Building A Shed Using All Reclaimed Wood

[@jannejanzen8481]

I honestly appreciate the bar being lowered. What I enjoy about your videos is that they are not about featuring the best and biggest projects but about you being 100% committed no matter what you do!

[@mrhankbotful]

I love this. Your style is like watching myself in some weird funhouse mirror it's so completely opposite of how I usually work. I have a friend the same way, and it's what I love about him. It's great to see the contrast and be reminded that the way I do things is definitely not the only or best way. Awesome work, love the videos, keep recording whatever weird stuff you like to build, I'll be back to keep watching.

[@simonowen488]

Best Comments Section on the Internet.

[@cranktowncity]

@simonowen488 totally agree with that!

[@victorsavinoff279]

Dude, if you're not planning to fully remove the nails from the boards, the quickest way to pull a pallet apart is with a sawzall, by cutting straight through the nails in between the boards. There's a plenty of bi-metal blades out there, that are specifically designed for cutting wood with nails.

[@hultaelit]

5:39 On the one project that is majority wood based, a small metal part still attempts to take an eye

[@tracybowling1156]

In my humble opinion, it's the cheapest way to build. Look @ all that fun your having. Plus, if my husband were doing this, I'd be having just as much fun right there with him! P.S. I have a 12 week old puppy. I'm so glad to see yours acting exactly like mine: sometimes a pain in the butt! But a very ❤️ able pain!! 🐕

[@Lozoot2]

I never trust a man with an organized garage. It's safe to say I'd trust Cranktown with my life.

[@danmurphy5660]

A mans shed and a woman's handbag is always full, no matter how big it is.

[@billhacks]

Cut the nails with a sawzall. the boards tend to split less that way. Awesome video. Great way to lower the bar! Thanks for sharing.

[@julias-shed]

It’s not a janky 2x4 it’s a glue-lam beam 😀 good fun and better than burning pallets.

[@chain3519]

By far my favorite KZbin channel these days! Can't believe it took you making a mug welder Ender 3 for you to get promoted

[@jordanbennett6461]

You have the cutest helper. I love the work so far.

[@nefariousyawn]

3:00 there is a pneumatic nail remover that seemed pretty cheap, last time I looked. It goes over the exposed end and punches the nail straight through the other side in a blink.

[@Vikingwerk]

Good progress! Pallets are a lot of work, thats for sure.

[@simonowen488]

You're beginning to make me look bad - last week, I declared pallets unfortunately unsuitable for building a deck. Mind you, the recycled puppet guys wanted $30 each. Tome to borrow a truck, weld up a pallet-destroyer and go driving! Inspirational as always, thank you

[@sjamesparsonsjr]

This is way above the bar! Keep up the good work. Stay warm, and watch out for flying screws.

[@AlexApol]

I don't see how you could call this a lower bar. This is great content.

[@АлександрСадко-с2е]

Thanks for lowering the bar, Pal ! such videos are interesting too.

[@jameslamb4573]

Love the little helper!

[@Sp3ncerSauc3]

I like the idea of the reclaimed materials. When doing the siding, definitely make it look as presentable as possible. The burnt wood look, when done correctly, looks amazing on a building, and will make the wood last a lot longer. I'd recommend still tyvec the whole thing, and maybe a metal roof if you could. It would save you a lot of time. You'd have a very robust building. Good luck man!

[@lumotroph]

Dude this is great to watch. Good job on making it cheap materials style. So watchable

[@Porkchop1999_]

Thank you for the awesome video~ I love the way your going about building this, Not just the slight jankey-ness of the reclaimed wood but the actually somewhat educational bits like charring the base wood to help with rot and The way you used the stays when lifting the walls Glad to see you having fun with the video ideas, Thank you for your hard work, Keep it up~ I hope your having a lovely day, Have a wonderful rest of your week, Be safe and Take care out there wherever you are (^=W=^)7 And you too fellow viewer~

[@super1515]

Dude! This is exactly what my unskilled, non handyman ass needed! I think I can actually do this! Thanks for the upload! Cheers! OH...and Janky...I thought we only said that in Atlantic Canada. Good to know the word is used universally!

[@nickwhitney1534]

Puppy stole the show❤👍

[@seanmyers227]

What a legend! I love this. I'm super glad you're putting out more videos!

[@JeremyRoberts007]

Glad to see new vids. I don't watch for the over the top projects (well, yea I do) but also because you are a hoot to watch. Keep it up. Glad the bar has been lowered.

[@ChrisBigBad]

SUPER thanks for getting EtCetra right. Cheers from a patreon with 6 years of frikkin Latin. What a waste of time =D

[@cranktowncity]

*exsetera lol Thanks man!

[@JohnJaggerJack]

Solid work.

[@bwimtg]

very cool project!

[@alstaxi2002]

You weren't shedding about different type of videos. I likes it

[@enricuhl]

Loving all of your videos, irregardless what you do!! I just recently discovoered this channel and your my favourite person to watch on here !!

[@askquestionstrythings]

A few more pallets and you could have done a triple laminate board, would still have the side/shear forces issue and buckling failure risks but a little less so. FB marketplace is sometimes a great source of reclaimed wood (but also can be a mess as some people tend to do FCFS and you can end up wasting time trying to get it).

[@erikburrows]

Puppy!!! Love her.

[@davidpage3893]

This guy is your typical “Bubba”. He is entertaining and should have his own show on the DYI Network.

[@grantfielder]

Noice dude, can't wait to see how it comes out

[@bruceboggemes9724]

Never seen such work before. Incredible!

[@Engineerd3d]

Awesome. I wish you were closer I would have delivered a few pallets and helped process them too.

[@GuardiansFX]

It reminds me all the material hunts I've done so far :) and with similar end results. Good job man, keep it going

[@DanielKezar]

Love this kind of video. Honestly just want to see more content. Don't care how high effort it is. This type of video reminds me of FarmCraft101 which is one of my favorite channels of all time.

[@colinloeffler3633]

Another great video! I think @BeauMiles could use your custom pallet ripper

[@Vegas5302]

I absolutely love the videos man keep it up

[@shoofle]

i'm so excited for your upcoming shed repair video!! ^_^ (joking aside i love your videos!)

[@makingstuffwales]

Great project! And awesome channel 👍

[@KieranShort]

Hopefully it holds up to the snow

[@crassbusinessman3122]

I left a dinger on every video I've watched so far. Because, they've all be great.

[@thaejsooriya3313]

Wooo loving the lower bar, more videos more better to me

[@RonNVids]

Love it. It's a storage shed, not The Ark! Looks great!

[@timspoor]

You know that triangle of cheap, fast and durable? And you can pick only 2? You did it the cheap and durable way, but it cost you time. It looks great though, I also watch Beau and appreciate his style. Good job!

[@pete3897]

Nice hat-tip to Beau. Just don't start eating beans ;-)

[@cranktowncity]

Hahaha I think he illustrated pretty well that is something I dont want to do

[@AlbertFilice]

Dude love your videos, keep it up!!

[@kob8082]

Looks good man

[@FinlayShellard]

I thought the bar was get lowered.. but no amazing content as always, can't wait to see you in your new shed making memories, just waiting for the tunnel between the two sheds bahahaha!

[@hamlander756]

Awesome stuff :D

[@warpedjester]

This is just one of those channels that's more realistic in building crap as opposed to. "Hey if you have 60,000 worth of tools you can do it too"

[@cbuckle5994]

Great video! You inspired plenty of men to attempt such jank, and in the end create a quality, not so sturdy fire hazard for the neighbors to complain about! But hey, the mice and racoons will gain a new house!... Hahahahahahahaha, jk.. Good stuff man, keep it coming!

[@Rouverius]

Nah, man, that's not "janky material" Technically it's "engineered lumber" 😉 Back in the day, my dad and I did something like this but about half the size... it took MONTHS to reclaim enough lumber. So, you're doing great, man.

[@quadmcjellydrone7909]

I have a garage, shed and hobby room all full so my advice, build two 😆

[@jonasstahl9826]

There is a rule of the universe, you always need 110% of the space you have.

[@cranktowncity]

hahaha yeah the last shed i built got overfilled within a few hours

[@johannvw1979]

if Namibian Dollars were worth anything I would sponsor you a sheet of plywood, But currently it would send my pension back 12 years. Maybe some day. I really love the videos dude. thank you!!

[@totallyi812]

Brother your awesome 👏

[@CIBERXGAMING]

these are good videos too!!!

[@TheRainHarvester]

Will the floor rot with no vapor barrier?

[@newmonengineering]

I have one of those, it's full. I still have no room. I need a larger house, or need to buy a proper warehouse to work in. I need to make some more money to afford either lol. The circle of life always. Cutting expenses helps only so much then its time to increase income. Happens all the time.

[@LesNewell]

I can tell you from experience that the warehouse idea only works for a while. No matter how much space you have, your stuff just grows to fit.

[@TheQsam1]

Love your videos, and also cool that you like beau. Wonder what a collab would be about

[@goatermcgoatfacetheprimaryoneL]

very good

[@Badge124]

Did you remove the bird feeder or knock it down when shoveling? :)

[@DuckshotProductions]

Dinger Smashed! I got to ask, why not use that nice brick as the floor?

[@memejeff]

Cranktown: I gotta lower the bar. Next video: Builds an actual house.

[@zumbazumba1]

I always liked your crackhead idgaf haircut and beard ! i like these hobo projects you do ,not everything needs to be fancy,run by arduino with 3 stepper motors! That will be one glorious shed !

[@beachboardfan9544]

Time aside, with all the glue and fasteners, theres no way this is cheaper than just getting 2x4's

[@craterinahole]

I spat out my Cheerios at the "disappointed bureaucrat.

[@Jkauppa]

one eternity later is only one moment

[@Jkauppa]

because I am

[@devinpauley6520]

I can’t believe you bought all that wood for just $60! lies I say!

[@Zimmon375]

You can do it

[@AC-vx3jz]

2 part videos are great - double the vids, double the dingers.

[@petithor]

PLEASE BUY A PNEUMATIC NAIL REMOVER. Free wood for ever, like my wife huehuehue

[@NicksStuff]

Note that the painted pallets are technically stolen, they belong to Chep

[@rhikheslop8583]

Hey dude where's part 2 love part 1

[@jonathanmaese12]

Before he mentioned the magnet i was thinking about why hed do this in the driveway

[@JonnySchaab]

L O W E R T H E B A R

[@marc_frank]

hey you trendy lil hipster boi

[@rayshadixon4246]

Yo dude bro, next time use a saw to cut the nails lose from the pallet. Cut your breakdown time in half.

[@nobodynoone2500]

I thought you were doin lower effort builds, ffs man. HMU some time and come out to the mountains with us.

[@nobodynoone2500]

p.s. you will just use the shed to collect more "useful shit" and your garage will still be as messy if my experince translates.

[@chug2138]

must not valuee My time at ALL with the "projects" ive got going.

[@tonyhill8300]

first !!!

[@hobbymachinist]

Oh, I will copy yours some day... great job....

[@marc_frank]

hey you trendy lil hipster boi