E46 Welded Diff!!

[@boostedone1367]

"WHO THE FUCK IS CALLING ME RIGHT NOW" Laughed so hard 😂

[@PlaywiithMee]

did i just watch 14 sedconds of black screen ?

[@dmmotors2024]

No bro

[@Uberlight2]

LMAO that's what happens when you don't torque your subframe down hahahahaha

[@thenotoriousflip4275]

the part where you were actually dropping the diff was the epitome of all do it yourself struggles. "were gonna use the jack cause its safer" **discards jack cause its not working and starts to struggle with it.

[@bubsiesiegel]

I give a 10/10 on that fart at 13:00

[@joseabelmaldonado938]

Ronald Raygun problema con Jeep Liberty 2003 con con el sistema de aceleramiento

[@youdontlivelongcuhh]

The bimmer community needs more Videos & more "who the fuck is calling me"'

[@bassboosted_rdz2269]

lmfao for real!!!

[@Philociraptor]

Siiickk! Maybe when you bolted up the rear subframe it might have been slightly crooked causing it to "dog trail" or the back end to want to walk out a certain direction so the steering wheel is constantly turned in one direction to compensate. I don't know.

[@gnicevids]

The e46 is till my favorite bmw it connects you well to the chassis, transmission and suspension

[@mcintosh.motors]

Please do more videos on the E46, I'm about to buy one and would love to see what you guys are doing next on the car.

[@joshr213]

Did you get it? And did you get the m3 version?

[@JDCALDECOTT]

Only recently found your channel, love how you just swear and chat, it’s just like real life wrenching 😂

[@BimmerTV]

Those were some quality donuts son! Nice job tackling this project mostly solo as well!

[@Luis-ee2sl]

The editing when you lowered the diff had me dying hahaha

[@sneakerandthedryer]

Another great vid guys! Lots of lulz! The dance off, blurred out diff humping, torquing the sub frame bit, excellent. Keep em coming!

[@EpsilonBiatch]

Never thought my e46 would look so attractive doing such drifts.

[@MechaniclifeJDM]

The ABS and traction control are like WT-ACTUAL-F!

[@julian-H47]

4:30 tourretts😂😂

[@legodude5556]

This was 4 years ago but anyways put a flathead in the caliper and rotor to hold it the axle for the bolts

[@squizy]

im just coming back every year for this video love this shit never gettin tired of this be back boys

[@Zazu.325]

“Who tf is calling me rn” ME ASF 😂😂 E46 gang 👌🏽

[@savag3jok3r81]

One video I watched of yours had me in tears and I learnt to have a extra dude when I drop my diff. Had it all fucks farts and a little bit of slag...sold 👍

[@kolehobbs9336]

I liked just because I love the cussing and all of the mechanic energy

[@howtonewb]

PLEASE PLEASE DO A TUTORIAL TO CONVERT THE E46 TO E85 FLEXFUEL. TRYING TO GET MY CHANNEL INTO THE E46 SCENE! HOPE TO SEE YOU AT A MEET! LOVE FROM SEATTLE!!!!!

[@shakethaspot6301]

Rip to the caster wheels on the mechanic kart you rolled on 😂😂

[@TheMusta18]

21:09 that smile after drifting

[@gnicevids]

He pulled that diff out and started breathing like he had a baby lol

[@julian-H47]

1:24 damn 😂😂 anger issues

[@giantsboy1000]

8:28-8:33 #CAMBERGANG

[@tomasvinkler6476]

:DDD

[@mr.kawasaki350]

What did you with your exhaust ? That sound is really dope man ! Greetings from Germany 🤙

[@modsandmissiles3344]

Need to put a wet rag over the ring gear to keep slag out of it

[@pikachu123og]

this reminds me why e46 is a must

[@mattyfreshification]

So use brake clean on something you're going to weld and not on a mating surface you're going to put RTV on? Full mental, love it

[@alexmartinez280]

How much a lift like that cost? I need one ASAP! Tired of all the jacking on my lowered M3.

[@Problematicars]

What do u torque the diff bracket/brace to my alignment it off too

[@brayanmoran6439]

who the fuck is calling me right now! Oh hi mom :)

[@e85johnson68]

Budget Bimmers -- Great videos!

[@ohmav6383]

what bmw is that, amazing video btw gonna get mine next year just wanting some advice on a good price and milage to look for on them

[@finnice]

Haha I gave thumbs up just for that dancing interlude 👌🏻✌🏻

[@danlawrence9051]

Every time the phone rings 🤣🤣

[@zuidkb7312]

Which headlights/daytime running lights do u have installed?

[@benoite8550]

cool bro, but on my German e46 when I push the dsc button and hold it for about a century, it turns the dsc off together with the traction control so I could skate on the round a bout, isnt that the same as a locked diff then? cuz if I just turn off the dsc I cant

[@robchapman1162]

Hey bro what's the torque specs for the rear subframe had to put a clutch in my car and before I have a chance to wonder what is swaying in my car thanks to your video I remember to torque the rear subframe

[@mousey7789]

Hi does your abs still work? I know about disabling the dsc but I'm trying to find out if the abs actually causes an issue.

[@daddypoe484]

The abs still activates

[@Adrianlovesmusic]

21:55 your trunk does lock too? WHAT'S UP WITH THAT. Always it was me after filling it up with 2 bodies in there

[@hyimlinsilohan]

Well not that is relevant anymore, but the steering wheel being off after welding is probably because of uneven tyre size(uneven wear). Sure can be any other reason but before taking it to a shop to do an alignment just toss a new pair of tires on. also if you liked doing one wheel peels - explains the uneven wear.

[@caliautomotive6894]

I hope it’s that my e36 is doing the same thing one of my tires are uneven

[@caliautomotive6894]

Of thread the left has more thread than right

[@ricardoyanez754]

Stock diff or whats the specs on pinion and gear? I have an 05 325i i wanna try this on

[@caliautomotive6894]

My e36 steering wheel turned weird after I installed welded diff anyone know what it is

[@SpencerKyleMarfurt]

What size are those wheels? and what the Style number/ Model there off??????

[@bmwguru6611]

Guys when u weld the diff will the abs and dsc light come out on the cluster or nthin to do with that

[@younginfamou6053]

Lol, "who the FUCK is calling me right now" haha dead

[@sttm1283]

besides drawing two lines instead of one, when doing a burnout. are there any really good benefits of welding a diff? i myself have a way to new bimmer to do shit on(F30 335 stage 2 tuned). but im looking to get a project or something that i can play around with

[@BudgetBimmers]

Micke it's only good for if you want to drift, that's the only good thing about it

[@christophermahon8392]

Use one of those earth magnets at harbor freight they work great

[@elvinvalette9928]

Let's hope that subframe is reinforced. I ripped my mounts right out and had to get the whole thing reinforced.

[@BudgetBimmers]

Hugh Janus she's been through so much in the last two years and it hasn't ripped so I think it's pretty stabile. When we had the subframe out to do the bushings we killed any rust in the bolt holes and any surface rust so she should be good, but hey if it rips.. more content^_^

[@e46alex30]

I’m gonna make the “ WHO THE FUCK IS CALLING ME ?” As my ringtone

[@austinwhite1298]

Lmao love the way you voiced the video man . Pulling the diff out of my 328i this weekend and getting it welded

[@matinbani]

U do that on stock bushings?

[@enriqueshockwave]

Loved the donuts at the end

[@alexeisenhardt9299]

Am I the only one who closes my eyes when he welds

[@TheRenny1000]

Every welded diff vid ive seen so far they just weld it on the car 😅

[@canadianracecarguy7038]

Thats an even bigger pain in the ass than pulling it on these cars

[@earlleejustinergs8]

Took all the bolts off when i was working on mine, it was only a matter of pulling it out and welding it but for some reason the diff and the drive shaft got stuck together. Any advice on how to go through with that?

[@finnice]

LJ Rigos you've probably resolved it by now but this happened to me and it was small bits of weld slag in the dry bearings... I sloshed some diesel around in my diff and brushed it with a wire brush then poured it out and blew it with a air gun and then oiled all 3 bearings and forced it to move with two bolts in the input flange and a pry bar, it was good after that 👌🏻

[@abuhajebmotorsports4683]

Now do this to the E92 ;)

[@KP0117]

You guys going to the BIMMER car show this Sunday in Long Island?

[@TheTrueArix]

Hey nice video, did you have any technical problems? I heard that the dsc and abs will fail when you weld it. Or is everything normal?

[@jostonepsu]

Hi ! How many time for just replace the diff ?

[@jkperformance6785]

What for axles are you using ? I break mine in about 3 seconds lol

[@grytbakk1]

What engine does this beast have?

[@bryanemperador2248]

What’s your exhaust setup lemme know bro shit sounds dope

[@chad_ryann]

10:54 had me dyin lol ".... but fuuck it"

[@marqueswaswhite7603]

Can I put a 330i in a 323ci coupe ?

[@Skaterforlife13579]

I have had a welded diff for 5 years and the reason your steering is off is because your tires are two different heights or one is more worn than the other in the rear and even the slightest height difference will throw off your steering

[@Jabbaz03]

but if it is in the rear why would that affect steering when steering is in the front?

[@heatedcr]

Because when you have a locked diff the rear wheels can no longer spin freely from one another. Normallty when the wheels vary in diameter then the diff allows them to spin at slightly different rates, giving your car an equal and straight acceleration forward. However, since that's no longer possible, the wheels will be forced to spin at the same rate regardless of their diameter... resulting in one of your rear wheels either dragging behind (as if you had breaks on just one wheel) or driving forward in respect to the other rear wheel. This should go away over time though... the only reason the wheels were different in the first place is from not having the locked diff. The wheels will eventually grind each other down until they are relatively the same and so you should see your steering wheel straightening out over time. If you don't, then you might have a more serious problem.

[@Jabbaz03]

i get what you are saying but as far as i can tell that would not have been the case since he does not have two different wheel diametres? or does he?

[@caliautomotive6894]

I installed welded diff on my e36 and my steering wheel is turning left pretty hard it’s annoying I hope it’s that what your saying the height difference

[@NoGripGarage]

Did you use a torque wrench and torque to specification? because the wheel diameter in the rear would not cause your steering wheel to be like that. he is trying to talk about alignment issues.

[@WotanBarnes]

What exhaust setup do you have in there? Sounds pretty awesome.

[@BudgetBimmers]

Wotan Barnes eBay headers, random sport muffler found in front yard, stock resonators

[@WotanBarnes]

Budget Bimmers thank you very much

[@jakestevens656]

Is this do’able on a 09 328i. I really wanna know

[@nikolasdamas316]

Hi from greece.!! This problem with the stering wheel is hapens because the rear tyre push too much together and transfer the force in front wheel .this is the reason for your problem with steering wheel.for give me for my english .... i hope too help you .!!

[@shakethaspot6301]

Christians weld helmet looks like the old navy diving helmet 🤔 1950 called, its for you!

[@gionatanconvertino4321]

The dream of a bad boy... Good job 😍

[@MannyLokstahh]

Sick wheelies guys.... uh, errrr, I means donuts 🤘🏽

[@dizzy83]

Nice vid bro. I love the e46 never selling mines

[@gnicevids]

I'm not going to lie but that was some really good donuts. Nice job. You need to probaby tighten the bolts on the on either the subframe or some were on the diff area. If it loos like the back will not point straight you you front end will have to compensate

[@atomik_squirrel2393]

I've been trying to find info on this subject and have been unsuccessful. Do you guys know the hp limits on e85 for the stock n54 hpfp?

[@209xKiiNG]

Atomik_Squirrel23 my daily is at 420hp 370 tq on oem pump. I would say maybe 500

[@DreckigeDreizehn]

N54 is shit

[@SydeshowMO]

Hey bro... is that your phone ringing?

[@heinzforster791]

330i ? What exhaust?

[@chrisianglenn4404]

Haven’t subscribed to anyone in years

[@oceancity5776]

I hear a rattle from my center console when I hit a bump in e60 535i xdrive. WTF is it?

[@Bugzbunnykid]

Fuck I actually hear people complain about rattle for n54 engines. I forgot what it is. But just search n54 rattle noise

[@channelbrown7309]

Exhaust hitting something? Transmission or the bottom of the car.

[@megamaury23]

i have the same thing now but i found out it was a part of my exhaust hitting the v bar on the rear.

[@kenfrazier64]

you guys made my day

[@rowa7270]

the axis angle between chassi isn't good .but the custom things you can do that only in america - i like people that show's the process.come to Berlin and go out offffff range let is say like a invitation to see how people have fun

[@ziadajam5433]

Damn nice vid. Now I just need to convince my dad to let me get a drift car

[@letoulhs5317]

Whats the difference between welded and open diff?

[@el4809]

Happydee welded diff both the wheels spin the same direction open just one wheel spins but if you have money to spare buy a LSD

[@bigmikey5775]

immediately left a like when u were just like “who the FUCK is calling me “

[@gordon8779]

okay but wtf is that exhaust set up i need that asap

[@kenneson13]

just subbed, where has this channel been all my life, funny as fuck

[@brettgainfort3121]

You guys are the funniest fuckers ever! Keep it up boyz !

[@jd7896]

LOL I fucking love the editing man, hilarious shit. I got a '00 328i that I'm finally almost done mechanically restoring, might start a video series on it once I get to the good shit. Is yours steel blue too? Looks like it

[@donaldmuir9475]

What's done with exhaust I have a 05 325i and want it to sound like that lol

[@lesukable]

straight pipe it and leave the back box ive done that to my 325i sounds mental and if you want it to shoot small flames get full straight pipe

[@DanielJames97]

If you want mad noise out of a m54 get the muffler deleted and the first cat leave the 2nd one in, cracks like a whip no matter what gear you're in

[@notreal6025]

What for exhaust??

[@ethanwahlgren632]

First time watchin ur videos. I subscribed immediately after "who the fuck is callin me" lmao dude ur awesome. U say fuck so much n i love it. When u took the diff out i was cryin from laughin so hard n its 1am whole house is asleep

[@Jack-dg1iv]

Inbetween an e46 or a Lexus is200

[@steveh2040]

bruh you sound like my long lost twin, subscribed

[@robchapman1162]

Hey guys! what programmer chip do you use on your E46

[@BudgetBimmers]

Rob Chapman Kassel performance euro2 tuned dme

[@209xKiiNG]

Anyone know if the traction light/dsc are always on after the installing a welded diff?

[@BudgetBimmers]

Carlos Mejia negative

[@ronanverso]

I was wondering that as well

[@rowa7270]

push the button once and the dsct and dtc is limited...when push the button longer its all off...in example to the old cars without xdrive

[@rowa7270]

its less when you turn the assistant off.. i do drifts with a cab...but no lock diff

[@DanielJames97]

Traction control light comes on permanently if you have a faulty speed sensor or a popped fuse could always just pop the fuse for traction control then no worries about it interfering

[@pedrogadea4926]

Ha ha, nice video. Great to see other guys getting greasy and dirty. Well, that didn't come out right. Great skills, great music. The dancing needs some work though. And shoot, your creeper wheels look like you both have been lying on it. Whatever floats your boat. Keep on wrenching!

[@leemurphy5253]

Are you going to do anything else to this car?

[@BudgetBimmers]

Lee Murphy yes! So much planned for this thing, new video on the e46 dropping on Friday!

[@leemurphy5253]

Budget Bimmers finally love the 330i it’s so clean