BUGGMAN 2004+ Ford Ranger Gauge Cluster & HVAC Panel RGB LED conversion & disassembly

[@kodysemke3672]

awesome ! love it !

[@AceBoy2099]

You skipped the important part of needle removal, still watching the video, so we'll see if you cover reinstallation and alignment.

[@buggmanmods]

Removing the needles isn't that difficult so I left that part out. I normally use a fork or thin pry tool to remove the needles from the gauges. I let the end user reset their needles once installed in their trucks so they can set them correctly... I recommend putting masking tape on the gauge overlays under each needle, turn the key on & let the needles go to their "start" position, mark both sides of the needles with a fine sharpie marker, Once you have the mod completed, set the needles back in between those marks when the key is on. This might not be 100% perfect, but it'll get you close enough where you can use your GPS to set exact speed.turn the key on & let the needles go to their "start" position

[@qsjuggaloqs]

First! 😏