N54 - FBO To Single Turbo In 4 Days

In this video we install ANOTHER Docrace single kit along with all the other bolt ons for 700+hp.
Note: This is not a DIY ;)
Christians Channel:
bit.ly/MDeclined
Make sure to Like, Comment and Subscribe!!
We have merch! Get it here!
www.teespring.com/stores/budget-bimmers
Need parts for your BMW? Shop where Budget Bimmers shops:
bit.ly/ECStunin... (Affiliate link)
Get your stickers here!
www.Budgetbimm...
Like us on Facebook!
/ budgetbimmers
Follow us on Instagram!
@Budgetbimmers
Follow us on Twitch!
/ budgetgamers
Follow our Twitter!
/ budgetbimmers

[@SpeedComparer]

Nice! I plan on single swapping my N54 tomorrow afternoon between 4 & 5PM heard its a DIY job that you dont even need tools for

[@tommyle538]

Glue ons

[@earnestbunbury2103]

Press fit

[@D_MAGG]

Benji Da Velcro strap ons

[@robertoguzman8273]

Slip on, w one zip tie i heard idk

[@lakers-1]

lego

[@lonniemarks8380]

Either nobody elses camera/mic does the n54 justice or budget bimmers have the best sounding 335s on the planet. Either way these guys have the absolute best 335 content on the internet and the best n54 sounds you will find!

[@LuisGarcia-vs7zd]

Picking up my first n54 powered car next week and im also an exhaust fabricator soooooo... I’m gonna experiment till it sounds like the best one around lol

[@lonniemarks8380]

@@LuisGarcia-vs7zd God help you lol

[@Mountain-Man27]

Luis Garcia what did you settle on?

[@bigdraco3006]

@@LuisGarcia-vs7zd yea g update

[@Mountain-Man27]

Zachary Wright I could give you one in a couple days, I have the exact same setup except upgraded twins. Should sound similar tho

[@thetopclips8622]

Bro I can’t wait for you guys to get big, this shit is hilarious and informative

[@turbosmike2046]

Sweet! Took me almost 3 days to just do inlets, outlets and 3” intercooler piping on my 135i...never again. 😂

[@whosmansisthis1894]

It’s not a FBO lol

[@turbosmike2046]

Ok

[@erickromero010]

Bro open a single turbo install garage. We all need it it for this platform.

[@von...]

37:44 sure hope those zipties didnt get sucked up when yall did some test revs haha

[@Nico_335i_DCT]

Great job guys. 4 days and running, is very fast💪

[@illconformity]

Such a sick car, he gave me a ride not to long ago and it's such a mean car, Yous did great!!

[@otacon4065]

47 minute video! fucking KILLING it content wise! I was literally rewatching your long videos again the other day hoping for another! I will always majorly appreciate as long a video as possible, as with a channel like you guys where you're not fake and have such good banter you kinda never want it to end. I'd legit watch a 2-5 hour raw video of the fuckery/banter between you two haha. nice one and thanks again from the UK. One day I shall have to come out there and buy a beater to skid or summit and crash/donate to you when I leave!

[@joshmindek4840]

You guys should do a meet-up somewhere. I'm in CT and would definitely show up but I'm sure others who are further away would as well. Top notch work!

[@luyanoH]

I just installed this clutch (SST) with jack stands by myself, took me about 16 hours :P. Make sure you replace the Aluminum E18 Bolts if you have them (2007 335i coupe), they will brake if you try to re torque them to 53 f/t. When mounting the trans back taike off the trans mount bracket, it will make it a lot easier to slide the trans into the flywheel ( I had to tilt the trans from the back of it ) !!!!

[@Jaymz87]

Awesome work fellas that's a shit ton of work in 4 days

[@proudeagle2554]

E90 lci M sport is the king

[@CatCreator]

man its so nice of you to help him with his single turbo. so when we upgrading mine?

[@micraw714]

That pimped out 70's music was my fav part 😍

[@MrTheKillZone96]

1) how much was all this upgrading? 2) how much would you charge me to do this to my 2011 335is from NJ?

[@404Trucking]

christian poz dm him on instagram or facebook

[@ltdasilva93]

LOL that intro

[@stoyan4823]

When you were talking about the "time warp" at around 9 minutes, the term you are looking for is a "speed ramp"

[@paulpateman3968]

Fantastic video you guys are BMW gurus 4 days to do all that work amazing 😉

[@CapeVoice]

YOOU BETCHA GOONA POOT THE TUR-BOH ON THAT CAAR BUDDAY.

[@godla26]

You guys are the best. Always having good time watching man. I am jealous of Canadian brother. I am thinking about same setup but mine n54 is XI. Please can you guys make me a list of all the parts I need to build setup like in this video? You guys are the best 100% real DIY guys . I would love to hang out with u guys one day man. You guys are Mintttt.

[@jacobpoole9366]

Following

[@JMD535]

Dude,..if you ever get a proper shop,...you're going to be doing quite well! Keep doing the damn thing!

[@mjaay3715]

dope vid... should've split it in 2 videos so your channel can keep pouring out the content. keep up the good work fellas

[@Krummelz]

19:30 Best music right there.

[@adrianpedzich4989]

VengaBoys - boom boom boom

[@123456bmx]

37:47 is the part where they cut out the scene where the turbo ate the zipties sitting inches away from the impeller

[@BudgetBimmers]

Lmao

[@TheCowgirlNiamh]

That's insane lol nice work! Not something I'd ever do but it's fun to watch ☺️👍👍

[@Mikeg1617]

How much is this setup I'm interested in the same kit for my 335i. I'm in boston.. let me kno if I can pay you for the install

[@dbnpoldermans4120]

I will drive all the way from the Netherlands to get a single.

[@xZiMinDaveyy]

Pure turbos in bels helpt je ook wel

[@QuadDoc]

AWESOME WORK GUYS!!!! Hey... What Diagnostic app tool are you using for live boost info toward the end??

[@tysurakus1975]

3:00 10 thousand dollars later

[@Matty7x]

its around 15k to do everything the way they did

[@AquaStevae]

@@Matty7x Nothing budget about that...

[@kevinreinhartshuber1074]

@@AquaStevae its not about budget. the content they are creating is superior to every other youtuber out there. they should call themselves premium bimmers.

[@ali_ing069]

@@Matty7x 15 stop smoking it's about 5k 4k or 3k no more

[@bmv5813]

Great job guys !!!

[@1stock_ttrs]

Saw this car at mpac sounds soo good

[@csmitas]

Thanks!! Mpact was a lot of fun!

[@goldenratio183]

so sick nice build!

[@rigobertoperez4924]

Nice project congratulations

[@pimnmike]

Reppin that HP Logic

[@Rdallday]

@38:57 let’s see him stall it. “What?” Pull it out. 😂😂

[@alimehrozi2828]

Hey guys how much does it cost for a good shop in parts and labor to do a single turbo N54? I'd do the labor myself but I neither have the space or time

[@ltdasilva93]

That's why we were born with two kidneys my son.

[@chriscross7368]

About 5-6k

[@heatchamps2011]

U will spend 10 k . Around there . Everything done

[@alimehrozi2828]

@@heatchamps2011 the doc kit alone is 5k so with all the other supporting mods it's probably at least 10k alone in parts, I have no idea how much the labor would be

[@alcantarainterior8078]

I’m stoke for you guys nice work! That car hauls ass

[@picklemetimbers3003]

I wish this video was longer. I had an hour break. WTF am I supposed to do for 12 mins?

[@heatchamps2011]

I swear the street exhuast sounds so good single turbo. Oem its quiet af.

[@mattcarafa210]

That turbo is fucking monstrous, was that a n54 twin turbo before? I just got a n55 335xi and blew up the stock charge pipe (noob) did the stage 1 mhd, I'm kinda nervous cause I can't find o ring and hope it didn't get sucked up throttle body, new pipe should be here in a few days hoping to find o ring when I drop the engine tray. Sick what you guys did to this car.

[@justjoshn5468]

Boom boom boom boom.. I want you in my room! Love that song

[@MasterCarguy44-pk2dq]

Only problem with is after extensive tuning it'll be over $12k. And internals need to be done if your over 550whp.

[@idratherbesurfing2075]

That clutch SuCkS to drive at first.

[@romeosalas8211]

Favorite Bimmer bro’s 👌🏼

[@friguy4444]

I think DA BOYS have been watch some "ZIP TIES N PIAS PLIES". LOL. "MINT", "PUT ER IN THE KETCHUP", "REV ER UP N DUMP ER". But I guess as another Canadian watching other Canadians go to USA as a Canadian makes almost all Canadian Content. EH?

[@bigextra4me]

Lol it took me 27 days to do mine in the evening by myself. I'm too picky

[@Simo135ie82]

Great job!!!! Wow!! Did you use a specific map after installing everything?

[@electro_mutt8692]

Simone Lorenzo In the video he mentions that the JB4 is on map 1

[@NZcarBlog]

did you guys install a LSD yet?

[@Princess4bby]

Your from RI WTF?! dope I just bought my e92 335 can’t wait to start modding it 😩😩

[@MrSkarbek36]

Chlamydia Boi jus bought my e92 335 in all black last Saturday! such fun cars

[@LexicalNoScope]

It seems there’s not a lot of people going 64+ on this car. I saw doc race offers a 67 and a 68 but can’t find anyone who’s actually installed one. Would it just be way too much lag?

[@youknowimwhite]

There's a few out there, but I don't think anyone is maxing out the 6466

[@BIGGEST786]

Smashed it boys well done but 1 question please I need like This but automatic please any help e90! Lci!!!

[@Willabeast]

HEY LISTEN HERE ITS BEEN 4 WEEKS ISNCE U UPLOADED IM NOT ABOUT TO WATCH U GUYS DIE OUT KEEP GOING KEEP TRYING!!!!!

[@drew2540]

sick, ill roll down from canada to get wild on mine. get it mint

[@allstat1290]

As far as the n54 goes and single turbo, what’s your thoughts on the 535i? The 2007-2010 have the same n54 as the e9X correct?

[@bobanmalware]

God I love that intro 🤤

[@stephenpman]

Wish I could do this to my 750i....

[@johanalzate1927]

How is this video only 2100 likes? Shows how hateful and fake people are... great work brother!!!

[@Radeck07]

Could you test Holset HX40 twin scroll setup?

[@jeffnixon4534]

You guys are the shit, at 19:50 I heard vengaboys in the background

[@nicholasseetaram8927]

Where r u guys located i saw that HPlogic shirt and was like oh wat

[@kvssilly5415]

Hey bros I have a 2007 335i coupe, N54. I'm turning this buld to be strictly drift missile. Cant seem to finde an angle kit for this car, any advise??

[@exzackt]

What types of lifts were those you used to jack the car? Also can I bring you out to Reno to help do mine? I got you on a room downtown! Haha

[@BudgetBimmers]

bit.ly/Quickjack

[@djjarrard2424]

We’re stuck at a point where we need to relocate the coolant reservoir. Any advice?

[@thepredator4480]

Dont want to look through 200+ comments lol. What exhaust is on the bmw in the start of the video? Mine has to sound like that!!!

[@Just_Jeff_89]

Hey guys I am building a n54 currently. I am looking for a complete part list of everything I need to do this build. I am going to be building an auto with paddle Shift though is only difference. There is a shop near me that’s cracked the code and builds a killer auto for the n54 that picks up serious time compared to manual. Can anyone link me to a full build list?

[@1lincolne]

Good job

[@robertb105]

Wanna single turbo my car next? And why do you look like beetle juice?

[@colin6473]

yeah.. then mine too. thanks

[@earnestbunbury2103]

It's the receding hairline ...

[@holeshot895]

Nice work. What tune are you running in the video? Your friend in the Toronto or Ottawa Area?

[@csmitas]

tune during the first drive/break in was an OTS map - the clips at the end and beginning were on a tune by Ken Atkinson from Wedge

[@Donats91]

Brad Irons what area of the GTA. I’m in caledon. Gonna keep my eyes peeled for this car. Won’t race it though ;)

[@holeshot895]

I'm up in the Ottawa Area, building an N54. In the process of a motor swap and Pure 600's.

[@hiboost2453]

12:07 dat fart

[@iPodgeek44]

Awesome

[@thatspacegreyf1032]

Can i buy the stock twins?

[@captinmosaly6]

what exhaust does he have on the car?

[@csmitas]

its a vrsf 3.5 inch street exhaust :)

[@chrisbmw30]

can you link the pcv setup(fittings/etc)? also, how is the car holding up?

[@csmitas]

vargasturbo.com/product/vtt-modular-pcv-catch-can-ready-to-install-kits/ - car is good, stored for the winter and waiting for spring!

[@Slowafc]

Link to the ntk o2s please!

[@csmitas]

www.amazon.com/gp/product/B001UCF4UI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@ahnima00]

Great vid, but please wear eye protection while under the car, chunks and particles tend to fall off extremely easily

You can please write or link all parts that I need for same uprage..

[@zachcass8071]

Hey guys I’m from Ontario as well. Looking to turbo my 335I. Could you guys help me with that

[@lolzpoop]

do you have all the parts listed anywhere, looking to do the same

[@jankrnac9211]

Hi. Are additional fuel injectors additionally installed in this modification? Or is it only powerful with direct injection?

[@csmitas]

yes - for full E85 we installed a BMP port injection kit that has bosch 750cc injectors.

[@MakeItRayne]

Do you have a link for that vargas pcv kit?

[@mmo45]

Can you post a link or part number for the NTK oxygen sensors you guys used in the build?

[@csmitas]

www.amazon.com/gp/product/B001UCF4UI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

[@mmo45]

@@csmitas Awesome, thank you!

[@thebestsoccer2063]

can i hit the red line on stock internals on n54?

[@vafangul5716]

What state are you guys in?

[@earnestbunbury2103]

Big Budget Bimmers...

[@Faustastico7]

I wish I could afford a single turbo for my e90 lol

[@alex_ag7022]

Faustastic2 at least ypu can afford an e90 lol

[@carlosvaldez236]

You can with PayPal.

[@2052lt]

GJ Boyz !!

[@RemyNamvar-CK-RT]

How much did it all cost?

[@christophersparkman]

Sooooooo can I drive my e61 over your way to have the same thing done to my N54, too??? Lol #But4RealTho 🙏

[@calebjones7769]

What management?

[@goldenratio183]

Can we get a new upload for the brooosss

[@cameronnedza3585]

i fucking love you guys

[@badboygto]

oil filler cap looks abit burried in the engine cover

[@dougnbodie]

Just wondering if this can be done to the M57 Diesel

[@KeevSykes]

The engine wouldn't withstand that much pressure. N54 was literally made for this.

[@bigmarcb]

Will this work for a 328i ?

[@nestorvelasquez3652]

You guys should install my single turbo kit 🌚❤️

[@boostedwithshane4038]

Mannn how much would I have to pay you guys to install ps2 on mines I’m in the Bronx ny

[@kweezish]

my man needs to ditch those halogen headlights

[@dirk3142]

What is this song at the end of the video

[@davidakaz2196]

How much is all that worth ?? The turbo and everything??

[@curtmosca1654]

Over 12k