Building a New Edge Mustang in 10 Minutes!

[@carsonchafin]

What’s your thoughts on this transformation? Thanks for watching!

[@danielmaranzana9132]

im thinking to do the same thing with my sub in the trunk. How well does that setup work ?

[@jesusnunez6503]

Had my new edge since I was 17 I’m 24 now and it has been an amazing car. I love the engine, not for the power, but for how bullet proof it has been. I’ve put the car through the ringer for sure. I’ve pulled out the engine, transmission (did the auto to manual swap too), the fuel tank, the head gaskets, the timing chain, the interior, and was able to put it all back together. I can’t say enough just how much I appreciate this year of mustang. Beautiful car man

[@jacobean87]

Yeah my 99 just runs perfect I never have problems internally

[@chrisperkins2543]

This is one clean new edge. Very nicely done sir

[@carsonchafin]

I appreciate it!

[@LoganStockard]

I agree

[@platybtww]

aye bro on the maintenance section when you were doing the oil, I couldn't tell for sure but it looks like your not using jack stands. USE THEM. They will save your life if the floor jack fails, I know someone who died from doing this. Beautiful stang tho brotha. STANG GANG

[@wesleydawson3168]

Absolutely love the car man I have 2 of my own. Manual swapped my 03’ a few months ago. I have plans to build the motor in my 04’ and throw a tork tech kit on it in the near future. Both cars have been awesome.

[@SvtAddict1995]

Love what you’ve done to it. Clean cruiser.

[@tacticalidiot175]

Nice car, but I'd recommend that you put a mild cam in there as well to be a proper build, and remove that cold air intake and put the stock one back on. That "cold air intake" is only taking away power. It's getting all that delicious 150 degree radiator air and giving you low air density.

[@isodeivys611]

Crazy this man pulled this off in only 10 minutes

[@carsonchafin]

😂😂

[@rock3rd]

Very nice stand and 239 to wheel is very impressive for stock

[@taylorcross3714]

like the build but i didnt see u put any caster camber plates on after putting lowering springs cant get the alignment back in spec without them

[@dschNgz]

Nice mods! How much lower are the springs ? If u beat on the car or drive for short trips, think about putting 5w30 in

[@dannyboy6294]

WOW ! How did you change the steering wheel and overpass the airbags ? Is this even legal ?

[@christiandancy7646]

Where did you get the manual swap kit from

[@matthewmartinez2012]

Hey man where did you get that steering wheel from???

[@Lunatikgixxer]

I miss my new edge. I have a newer 5.0 now but ill forever miss my cobra

[@ChrisPass69]

you got any socials? i literally have the exact same car and i wanna build it and need some help

[@LoganStockard]

This is how I’m making my 99 look

[@MrMoffatg]

Whats your exhuasy setup? Is it stingers only? Or do you have a mid pipe? Ride looks 👌 🔥

[@carsonchafin]

It’s just Borla Stingers as of now!

[@rolly5985]

Time for a whiney supercharger ;)

[@loganpinner5212]

Such a sick ride man! That shit is so hard

[@carsonchafin]

I appreciate it!

[@turbomikemx8830]

Great job!!!!….. Keep going bro!!

[@KiddKaliz]

I love this we need more 🔥

[@jamesvetter1797]

It looks like a mustang with a twist of jdm

[@JuanSoto-eh1gx]

Nice work 🫶🏼

[@gabrielmata6315]

HELLO BRO WHAT SIZE ARE YOUR WHEELS ???

[@josee5265]

What year? And can you send me the link where you bought the manual conversion kit cant find one myself

[@carsonchafin]

It’s an 01! And the manual swap kit was bought off of eBay from MPSAutoSalvage!

[@xokie666]

clean asf

[@maik4089]

I dream to getting one soon

[@LovelyTuxedo-ee9bf]

What’s rims are they

[@THEKINGMESS1]

Whats your wheel/tire setup? Looking for similar setup on my 03 vert.

[@carsonchafin]

The front is 18/9 on a 265/35/18 tire and the rear is 18/10 on a 285/35/18 tire.👍🏼

[@THEKINGMESS1]

@@carsonchafin any rubbing with the eibach lowering springs? Any fender rolling ?

[@carsonchafin]

@@THEKINGMESS1nope, fenders aren’t rolled at all and no rubbing.

[@mattjingles5758]

​@carsonchafin what caused the tire to separate then?

[@carsonchafin]

@@mattjingles5758I don’t have caster camber plates on lol. I was always going to switch to coilovers so I just never put them on since I bought them after the springs were installed. So, my car isn’t aligned properly do to having barely any camber. But those tires were on there for 3 years before it happened so I got my use out of them haha.

[@NathanEG217]

Shooo looks good.

[@carsonchafin]

I appreciate it!

[@eselexfox]

I got does same rims on my foxbody💯

[@LovelyTuxedo-ee9bf]

What rims are they

[@eselexfox]

@@LovelyTuxedo-ee9bf SVE series 1 wheels from LMR

[@cookielall6001]

Nice car, I have the same wheels at l luv em

[@gabrielmata6315]

VERY NICE CAR.

[@JermaineWilburn-w7x]

3650, trans

[@florider_hd]

nice work even tough its an ugly ass toyota looking car XD