliable sources seem to match factory specs. Good enough for me. Great vidio. I'll try some 3.5 in someday.

[@Reloader826]

Well Done and as Always a Great Video ... Blessings upon you All ...

[@Jon4784]

Hey Wade great video as always brother good job my friend

[@magicluis145]

I always load 2 shells when testing. That bolt locking back kicks more than the shotgun cycling another shell in to me. Thanks Bubba

[@matthewcornelison4786]

Wade you’re so blessed to have a daughter like Rachel

[@daimyo1959]

Thanks for video

[@USMC-ParrisIsland]

Great job, Wade. How is your wife doing? Hope that she is doing well.

[@jackcarpenterthemortgagema2725]

Another great video Wade.

[@BubbaRountreeOutdoors]

Thanks Jack...

[@richardwhitfield6202]

Great info

[@vernonwilson4762]

Well done wade great job stud

[@charlesdriggers199]

I'm trying to find all these videos to watch. This one proves that with a little but of time and research. You can load a superior shell than factory.

[@fowlmowfboneheadz4395]

I shoot a lot of 3 1/2” buckshot and found that with the kicks buck kicker in full, my Benellis seem to perform the best with remington 3 1/2 00 buck and federal premium 3 1/2 00 buck. Hope this helps in the patterning ventures!

[@lawson9102]

King of buck shot does it again good video

[@johncooper2506]

I need some of those 3.5 single 0

[@sbhcmcc]

I always had great patterns with the 3 inch Winchester supreme, not the high velocity but the regular copper coated 00. I think it’s been discontinued like everything else that works. Great video and keep ‘em coming

[@mot0rhe4d40]

I hear you on that discontinued front. Federal made a 2 3/4" #1 buck load with 20 pellets. Used it to take my first deer many years ago. Really great load that I haven't been able to find a box of in a long time.

[@vapinbachelor289]

@@mot0rhe4d40 also my favorite

[@Graderman3587]

I use the Winchester#4 3&1/2" in My Remington 11-87 super mag with buck kicker full out of 54 pellets at 100 yards it will put 30 pellets in a 18" circle I will add at 100 yards you would hold about 1 ft over the back

[@timselig6527]

Ouch! I think I’ll stick with 2-3/4” and 3”

[@keanmarkgrandapetit79]

exelent

[@jeremyjames1659]

Those Stoegers are the best Turkish autos sold in America.

[@michaelrandell4021]

Ask Mr. Wade Rush for 3 of each, and try his 1 in 9 buck and 69 caliber ball loads. They are awesome on the wild pigs here in Florida to 55 yards. Mr. Rush is the buckshot go to man. Thanks for showing his works. His Russian slug loads are great too.

[@1m2m1m1]

👍👍

[@williamcrawford7982]

Did you add the recoil reducer in the stock ?

[@galenbender2816]

I'm loving the 3 1/2 inch loads. I would like to see some good coyote loads. Something to reach out and touch a coyote in the 75 yard range!

[@BubbaRountreeOutdoors]

here ya go Galen! kzbin.info/www/bejne/gWTdZHWep5yngqs

[@johnwiggins1385]

Wade what did y'all find wrong with that barrel? I've got one of these guns my wife gave me for Christmas in 2015 I've never shot it.

[@sobersportsman]

Waking up to shotguns, country women, all you need is to cook some breakfast and I'll be heading down.

[@robertlandrum1876]

Have you ever tried Carlson's Coyote choke? Had really good patterns with mine.

[@BubbaRountreeOutdoors]

I don't know if i ever shot a Carlson Yote choke!

[@earlprice7200]

Bubba....I have the same Stoeger. Would these rounds be available forsale ??? If so I'd like 50 or so.

[@joearledge1]

hey Sir, I was just curious, where do you find the clear mylar wrap on a roll? All I've found is 1 3/4" 3 mil 2,000 Ft rolls. I'm trying to find other thicknesses and widths and more reasonable lengths like 300 Ft or something like that. thanks, Joe

[@BubbaRountreeOutdoors]

I found some surplus Mylar rolls several years ago! You can't find it like that anymore Joe! I found some Mylar sheets on Amazon that work ok and are fairly cheap! www.amazon.com/Xinart-Stencil-Material-Template-Stencils/dp/B08CC1YNNF/ref=sr_1_7?crid=1KX8U7C1L8SH6&keywords=mylar+sheets+4+mil&qid=1666142352&qu=eyJxc2MiOiIyLjI3IiwicXNhIjoiMi4yMyIsInFzcCI6IjIuMjMifQ%3D%3D&sprefix=Mylar+sheets%2Caps%2C176&sr=8-7

[@joearledge1]

@@BubbaRountreeOutdoors thank you Sir, I appreciate the info!

[@codytaylor2194]

Stoegers my be made in a portion of the benelli factory but its not the same line...also the Stoegers only have the 5 yr warranty and the benelli has a 10 yr...although both will take care of there customers...nothing at all wrong with Stoegers there a great shotgun...but there is is major quality difference between a Stoeger 3000/3500 vs a benelli sbe 2/3...that being said they all kill em just as dead as the rest!

[@travisweldmaster7815]

escorts arnt made to feel like the ol lady...duh lol

[@travisweldmaster7815]

that rig is junk

[@jeremyjames1659]

Then why are they used in shotgun competitions all over America, with good results? You don't know your arse from a hole in the ground.