Budget CB7 Accord Build | JDM F23A VTEC Engine Is In! | NO START ISSUE

[@cheechurb7696]

I just picked up a 95 accord wagon LX from the original owner. The car been garage kept its entire life it’s got the F 22 B2 in it slow as hell. I’ve been looking into h22 swaps. just looking for a community that is still into the Hondas. Keep up the good work.

[@abcthings1122]

aye big bro, going back through your old vids and this shit still rocks. maybe bring it back? its a walkthrough basically but its dope, makes me feel like im there too, plus the way you lay things out might help other people diagnose their stuff too?

[@DrivenFilmsPhotography]

Definitely bro. I'm in the middle of a trans swap for a customer on a cb7 and I'm vlogging every bit of it

[@juanbarolin3278]

Just came over from 79th productions, good stuff man

[@DrivenFilmsPhotography]

Thanks bro! Appreciate you checking it out🙏

[@adamdesjarlais8183]

Slap a bisimoto stg2 cam in it and do a balance shaft delete kit. Balance shaft delete frees up a couple hp on the dyno. The f23 intake also flows really well and a 68mm black works throttle bodys a perfect match for the intake. With all this you'll see 190whp on a dyno jet

[@Cliffjumper]

bisi parts are extinct for f22b1, f23, etc

[@adamdesjarlais8183]

@@Cliffjumper get a delta than

[@Issa_3hunna]

I'm a honda first timer and I am doing this on my 92 ex wagon . Good info... I would like to see a video with the full process rundown for first timers like myself 🔥

[@Issa_3hunna]

What's the easiest way to prep to have it dropped because I can only get the trans mount or either the driver motor mount on but never both at the same time

[@DrivenFilmsPhotography]

You trying to install the engine?

[@Issa_3hunna]

@@DrivenFilmsPhotographyyes ..I cant get it to sit right ...some guys were saying to order the auto to manual mount but o dont see why the manual mount wouldn't do just fine (doing manual swap as well) 92 cb9 EX

[@DrivenFilmsPhotography]

@@Issa_3hunna that's the problem. You have to have the auto to manual mount

[@Cbsaiyan]

LOVING this series

[@rambo_ray1119]

What did you use for your vtec to be able to be used

[@DrivenFilmsPhotography]

You have to run a wire into the ecu pin 4. There's a video of just that on my channel with my other cb7 h swap

[@rj6198]

what motor mounts do we use for f23a into cb7 chassis?

[@Trenchboi69]

What did u do for fuel filter?

[@DrivenFilmsPhotography]

Use the stock filter

[@Trenchboi69]

@@DrivenFilmsPhotography did u have to flip the fuel rail or get a new line for the fuel rail feed on the opposite side?

[@Trenchboi69]

I’m only asking cause I’m doing the same swap rn

[@ryannichols9993]

@@Trenchboi69 I watched another video on this and the guy got a custom 45 in line made to fit

[@shofarofyhvhmusic1793]

Which manual transmission can be used for the f23a engine?

[@DrivenFilmsPhotography]

Any trans from 90-02 4 cylinder

[@4thgenlude397]

Bro how did you get the headers to fit in that cb7 being that the f23a1 is a lot shorter than f22a1

[@jamesclapp3087]

Looking good! I have been wanting a turbo but don’t want to give up my air. Been looking at “air to water” intercooler. Sits where the battery is now. Saves a lot of space bc the water lines are smaller. Basically go from turbo straight to I take.

[@nicolasrmatos]

Hey budd, for the iacv you should visit Rosko racing.com. your gonna need that adapter to use the intake manifold that engine brought. Its what i used to go from 3 wire iacv to the 2 wire iacv. Works great.

[@wipphalo1573]

Ground on thermostat housing ground

[@DrivenFilmsPhotography]

Yea bro

[@timmmayy]

Might be the resitor box you cut out.. mine cd5 is obd2 and i still have a resitor box stock injectors usualy run them if you put aftermarket one that have higher impedance itll problly fire. or if you wire the box back in it might fire.

[@DrivenFilmsPhotography]

The f23a engines come from the 98-01 accords. The didn't have resistor box

[@AJIMPORTS]

A company called 850fab makes killer manifold that allow you to keep you ac and power steering. For the power steering I think you would need the bracket and power steering from the f23 and make a custom hose like we do with the h22 swap.

[@clarencelee7315]

Hey I'm having the same issue with my swap. It's a 98 accord with an f20b. I think I'm going to try swapping my injectors out. Nice build by the way.

[@dantefrierson5797]

Take yo time slow n steady will keep us ready lol lovn videos man keepem comin and what happened 2 that audio build R.A.B✌🏽out

[@raphaelbois2980]

I have a Honda Accord 1998 LX and I have a problem with this thing called limp mode how can I fix it?

[@adamsondergaard8159]

Why does this dude not have more subscribers!? Please tell me!!!!!

[@jemenii3x]

Yo dell you should do a G23 swap on the square body. F20b/h22 head on f22/f23 block would great content an great street car

[@bobross6677]

Man hearing that more of the awesome people are going to Florida is making me consider going back there instead of going to michigan

[@jaysonburns4423]

Man you do some good work...I'd def pay you to paint on my car.....I'm getting a second vehicle this summer and its def gonna be a Honda accord...I've been look for a 1995 modle that has a manual transmission...I'm hoping to find one that dosent run...

[@cardudegarage]

You'll need a usdm fuel rail and injectors the jdm ones are different then the usdm ones

[@heavychevy4443]

79th sent me. cheers 🤙

[@DrivenFilmsPhotography]

Appreciate you checking my channel out fam 🙏🙏

[@royalracingtechroyalracing6128]

Check for engine ground, and where u painted make sure it a good , ground ,,I got the box hooked up to my injectors and car runs fine

[@salscrofano7870]

I think that engine has the crank sensors down by the crank that could be an issue , if your using a different dizzy

[@jamalknowles7903]

I did this swap with a 95 accord. Yes the crank sensor is down on the block but if you use the 94 accord distributor like he did... it has the crank sensor is located in the dizzy so yu can delete the one on the block. Make sure the intake manifold ground is connected that was my problem...it started right up after i found that. Good luck G.

[@salscrofano7870]

@@jamalknowles7903 I just read the title I never even finished the video so yeah that’ll definitely work

[@fortunesk89]

I did a usdm f23/b swap in my ek and I just used a regular style distributor nice to know that those other ones will work along with the crank sensor. Did you convert to 2 wire iacv?

[@VictorRodriguez-bb5ci]

Bro that shit made me flinch too lmao

[@jdmejhatch9391]

Wassup bro just wondering did you take off the butterfly valves on any of your h cars?

[@jdmejhatch9391]

I went from b to h and I’m trynna learn everything I can lol have a h23a hatch has a prelude tranny but I only revs out to like 6k should I chip my p28 or get a s300 appreciate you

[@DrivenFilmsPhotography]

@@jdmejhatch9391 id chip it and get it tuned bro. Itll take 8k all day but make sure the a/f ratio is good

[@jdmejhatch9391]

@@DrivenFilmsPhotography appreciate you bro not a lot of you tubers take the chance to reply 🤘💪🏻

[@JohnKV97]

any plans to go f22a head/f23 block combo?

[@mursetvlogs5717]

Sorry if I missed you saying that, I was skipping around in the vid, but are you planning to turbo this car?

[@turbovtec2408]

How did you switch the oil sending unit for your H23a

[@shyheimbrown8877]

Do a egr valve delete

[@saulpaz1834]

Nice men. I got a F23 from jdm vergina wood u be willing to install it in my 1993 accord? I got ecu obd2 an Wiring harness as well.

[@pilotpvt]

🔥🔥🔥