A subscriber mentioned that I have enough spare parts laying around, that I could build a bike from scratch. Well, let’s see if he was right. Fun project for a rainy afternoon. #HondaCT70 #Lifan #IceBear #125cc
Пікірлер: 53
@marioruiz53132 жыл бұрын
My wife asked me what important thing I had to do this morning and I answered her... I have to watch a video of my friend Mike assembling a CT70 😆👏👏👏 I really liked it Mike, nice job 👌
@MiniBikeMike2 жыл бұрын
Thanks Mario!
@davidjackson46452 жыл бұрын
Hey my old frame. Glad to see it lives on! Great video
@MiniBikeMike2 жыл бұрын
Thanks!
@davidjackson46452 жыл бұрын
@@MiniBikeMike of course we wanna come visit again sometime!!
@MiniBikeMike2 жыл бұрын
@@davidjackson4645 I’ve retired “again”, come down any time.
@davidjackson46452 жыл бұрын
@@MiniBikeMike haha awesome I’ll text you soon to set something up!
@bartgoins178211 ай бұрын
Very impressive to have that many spares, and the knowledge to do a build from the ground up. Great job!
@MiniBikeMike11 ай бұрын
Thanks. I’ve been hoarding parts and building little Hondas for a very long time.
@bartgoins178211 ай бұрын
Yeah, I wish I had got into it long ago. Now locally, everyone wants an arm and a leg for the smallest of parts. I may have to take a trip down to California in the spring time for the Pomona Swap Meet.
@thomaspencak58112 жыл бұрын
Absolutely fantastic video Mike. You have an amazingly organized tool and spare parts system there. Let us know what the Ω ohms readings are on all those stators. That can confirm which ones are bad! Then we can know how to check ours if we suspect a bad one. Thanks again for the great videos.
@gerardkenny84082 жыл бұрын
Looks awesome
@MiniBikeMike2 жыл бұрын
Thanks!
@geoffreyjones20002 жыл бұрын
Raining in Maryland too, sir
@MiniBikeMike2 жыл бұрын
I’m over it, c’mon summer. It’s suppose to rain all day tomorrow also.
@franciscoolvera68712 жыл бұрын
That was fast!!
@MiniBikeMike2 жыл бұрын
It goes pretty quick when you don’t take the time to clean up any parts. 😂
@brianlapointe53042 жыл бұрын
Great job mike, yep I knew you could do it. Great little cruiser there. Hey it’s something to cruise around on, I like it. Super build as always.
@cainbeeping8480 Жыл бұрын
Good job brother thanks for sharing.
@dirtcopdualsport2 жыл бұрын
All i need to do is replace a couple gaskets, a brake pad, and a brake cable and mine will be hunky dory hopefully this video will motivate me off my butt.
@TylerRecchia90932 жыл бұрын
Love the channel and Awesome garage
@MiniBikeMike2 жыл бұрын
Thanks!
@freddymacke347 Жыл бұрын
hello, i m french, vous pouvez mettre un robinet d essence sous le cadre il aura 2 arrivé pour connecté vos durites et une sortie avec 1 durites qui sera elle relié a votre carburateur ,ainsi vous aurez l arrivé classique et aussi la reserve car le robinet a 3 positions,on off and réserve ,celle ci permet d arrivé a la pompe essence sans etres avec le reservoir vide,votre robinet n est pas le bon modeles et non adapter ,celui dont je parle est metalique et ne pose aucun probléme avec les tuyaux ou durites , j ai une réplique dax zenhua 50cm3 depuis 2014 ,il a plus de 12000km ,les répliques vendu en europe sont differentes,de nos jours elles sont vendu en injection mais tout les possesseurs en europe les transforme en machine a carburateur avec un changement de stator car celui d origine n est pas compatible pour la recharge batterie et l eclairage surtout ,bonne video et bonne continuation
@gibbsterbuilds53202 жыл бұрын
Hey Mike! I’m looking for a ct70 tbone and thought I might see if you had any leads bc I’m doing a build right now that I just found I can’t get a tag for😟😭
@gmyrick562 жыл бұрын
Mike, can you make a video on how to repair broken knob bolt in the handlebar or fix it so the handlebar be used? There is no videos on KZbin about it.
@MiniBikeMike2 жыл бұрын
Too funny. I actually made that video a couple days ago and was saving it for future posting. Give me a couple days and I’ll post it up.
@snakepit10115 күн бұрын
Hey Mike, thanks for the vids. Can you tell me the purpose of the keyed lock just in front of the ignition switch up by the steering and front shocks? I bought a lifan clone and it has this with a little metal cover that slides over it.
@MiniBikeMike15 күн бұрын
@@snakepit101 It’s a steering lock. With the handle bars in just the correct position, a hole on the steering stem lines up with that keyed lock. Inserting the key and turning it pushes a pin into the hole and prevents handle bars from being turned.
@snakepit10115 күн бұрын
@@MiniBikeMike Thank you!!
@juliohernandez4033 Жыл бұрын
Hi Mike, great video as always, where do I get that beautiful seat for my dax?
@MiniBikeMike Жыл бұрын
This seat came from: bartmotoco.com
@Hodenkat8 ай бұрын
I'm sure you've gotten this question a million times, but how much would you sell a bike like this for? I see you have quite a few bikes, so I'm sure you can't keep them all! 🤣
@MiniBikeMike8 ай бұрын
I don’t keep all of them. I collected and stored a few hundred of them since 1992. As I finish a bike, I sell it on this channel. I think I sold this bike for $1100.
@Hodenkat8 ай бұрын
That's wonderful! My brother had one of the first CT70's when I was 8 years old back in 69. Thanks for bringing back all the great memories! @@MiniBikeMike
@scottmagyar16 күн бұрын
Great video , curious is this or any bikes for sale, if so let me know I am local thks.
@MiniBikeMike16 күн бұрын
@@scottmagyar Every bike gets sold, after it’s completed. This bike is long gone. I do have a red CT70K1 For Sale. It has 110cc semi-auto engine and clean Indiana title, in my name. $1800
@scottmagyar15 күн бұрын
@@MiniBikeMike okay can you send pictures, thks
@MiniBikeMike15 күн бұрын
@@scottmagyar There is a whole video series, from when I built the bike, on my channel. The videos were posted around a month ago.
@scottmagyar15 күн бұрын
@@MiniBikeMike what color is bike , might find it faster , and whats the biggest bike too you build and sell, thks
@pjt33337 ай бұрын
I live in Maine, DO YOU SELL ANY OF YOUR CT-70 bikes?
@MiniBikeMike7 ай бұрын
Every bike gets sold, once it’s done and the last video has posted. All bikes are sold thru the KZbin channel.
@pjt33337 ай бұрын
@@MiniBikeMike thanks Mike....nice builds
@ironhead3202 жыл бұрын
I would love to find a Honda ct70 for sale
@MiniBikeMike2 жыл бұрын
I’ve got a red K0 with title for $2200.
@542magoo2 жыл бұрын
@@MiniBikeMike Hi Mike I am interested in your red KO. How can I get a hold of you?
@MiniBikeMike2 жыл бұрын
@@542magoo email: ct70help@gmail.com
@mikesmith962 Жыл бұрын
My name is Mike. I'm in southern Indiana I'm building a 74 st 90 Do u have a seat u would sell
@MiniBikeMike Жыл бұрын
Sorry, I don’t sell any parts. Made that mistake once…..it was a part I needed on the next build.
@sabian3562 жыл бұрын
I’m trying to buy a Lifan 140cc but some people told me that they don’t fit all Ct70. Does it fit all the frames?
@MiniBikeMike2 жыл бұрын
All CT70 frames are the same bolt pattern. Yes, it will fit.