Buick Grand National Engine and Transmission are back together!

[@superbrowndudenational_trx]

Always love the videos bro, keep them coming!

[@ericspurlock7775]

Good video can't wait to see the finished product good luck.

[@VenomGT87]

Thank you! I am really trying to step up the quality.

[@SkilsawDoctor]

Without a doubt, the baddest of the BAD-ASS ! Biggest mistake I ever made was selling mine. Lots of luck!

[@2muchBoost_]

I was going to get a set of Champion aluminum heads but they never came in, so i bought the T/A performance aluminum heads....nice build

[@brianmathew09]

do you get the SI or SE's? what rockers did you go with? thanks

[@2muchBoost_]

@@brianmathew09 SI ported by DLS with 1.65 rockers

[@davidl16]

Great videos always! Do you happen to have the part number of the flywheel you used? 😎

[@VenomGT87]

I was just under the car looking to see if I could see a part number on it but it is too far up to read the stamp.

[@davidl16]

@@VenomGT87 Damn ok thanks

[@bigs650]

Good stuff, I had a problem with clearance and that cat flywheel with my trans

[@brianmathew09]

i didn't see the vid of what was done to the engine..assuming Andersons build?

[@VenomGT87]

I went over it a little over a year ago but its an entire FTS stroker kit, 210/215 cam and GN1 aluminum heads.

[@brianmathew09]

@@VenomGT87 should be speedy..why the GN1 vs TA's ? Heads are my next upgrade. I recall Bison saying champion/GN1, have better seat material?

[@VenomGT87]

I won the heads on a “waffle” so didnt have a choice but the TA’s seem beefier.

[@lwilliam22]

I had the same problem with my gn1 heads too. Had to tap the holes the rest of the way out.

[@EluderRacing]

enjoy all your videos lots of great info. I have been looking for a video on installing a oil catch can and haven't found any. is everyone still just caping pcv valve and adding breather filters to both valve covers?

[@VenomGT87]

Here is one I uploaded a while ago. kzbin.info/www/bejne/f5bNkoZjms1kgcU

[@superbrowndudenational_trx]

Hey what's that part number 🤣

[@rle1020]

What converter is that a 9x11? I’m surprised your not running a 9.5 converter.

[@VenomGT87]

9/11 because I drive it a lot. I have a 9” on the ‘86 and hate it...lol (yes I know I am leaving some ET on the table)

[@lowbodyfat6707]

Looks like you finally put the good stuff on that sucker, I’ve been watching your channel for a while and with your knowledge, there is no way you you shouldn’t have a Gn that can go bottom 10’s in the mid 130’s, that can be driven to the track with A/C on.

[@cognitivedissonance7539]

Hey man, been watching your vids for a minute and now I see your living close by in MD. I'm in the process of dropping the trans out of my 87 GN and getting Husek to set it up. Trying to find other people in the area that know turbo Buicks has been NIL. Be cool to compare notes sometime. I'm an hour North of Cumberland.

[@VenomGT87]

Cumberland is a little ways away (2.5 hours) I am 10 minutes away from Cecil County Dragway in Rising Sun, MD. Hit me up on FB or IG messenger.

[@cognitivedissonance7539]

@@VenomGT87 Did the drag strip down the street affect the relocation? Sounds like a road trip.

[@VenomGT87]

Just lucky to find a piece of land so conveniently located 😂

[@MotoBodega]

You dont use loctite on the flywheel bolts

[@VenomGT87]

I did.

[@chrisstinson451]

is that a 109 block ? if not where did you tap for turbo oil drian

[@VenomGT87]

Its a 109, stock location.

[@GTOPontiac1968]

Looks like it's missing lifters...

[@VenomGT87]

Yeah, this “friend” of mine wont come drop them off...😂

[@GTOPontiac1968]

@@VenomGT87 I heard your dog doesn't like that friend

[@samanthaherrera5556]

What size of bolts are for the transmission 3/8 -16 ARP?

[@donpratt9872]

can u tell me ware u got ur tourq converter

[@VenomGT87]

Anderson Performance in Queenstown MD.

[@tristanbrendon9620]

Lovely 😍💋 💝💖❤️