Bubblebee Lav Mic Accessories Showcase

There are a lot of people interested in lav mics for whatever reason. Many clip the lav directly onto their shirt, a tie or hat but in the film industry, we have to hide them.
Bubblebee Industries makes some of the best accessories to assist sound pros with hiding lav mics on talent and in this video we're going to look at some of them.
0:00 Intro
0:52 Windbubble
4:18 Lav Concealer
7:56 Spares
8:02 Cable Saver
8:50 Lav Micing Case
9:22 Invisible Lav Fur-Outdoors
9:39 Invisible Lav Lav Original
10:07 How to use Invisible Lav
14:59 Invisible Lav Moleskin
15:53 Extra Invisible Lav Solutions
Bubblebee's Website: www.bubblebeeindustries.com
Thank you Trew Audio for loaning us the lavs and transmitters used in the demonstration of these products.
Products Featured In This Video:
WindBubble: geni.us/BBWindbubble
TwinBubble: geni.us/BBTwinbubble
WindBubble 4 pack: geni.us/BBWindbubble4pk
Windbubble AllStars: geni.us/BBAllstars
Mic Accessory Case: geni.us/BBcase
Invisible Lav Original, 30 pack/3 Colors: geni.us/BBoriginal
Invisible Lav Moleskin, 30 pack/3 Colors: geni.us/BBmoleskin
Invisible Lav Fur Outdoors, 30 pack/3 Colors: geni.us/BBfur
Invisible Lav, Big Bag Original: geni.us/BigBagOriginal
Invisible Lav, Big Bag Moleskin: geni.us/BigBagMoleskin
Invisible Lav, Big Bag Fur: geni.us/BigBagFur
Concealer (COS-11): geni.us/ConcealerCOS11
Concealer (MKE-2): geni.us/ConcealerMKE2
Concealer (ME 2-II): geni.us/ConcealerME2ii
Concealer (Rove Lav): geni.us/ConcealerRode
Concealer (4060): geni.us/Concealer4060
Concealer (6060): geni.us/Concealer6060
Concealer (W-Lav Pro): geni.us/ConcealerWLavPro
Invisible Lav Concealer Tape, 120 Pack: geni.us/InvisiLavTape
Concealer Spares: geni.us/BBspares
Cable Savers: geni.us/BBCableSavers
Piece-A-Fur (not featured but I LOVE it): geni.us/BBPieceAFur
Full Disclosure:
Bubblebee Industries sent me these products free of charge to showcase on Sound Speeds and to teach with in real world classes. While this is not a review, I will not present incorrect or biased opinions. Bubblebee has had no say in the production of this video and did not see it prior to release.
Join this channel to get access to perks:
/ @soundspeeds
Gear Commonly Used In My Videos:
Sony ZV-1: geni.us/Sony_ZV1
DJI Pocket 2: geni.us/DJI_Pocket2
Panasonic Lumix FZ-80: geni.us/SoundSpeedsLumixFZ80
Panasonic Lumix DMC-G7: geni.us/SoundSpeedsLumixDMCG7
Aputure Amaran AL-MX LED Video Light: geni.us/AputureLight
Tascam DR-40: geni.us/TascamDR40
Sound Devices MixPre-6: geni.us/SoundDevicesMP6
Please note that some of the links above are affiliate links and if you purchase something using one of these links, you'll pay the same price that you'd find on Amazon if you looked it up yourself but Amazon will pay me a small referral fee for sending you there to make a purchase.
Make sure to subscribe for more content!
Want some Sound Speeds swag? teespring.com/stores/sound-sp...
Have a question? Write it in the comments below or email [e-mail]
Join us on Facebook: / soundspeeds
Follow us on Twitter: / soundspeedsyt
Interested in becoming a patron? / soundspeeds
To make a donation: www.paypal.me/SoundSpeeds
Join my Discord: / discord
All donations received will go directly back into this channel.
If there's something specific you'd like the donation funds to be spent on, please specify in the donation notes or send me an email.

[@charlesisrecording]

I use BBI 99% of the time for the lavs, the wind protection is great! I had to hide 2 lavs in the visors of a convertible, they were driving around 50MPH and it held it's own, the stickies stick to anything that's clean and the concealer is a blessing.

[@SoundSpeeds]

Yeah, they really are solid!

[@Mike0193Azul]

Super helpful thank you very much for the visual guide 💚

[@SoundSpeeds]

Sure thing. Thanks for watching.

[@theearwyrm6105]

Great video, thanks for sharing! I use the concealers quite frequently!

[@SoundSpeeds]

They work well. :-)

[@lindalawson4296]

Thanks, Allen!

[@SoundSpeeds]

Sure thing!

[@dannygarden2292]

Brilliant, some people are definitely going to massively benefit from this.

[@SoundSpeeds]

That's the goal.

[@MrBigbangbuzz]

Lav mounts are the best

[@SoundSpeeds]

The concealers are solid

[@Sophiaa-666]

I’ve never tried their wind protection stuff, but the lav concealer is great. I’m still quite early in my career, still building my kit, so my lavs at the moment are just the rubbish ME2-ii that come with G4s. They’re.. usable, sound okay-ish for the low budget commercial and event coverage type stuff I work on (although I am buying a couple cos11 asap) - but the giant size of the capsule makes it so difficult to hide, and it’s diameter means it doesn’t get enough surface area to reliably stick well in most cases, and they obviously don’t fit in Ursa foamies. I normally just borrow a couple of cos11s or MKE2s from a friend when I can, but now the lav concealers make my own lavs sooooo much easier to work with until I can upgrade. And the tape is brilliant, so far I’ve found it stickier than Rycote stickies, and obviously perfect shape for the lav concealer - but the boxed roll of tape they come in is rubbish. The cardboard box is flimsy, and quite often the squares come off a little too easily and can get stuck to the box at the opening, and just in general it feels much clumsier and fiddly than the sheets of Rycote stickies. I dunno, it’s maybe nitpicking, but it’s just annoying, considering how good the lav concealers themselves are.

[@SoundSpeeds]

I agree about the box of 120 stickies. Normally such boxes go into drawer or another container so you're not looking to store these in the box they come in. To your point though, it is easier to manage in strips of a few than a roll.

[@MrBigbangbuzz]

Keep up the great work ..

[@SoundSpeeds]

Thank you. Will do

[@MrBigbangbuzz]

I love their stuff ..

[@SoundSpeeds]

They make great products

[@nicolasfieldsoundservices]

Echoing what others have said, the Bubblebee mounts are awesome but the precut adhesives don’t perform very well. For COS11 I like Topstick and for DPA 6060/61 I like Superstick (both more or less perfect dimensions for these concealers).

[@SoundSpeeds]

I love Topstick and Superstick too. We're lucky to have so many great solutions to chose from now

[@thepropolys]

Is that the real purpose for the cable saver? I use it to remove/dampen rustling noise from the cable. Works great for that.

[@SoundSpeeds]

It does indeed. Personally, I find it to be more of a hassle when putting on an ankle strap.

[@alisaljic]

The stickers that you took out of that little combo box @9:05, I do not feel comfortable using those stickers. That narrow bridge part of the sticker, just above the little window, the thin/narrow bridge, it does not stick well because of the very small contact surface. That narrow bridge, more often then not, being made out of a thin material that does not hold its shape (like thicker stickers do); with time it just ends up folding in on itself, and sticks to actual self. Which gradually becomes worse and worse as the body moves, and that bridge opens the passage for the wind to start blowing in right where the tip of the Cos11 is located. At times, because I was stuck with what I had on me at the moment; I had no choice but to apply two stickers one over another, but it did not help much. Same problem repeating, sticker folding on itself. I also tried rotating one sticker 180* and matching the window opening with the other sticker to make a lot more contact surface, and it turned out to be working better. But, the whole process just takes too much time fiddling with the stickers, and if I don't stick the two stickers together perfectly in the first try, I have to throw both away and start all over. And when I'm working on an actor who just wont be still when I am doing the sticking, the whole process becomes even harder to pull off. I am not impressed with the design of those stickers. Sticker material should be thicker so it does not bend/fold as easily and ends up sticking to itself. If I had to pick the most annoying and most unreliable lavalier sticker, this one would definitely end up in the top five. Love your videos by the way, great place to learn useful stuff.

[@SoundSpeeds]

Thank you Alis. I've not had your same experience. If I try reusing an original or moleskin it may present challenges the second time but not too much to manage. I understand the quickness factor and if you don't have time to add another piece of tape to strain relief, it can pull out of whack if tugged.

[@alisaljic]

@@SoundSpeeds If the clothes material is thick and does not bend too much, like cotton button up shirt, the sticker tends to work somewhat better. But when you try sticking it on a female dress or a shirt made out of really thin/lite material, that is almost transparent, and somehow stubbornly resistant to adhesives, the sticker becomes unreliable really fast. I basically had to run the wire behind the back and over the shoulder to stop the mic from repeatedly falling down and ending up in the belly button area. But the worse part was the sticker folding in and sticking to itself repeatedly, which caused a major waste of time when trying to reset the lav and fur back to ready-to-apply mode. Cheers.

[@lihterature]

❤

[@SoundSpeeds]

👍

[@rbass_andresronaldodeasis]

Hope you have a distributor here in the Philippines

[@SoundSpeeds]

I'm not sure. Try their website or any pro sound shop you have access to.

[@soundmixervegas]

this is not how you band the concealer to get the mic in. Go 90 degrees

[@SoundSpeeds]

I've done both and they both work.

[@soundmixervegas]

@@SoundSpeeds a lot easier if you band 90 degrees. You find the position you want and just let go.

[@SoundSpeeds]

Going sideways allows it to peak out of the seam but I like the way the cable falls better upright. If the material is thicker, I'll go sideways every time but if it's thinner, I usually like the sound better upright.

[@soundmixervegas]

@@SoundSpeeds I will send you a video.

[@SoundSpeeds]

👍